I also would like to thank you for creating this video. It saved me SO much time when putting drawers together yesterday, and once you do the tall drawer, the others are a piece of cake!!

Thank you!! I was able to accomplish alot of assembling because of your video. You explained it better than any Klearvue video I could find. I wish you would have made more videos assembling these cabinets.

Thank You! This video helped take a lot of anxiety away from me. When my cabinets arrived and I saw all the boxes; I thought what did I get myself into? I'm a 62 y/o lady who will be installing them herself. I have done several renovations...confident in my abilities...for now :),but never attempted cabintrey. This video was extremely helpful.

THANK YOU SOOOO MUCH! You made this a much easier project to tackle and sorting all of the pieces before starting was a life saver!!!!!!

Excellent video! I am a retired cabinet installer/remodeler, out of the business for more than ten years, remodeling a pole barn while living in it. The Klearvue drawer assembly had me bumfoozled before watching your excellent instructional video. As you stated at the beginning of your video, the Klearvue instructions are inadequate, to put it mildly. Though your step-by-step instructions were very clear and easy to understand. I came across one slight problem that you obviously didn’t encounter. While attempting to snap the drawer front into the guide assembly, the left side went in perfectly. However, the right side just would not snap. When looking at the mechanism, I noticed there are 3 Phillips-head screws in the adjustment mechanism. The middle one (to which there is a spring attached) had been somehow sprung into the locking position, and would not allow the mechanism to catch the bracket. I found taking a Phillips screw driver and turning that screw about a quarter turn opened the catch, and allowed the mechanism to engage the bracket. (In case anyone else has the same problem.) You’ve saved this old remodeler a ton of cussin’ and fussin’. Thank you!

Thanks a million dude I'll be installing these for a customer next week. Thanks for your contribution to the internet you're the real mvp.

Thank you!!! Your instructions were so appreciated! Whoever did the video, thank you for getting the close up shots on the instructions!

July 2022, i am finishing my cabinet installation (had a contractor do all the cabinets along the wall, i did the island a few months later). Island is secure just starting on the drawers. You should seriously get some compensation or something from Klearvue. Very nice demonstration and nice job installing your cabinet boxes!

Me and my buddy can build anything but the headache we encountered was heavy then we seen this and watched the whole thing. Thank you.

Thanks so much for this thorough explanation! It has saved me so much headache and stress as I assemble my drawers!

OMG can't thank you enough for putting together such a well made, Logical step by step video. I was ready to scream from using their awful instructions!! This saved me....thanks!!

Excellent video. My husband asked me to put the drawers together. Your video made it so easy!!!

Excellent explanation of assembling these cabinets. I wish I had watched it before starting my installation!

I can’t thank you enough for making this extremely easy to follow video!

This man put this set-up amazingly easy. A must watch!! Thank you! 🙌

Bravo!! Very, very, helpful! We are installing now and have confidence, thanks to you!

Great instructions, the ones from Menards are kinda cryptic. For the problem with no access for the second screw hole, I wasn't super comfortable with leaving only the one screw in the front so I just drilled a hole for the top row of holes in the bracket. There were no predrilled ones that matched up so had to create one - just used a 3/16 drill bit (same one used for the cabinet connector install) and marked the depth on the bit with a piece of tape so I didn't drill through. Worked great.

Great instructional video. One note: You *can* use two euro screws to attach the front mounting bracket on the drawer slides to the sides of the cabinet for a top drawer. But, to do it, you have to bore your own hole in the cabinet side, targeting one hole in the top row. Probably not necessary unless the drawer will be heavily loaded and used frequently, as for silverware or cutlery.

Great video! You provided informative, step-by-step instructions that made this project so much easier. Thanks!

The only way I was able to build these cabinets was with this video. I was about to pack everything up and send it back !!! Thank you because the direction were definitely a situation

Thanks, I like how you point out the little things like washing your hands or squeezing the sides together 👍

Best video of drawer assembly of those out there. Thanks.

Well done. I just followed you step-by-step and it was fantastic.

Thanks for the informative video...my cabinets were installed and then I had to replace a defective door. Made it so much easier!

So I'm installing these for the 2nd time. And still had to refer to this awesome informative video thanks man.

Thank you !!! This video is awesome It help me put it together better than others that I watched

OMG...thank you for this video, makes more sense of what I'm to do with these drawers.

I definitely had a WTF!? moment as I was watching this while doing research on the Klearvue cabinets that we are about to order for our kitchen. Not because of the great explanation, but because of the dude in the video! Great example! New subscriber!

I want to thank you for making this video. It saved me money, time, and frustration. I agree with the others that once we saw how easy it was to put the drawers together the rest was “a piece of cake.” Thank you again!

Thank you, the website didn’t explain what to do about the third screw for the upper cabinet, Glad to know I skip it! Very well done instruction video 👌🏽

This was a great helpful video! Thanks for the step by step process.

Excellent video and great instructions.

Great job, it was very helpful.

Excellent clear instructions. Thanks for all the time savings.

Very helpful and well done video!

How are the pre assembled boxes held together? Nails? Glue? Stapled? Thanks

A+ video, very helpful. All these years later, have you had any issues or regrets with Klearvue. I'm just starting my remodel. Have you done or found other install videos that were helpful? Thanks again!

Was wondering if the low drawer used the 5th and 6th Euro screw. Thanks for answering my question!

Super helpful and to the point, saved me from opening the instructions!

Make sure you use B bracket for the top drawer. We were getting very frustrated.

Thank you for a great video.

Looking at grabbing some of these for my first house! Kitchen needs help... How are they holding up now that you've had them about a year and half? Any feedback is appreciated!

Watched because we are considering this line. After using it for a few months, what are your impressions? Drawers still glide smoothly? Finish holding up?

THANK U SOO MUCH FOR THIS VIDEO!!

What do you think of the quality of these cabinets? Have you spent some time using them? I can decide between these or the IKEA’s Sektion cabinets. Any input would be appreciated.

Thanks for making this video .

Thank you for this!

Hey, thanks for your previous information but I’m in the middle of installation and have a question about screw placement for the low (small) drawer. Says to put 2 screws in fro t bracket but how do you get the screw in the “hidden” second front hole without stressing the railing??? Thanks.

Do you know if you can put the drawer runners in the cabinets before setting them in place connected to each other and the wall? Reason being my order is coming in partial batches and the drawer face hasn’t come in yet and I would like to get started.

Did you have any 155 degree hinges? If so, how do you adjust the speed? The 110 degree hinges have a little toggle switch that sped up the soft close function basically. Not seeing it on the 155s.

great job. helpful. Thanks

Hiiii!! How do you take the drawer off? I put my drawers in and assembled everything before putting my countertop please help!!! I try finding videos but there is only one to take the drawer front. Thanksss

Great job! Thank you

Very helpful. You are right about throwing out the instructions.

thank you thank you my head explodes without being able to put together a drawer everything will be easier good work

thanks for a great video!!!

Thank you SO much!! This was extremely helpful!!

Thanks so much very helpful video. Top drawer needs b would be helpful 😂 had to take that one back apart thanks again for video!!!

Good video! If adjusting the cabinet up or down, be sure to loosen the locking Phillip screw to the left of the adjusting metal Phillip screw or you will break off the Phillip (cam) screw like I did.

How do you take the drawer out once it’s in?

Thanks for making this Video 😜

Thank you so much! I’ve been trying to decipher those instructions for 2 days, dreading putting those drawers together!

Thanks for the helpful video. I'm about to purchase these, Menards wants me to buy a couple hundred feet of edge banding? Did you do that? (My doors will be white, your doors/drawers are white. Do I need white edge banding?) I know that's needed for Ikea cabinetry if one uses a dark door--the cabinet carcass is edged with white/cream and you can see a peek of it here and there with the doors closed. Is the Klearvue already edged, or is it bare particle board on the base cabinet front edges (meaning looking at it with drawers.doors open)? If you can answer that, your help is greatly appreciated.

Thank you so much!!

Did any of your drawer fronts come with defects? Scratches and small bumps? I just got mine last week and started inspecting them over the weekend and there’s a lot of defects.

i work in cabinets at menards but have never installed myself. this helped me alot!

Thank you so much for them video. Have put together Ikea cabinets previously. These instructions were terrible

do the Corner Cabinet Feet Need screws? Does the cabinet Come with these screws?

Omg, thank you!! The instructions on the paper are so confusing, 😢again thank you so much. 😊

Thanks for sharing!

The issue I'm having is I am trying to install a low drawer/ door combo on an 18" wide by 30" high base cabinet and I am having an issue with the drawer hitting the overhang of the counter...not sure how to alleviate this issue...

Cabinet boxes.....are the outside walls white or tan? I want to install the stromma but adding cover panels will mess up openings for appliances

Super nice works great

Thanks for video

THANK YOU 'THANK YOU AND THANK YOU AGAIN THIS VIDEO.

I see the lazy Susan...how do u adjust the shelf?

Best comment is near the 20 min mark: The top drawer only uses 2 screws. That should be in the instructions. Thank you.

Help!! In the front holes of the metal slides I can only get one screw in, the top rail of the slide is completely in the way to getting a second screw in front… even when I pull the top half completely out, I cannot clear space to get a second screw in it’s making us completely y crazy 😂 we got one in front and one in back of each slide.

Are the bottom of the legs suppose to show, on the cabinets..

Check out my video for the 3 year review for these cabinets: kzfaq.info/get/bejne/hMqdg8qW3ZnPY40.html If this video was helpful and informative, it would mean a lot to us if you could hit the LIKE button! Check out some of our other videos. Thanks for stopping by and watching!

We are having the hardest time with our island drawer and cabinet install. They don’t seem to match up no matter how we try. Either the cabinet is too high or the drawer doesn’t fit

Do you have a video on how to install cabinets ?

Omg we are installing these in our kitchen this weekend. It has been a struggle. No directions or what all the little pieces are for.

Once the drawers are installed, do you know how to get them out?

Really interested in putting Klearvue cabinets in my home but the quality is hard to determine. I cant find any resources online or reviews. How are these holding up for you? Are you still happy with the choice?

Idc what anyone says, these klearvue cabinets are the most confusing and annoying cabinets on the market. There’s absolutely no need for the million tiny pieces, screws, etc to assemble simple cabinets. Putting these together is maddening

😂😂I not got instruccions

DO NOT BUY THESE CABINETS IF YOU VALUE YOUR SANITY AND TIME. If you care about neither of those things, then by all means buy them.