Installing and Using Hinges: Woodworking Beginners #19

Рет қаралды 419,050

9 жыл бұрын

In this video I review Installing and Using different types of hinges.
Easily the most common hinge in the world is the Butt Hinge, and it comes in many variations, sizes, materials and coatings. In this video we look at a variety of types of hinges and give some tips and suggestions on how best to install them.
******************
Beginners Woodworking Series #1 to #10: • Woodworking for Beginn...
Beginners Woodworking Series #11 to #20: • Woodworking for Beginn...
Beginners Woodworking #21 to #30: • Woodworking for Beginn...
******************
** Read Full Article Installing and Using Hinges - goo.gl/VjEsU0
** Like me at Facebook: / woodworkweb
** Follow me on Twitter: / woodworkweb
** Join me on woodworkweb: www.woodworkweb.com
** Connect with me on Google+: goo.gl/7fotJq
**** Subscribe here - / knecht105

Пікірлер: 113

@h.s.6269 Жыл бұрын

This was so amazingly helpful! I'm a beginner in both carpentry and diy so just trying to even understand the basics can be hard because people assume you already know. I'm trying to build just a coop but I'm using it as a practice for pretty much every skill related to it. I'm sanding, staining, building doors, using trim to hide the end of the hardware cloth, etc. I'm hoping to later use the skills to build my own customized furniture.

@nickySe7en666 3 күн бұрын

Thank you for a very helpful, beginner friendly video.

@mekahami 4 жыл бұрын

You continue to be my “go to” source for this kind of info Colin. Thank you so much!

@pennyroyal3813 8 жыл бұрын

Thanks Colin. I'm just learning how to install slides and hinges. Your tips will be very helpful.

@thibodoux 4 жыл бұрын

Something that should be simple, but to a newbie woodworker this information is so valuable! Thank you!

@patrick1448 3 жыл бұрын

COlin, you are a great source of knowledge and inspiration to me, a novice, an amatuer wood worker. Thank you Sir for your posts. Greetings from New Zealand. Stay safe and healthy

@paulprs9703 8 жыл бұрын

Some great advice on here as usual thank you very much I have struggled with hinges on a few occasions being a basic DIY have a go so this will help such a lot

@barbaracherington8703 Жыл бұрын

Thank you so much for this informative video. it answered exactly the questions I had about which hinges to buy. It's quite confusing to someone not familiar with all the different ways a door can be mounted. You made it crystal clear. Thanks so much!

@scannon90 4 жыл бұрын

Thanks, Colin, that was your most helpful video yet.

@modianos 6 жыл бұрын

Very informative. Thank you for making this!

@talstack9823 3 жыл бұрын

Very useful, Liked how you dragged the chisel back to find the notch. Thank you

@sherrieh847 2 жыл бұрын

Thanks! I needed info on how to install butterfly hinges. I didn't know about the centering bits--cool!

@johnbergholm 6 жыл бұрын

Thank you, this was extremely helpful.

@geedubb2005 9 жыл бұрын

I remember helping my dad hang doors. He chiseled the recesses perfectly. Marked everything with his pocket knife. Pocket knife, pencil, chisels and planes were always sharp. Used a yankee drill for the screw holes. Drilled for door knobs with a brace and bit. It was great and I miss those days! Anytime he or I needed a marking guage type thing, we just made one.

@knecht105 9 жыл бұрын

Gee Dubb Thanks for comment, I love hearing stories like this of craftsmen working at their trade ... thanks for sharing your memories

@duster. 7 жыл бұрын

Thanks Colin, very informative.

@TheShavingWoodWorkshop 9 жыл бұрын

Great explanation for this Colin - I really like the veneer shim idea.

@knecht105 9 жыл бұрын

The ShavingWood Workshop Thanks Tommy, appreciate the comments

@Boomers_Bud 9 жыл бұрын

A excellent topic Colin. This is one of the make or break issues whenever a lid or door is to be put in place. Mess this up and it can really effect the final outcome of our projects. An excellent video Amigo. Derek

@knecht105 9 жыл бұрын

GiddyUp994 Thanks Derek, yes I have had a number of emails and comments about hinges lately from subscribers so thought it was a good opportunity to take about them ...

@brendandobson7368 6 жыл бұрын

Colin is brilliant , explains everything so well 👍

@knecht105 6 жыл бұрын

Thank You!

@ellenslavitz8600 6 жыл бұрын

Wonderful explanations. Thank you.

@KeepingHouseAndHome 9 жыл бұрын

Yah...this arrived just in time. I'll be installing butt hinges in a hidden door I'm making soon. If only you had a video on that. Anyway, another great instructional video. I feel like a have a woodworking mentor in you and your videos.

@colinfarrier3668 9 жыл бұрын

Colin, another great video. I watch all your videos and always learn something new. Thanks Colin. Colin from Northern Ireland

@knecht105 9 жыл бұрын

colin farrier Thanks Colin, always great to hear from you

@maxinewood8220 11 ай бұрын

Thank you so much for sharing I really had a hard time finding a video that explains the way you do. 😃🌻

@toodle171 7 жыл бұрын

I'm glad I have you to turn to when I'm doing something new. Thanks!

@sarahgherciapuf5339 4 жыл бұрын

Such a great explanation. You are amazing!

@catfishcave379 4 жыл бұрын

At the risk of being called out for constantly repeating myself; I learned a lot from this video. I learn so much from watching your channel.

@AquariumCustom 8 жыл бұрын

Wonderful video, exactly what i was looking for! I was very confused about putting up any sort of hinges, and that was what made me fear starting up the woodworking hobby. Thank you.

@AcornHillHomestead 2 ай бұрын

Thank you. Great demo!

@brianjorch 9 жыл бұрын

A couple of tricks and great info, thanks!

@knecht105 9 жыл бұрын

Brian Kristensen Thanks Brian

@ajiththai 9 жыл бұрын

I really liked it, thank you very much for the video once aging for taking time to helps us out.

@knecht105 9 жыл бұрын

Ajith Kumar Hey, thanks buddy :)

@LucianoBSQ 9 жыл бұрын

I love your beginners videos, they are very useful.

@knecht105 9 жыл бұрын

Luciano BSQ Thanks for the feedback, appreciate you taking a moment to give it

@Gunz4President 8 жыл бұрын

Good job, thank you.

@CelDez1 11 ай бұрын

Thank you very much. This video was very helpful.

@kimhunter2532 Ай бұрын

My surface hinges are old as is the cabinet that they came off of. I'm having trouble putting them back on because they have been off for months. So according to your video, I should put the hinge on the door first, then the wood wall. And I found small slivers of wood under some of the hinges,I guess it was for proper fit? My home is over 100 years old I've learned many things on the old cabinet work.

@olivepressdesign 9 жыл бұрын

Thank you so much for taking the time to educate so effectively.

@knecht105 9 жыл бұрын

olivepressdesign No problem, thank you for taking a moment to comment

@sung7245 6 жыл бұрын

Thank you for this excellent video.

@wawa4242 6 жыл бұрын

realy thankyou great explan

@mel-robgz2566 3 жыл бұрын

Thank you Colin

@elinesophie6134 5 жыл бұрын

Thank you very much!

@morbjrn5265 7 жыл бұрын

I'm struggling to install triangle gate hinges for a recording booth. I want it to open the door in and out, which is why I'm using the gate hinges. I seem to always put it on crooked. I have little room to work. This video helps me get a better idea about how hinges should work, as I'm new to carpentry!

@suemel1716 8 жыл бұрын

Thanks for this great video. I need to hang butt hinges in two different ways for two different uses. I have never worked with hinges before and your video has given me the confidence to go ahead and try. PS: your video was not too long.

@knecht105 8 жыл бұрын

+Sue Mel1 Perfect ... glad this was helpful

@lucasregiscardoso 9 жыл бұрын

maravilho aprende bastante, obrigado!!!

@knecht105 9 жыл бұрын

lucas regis cardoso Thank you Lucas

@MahmoudMouradSidky 4 жыл бұрын

Great video, thnx

@frankorona1 9 жыл бұрын

Excellent explanation, thank you for sharing your knowledge.

@knecht105 9 жыл бұрын

Francisco Corona Thanks Francisco

@taktuktaktuk993 5 жыл бұрын

03441796134

@CrouchingShiba 9 жыл бұрын

Thank you! :)

@regbowes1127 5 жыл бұрын

Thank you!

@huukietnguyen2355 6 жыл бұрын

Thank you for this video

@knecht105 6 жыл бұрын

You are welcome!

@Delmar829 9 жыл бұрын

Thank you good info.

@knecht105 9 жыл бұрын

Delmar829 Thanks Delmar

@RCvolo 9 жыл бұрын

Great video Colin

@knecht105 9 жыл бұрын

RCvolo Thanks RC

@ajiththai 9 жыл бұрын

Thank you for the video, i ignored most of the useful thinks you told in this video and my mirror door will now get a good treatment after learning form you,

@knecht105 9 жыл бұрын

Ajith Kumar Excellent, thanks again for your comments

@cillyede 9 жыл бұрын

Great video, thanks. hubert-germany

@knecht105 9 жыл бұрын

hubert Ko Thanks Hubert

@ralphconnell8163 4 жыл бұрын

This is very helpful. I dread hinges, can never get them right. This has helped a lot.

@knecht105 4 жыл бұрын

Thanks for watching!

@BackyardWoodworking 9 жыл бұрын

Good info Colin

@knecht105 9 жыл бұрын

Backyard Woodworking Thanks Roland

@kimhunter2532 Ай бұрын

My hinges are butt hinges for one set of doors and butterfly or surface hinges for the other set of doors.

@chrislc35 6 жыл бұрын

good video. im making a storage bench, but only half of the bench will open up. bad thing is, i dont want the hinge to be there as u sit on it. anyway i can do that? hide it almost from the surface?

@jeffoldham3466 4 жыл бұрын

i just put some on a box collin,,i got it after alot of trial and error,,do they make a jig you can use to make it simplier using your router

@paulinebambalos4863 8 жыл бұрын

Hi there I am installing a door that sits on the outside of my panel and the opening drops down as its a cabin. What is the best hinge? I bought the butterfly hinge!! Thanks

@hansdegroot8549 8 жыл бұрын

I just found out that you made two playlists with videos for beginners. I watched them nearly all. They are very useful. But I cannot find nr 18. Where is it?

@GentlemanH 4 жыл бұрын

Hi Colin, Is it possible to install a butt hinge upside down? I am specifically thinking of the hinge type which has bearings. My common sense tells me that both bearings should share the load of the weight of the door and hence the hinge can only be installed one way. My observations however, tell me that the hinge is manufactured for either way up but then only one bearing will take all the downward force of the weight of the door. Any advice would be welcome. Thanks for many informative videos and your clear voice without any "music" and hype.

@amirhouseingholinia2023 6 жыл бұрын

I wish you could install the hinge in the middle, the closest one (brass) to you right next to the white hinge.

@3993cedarlake 5 жыл бұрын

how do I get the right placement for angled fold down door?

@shashikant1061 7 жыл бұрын

nice

@knecht105 7 жыл бұрын

Thanks!

@RHG412 7 жыл бұрын

I know it's not your job to help me, but I have a project I'm working on that I have a couple questions on (HINGES) and I am STUCK. I am reno-ing a china hutch. Put in new glass, painted inside and out and now am to the point of re-hanging the doors. I don't want to use the old ones-ugly, dated, ick-and am trying to find some new ones that will work. Unfortunately surface mount hinges won't work because the doors and cabinet have a routed edge. But Do the new hinges have to be the exact same size (width, thickness, depth)? I've tried some and can NOT get them to work and so am now in the process of filling all the screw-holes and starting from scratch. Got any help for me? Thanks!

@marcelosappia237 9 жыл бұрын

Excelente Video. Querría saber como se llaman esas mechas para poner los tornillos de las bisagras. Gracias y felicitaciones de nuevo desde Córdoba, Argentina

@knecht105 9 жыл бұрын

Marcelo Sappia Thank you for your comments, and greetings to you in Argentina. I have not been to your country but it looks like a beautiful place.

@susanbartone7620 Жыл бұрын

I have semi-exposed kitchen cabinet hinges. Is it difficult to change the hinges so they are hidden

@ltly68 7 жыл бұрын

what happen to the partial insert hinges?

@milkyway808 2 жыл бұрын

Sir,I need a hinge for plexiglass where can I get those can I use regular hinge?

@alexclark6777 6 жыл бұрын

What happened to part #18? It's not in the playlist...

@RJJFavorites 9 жыл бұрын

Hi Colin, Thanks for the video. In regard to Butt Hinges is there any reason that you use the marking gauge when scribing the timber for the long edge of the hinge, rather than turning the hinge over, pushing the knuckle/pivot up against the edge of the workpiece and scribing along the edge of the hinge? This is how I have done it previously, just wondering what your take is on this method. Thanks again. Jon

@knecht105 9 жыл бұрын

RJJFavorites I like to use the marking gauge because it allows me different distances of hinge depth and still gives me a nice straight line to follow. There is nothing wrong with how you are doing it, I use the same method from time to time ... I always say, if it is working for you, no need to change :) ... thanks for posting Ron, always good to hear what others are doing.

@treasureman1198 5 жыл бұрын

I used a piano hinge to make a collapsible display wall what kind of latch or support can I use to keep it open

@knecht105 5 жыл бұрын

Thanks for the tip and thanks for watching!

@aaronrodriguez110 7 жыл бұрын

I have a sneaking suspicion that you're from the North or youre canadian... Great video btw

@johnhilgeford9928 8 жыл бұрын

I enjoy your videos a lot. Please adjust the camera settings to get rid of the "flashing" when you have white or shiny objects on camera, it's very disconcerting.

@johnpoe7632 6 жыл бұрын

I got rid of my perfectionism in codependents anonymous..........

@candeevaniderstine5317 8 жыл бұрын

Thanks for the video. You did not include anything on barrel hinges. Do you not like them?

@julieduchek2969 8 жыл бұрын

you failed to show how to attach a but hinge to the door

@TheHoosierphilly 2 жыл бұрын

Full Back-to-Back Wrap-Around Hinges installation ????

@vashon100 4 жыл бұрын

3:33 Will the other person in "we" ever be shown?

@JetEngine85 4 жыл бұрын

Will you ever be smart?

@paulmac3307 4 жыл бұрын

Do you know anyone who wants to buy Brainerd 4" Zinc Plated Strap Hinges? I have over 3,000 of them. Thanks!

@MrJFoster1984 4 жыл бұрын

What about a parliament hinge?

@lillildipsy49 4 жыл бұрын

Helicrete Sydney cancelled by boris sorry mate

@quabledistocficklepo3597 5 жыл бұрын

I'm a real beginner, but even I can see that the hinge is not properly lined up at 7:31. It's WAY off. Anyone can see that. Why didn't he?

@lindabaldridge4438 Жыл бұрын

You never covered the third group of hinges…

@paramedialab 4 жыл бұрын

Half of this video is for "the most common butt hinges", and you didn't even install them so we can see an example of how you fit them properly. Only talking...

@aqwood6430 9 жыл бұрын

Twenty minutes of explaining hinges? I think you should make shorter videos. I almost always edit mine to less than five minutes.

@knecht105 9 жыл бұрын

aqwood Thanks for your comments, the problem is when I make them too short people complain that there isn't enough detail and in the end, it's not about the length of the videos, it's about ... are you giving enough detail to engage. If you find them too long, just press the speed-through button :)

@aqwood6430 9 жыл бұрын

That surprises me... I thought that people like to see the same amount of detailed content in shorter time. You are also making different kind of videos than I am, this is a how-to for beginners, not sharing your projects for busy people with too many subscriptions already :-) So more detail is needed. Thanks for the reply.

@Toto-is8ci 2 жыл бұрын

Too many tools!!! I don't have half of these. Will keep looking for someone who is doing this with hand tools and ruler. Thanks anyways

@ginarios9442 7 жыл бұрын

Thank you very much (Tudah Rbah, in Hebrew). The real Name of the Creator is Yah (short version). The long Name, asd told to Mose, is Hayah asher Hayah. Do the 7 appointed times, as written of in Leviticus 23. Shalom and ahabah (peace and love ) from our home to yours.