No video
KNX Tutorial 9: HVAC using KNX RTC
Рет қаралды 7,315
3 жыл бұрынTo watch my all videos please visit www.smartknx.co.uk.
In this Tutorial I am trying to explain how to control Mitsubishi AC by KNX Thermostat "ABB Tacteo Thermostat".
I have done one small mistake here. you can not link the RTC mode with the AC control mode as they are completely different things. I did not link them but I said you can link them which is not right.
Please do let me know about your feedback and don't forget to subscribe for more useful videos.
Thanks for watching
Gohar Rashid
@elecdomotica231 3 жыл бұрын
thank you Sir for this tuto it's very helpful
@abbasjradi5001 3 жыл бұрын
Thank u sir, brilliant as ever ❤
@aktakonsystemintegrationsl858 3 жыл бұрын
Very good tutorials! Thanks for all!
@KNX-expert 3 жыл бұрын
You are most welcome. Thank you for your feedback.
@ahmedbelazi2318 2 жыл бұрын
@@KNX-expert Hello Can you send me your email... I have questions about the knx.. I want you to help me with..... Thank you 🙂
@mohammedabdulhameed1602 5 ай бұрын
Sir can I get notes similar
@amaaramaouc8218 Жыл бұрын
Thank you a Nice video.
@KNX-expert Жыл бұрын
Thank you too
@puneetsharma9869 2 жыл бұрын
Nice video.
@KNX-expert 2 жыл бұрын
Thanks
@ahmeddhaa2180 3 жыл бұрын
Thanks 😊
@MrAsadullah321 3 ай бұрын
Hi everyone! I need some help with configuring cooling command for ABB LFA/S1.1 FCU actuator to get a trigger from Busch trition 5/10 fold switch. I am confused on linking group addresses. Can anyone help? Thanks
@davide6365 Жыл бұрын
everything is clear but i have one question: on my fancoils as in all fancoils we have 3 fan speed plus automatic fan speed, so how can i set the automatic mode for fan speed? in this case i can just set low, medium and high. Thanks in advance
@seda14us 2 жыл бұрын
Thank you.
@KNX-expert Жыл бұрын
You're welcome!
@Anar900 2 жыл бұрын
Hello friend can you connect to my knx system through teamviewer ? I need service
@KNX-expert Жыл бұрын
What service do you need?
@bilguunbatsuuri4733 3 жыл бұрын
first of all thank you for your tutorials. it helps me a much i have a question about ETS. how do i upload my ETS program to devices? I mean do i must only use KNX IP router to upload or is there a any other way to do that? for example, if i am using only actuators and iswitch to control lights, how do i program it?
@venkateshdevadiga2528 3 жыл бұрын
You will need downloading interface for that.
@mahammadsathalya647 2 жыл бұрын
Hello, I am trying to program Siemens RMS705B ..Did you work on it before .. can you share any test program files of AHU programming ??? would be highly appreciated..
@KNX-expert 2 жыл бұрын
I haven't used this product.