Thanks this really helped me find my problem . I used a cheap fuel filter from scam mazon 😅 and it disinigrated in no time sucking junk into my carb the jet was clogged bad with a crap load of filter material . I knew I should have bought a good filter . But lesson learned . Thanks great video

Hey man, this video allowed me to completely fix my mower/carb. Super appreciated.

Great video man! With the help of this video, I went from never dismantling one of these or knowing how they worked, to taking it apart figuring out what was wrong and ordering a repair kit. I really like that you put the links for the items and to your other video too 👍 My carburator was a different part number than the one in this video, but the internals are pretty much the same.

Thank you so much for this well made video! I have my rebuild kit on order and this step by step was exactly what I needed!

Thank you for the awesome video my friend. I am so glad I found your channel and I will now be following you. I just followed your video to the T on the exact same carburetor and my cub cadet Z force zero turn is running 100% better!

Thak you. I'll try it when the sun comes out again.😊

Nice shot with the carb cleaner 😂 oh yeah cool to see you coming to the shop from the basement..🤘🏽 great vid, good info.

Best advice to get my 1045 running again Check the solenoid ~ I'd had problems with water contaminated fuel ( so I thought ) in a few different machines So when my Cub LT1045 died and wouldn't restart I assumed the fuel problem again But I had run the machine for half an hour before the motor quit ??? Hhmmm, wouldn't it have drank the water at the bottom of the tank first ? HHMM ? Watching your video (especially the last part explaining the purpose of the solenoid ) This sounded like a possible cause ! ;-)> Checking the solenoid ... there was the power plug dangling down in the wind Plugged solenoid back in but then found the battery dead from leaving the key on , DOH ! Battery went on the charger overnight . GREEN LIGHT GO !. ( Overnight I had a BAD DREAM that it STILL had the same nostart 🤮 ) BUT when I put the battery back in SHE FIRED RIGHT UP ! Thanks Mower Man Mike You're a genius! My lawn is cut and my neighbors don't hate me any more 🤓

Great Video 😃 i accidentally put diesel fuel in my 24hp cubcadet twice 😂 but this time it shut down.so i changed the oil and filter and cleaned the spark 2 spark plugs (after I put in the new oil and filter and drained the gastank and put new fresh gas in the Cubcadet,it fires right UP! but starts sputtering again (but) watching Your great video several times,its nighttime here in Alabama area now ,11pm so ill watch your video again and then see if I can get it going 😇👍

Thanks!

... Ohhhh yeah! i forgot to mention (yeah)i need to purchase a new air filter! i checked it out and its super Clogged!! so I'll buy one and then double check everything and let you know how I came out 🙏😁. CJ

Best video I've seen on this Carburetor. I have the same carburetor on my Cub Cadet Zero Turn. It is marked Walbro LMC. My engine surges (too lean) whenever the blades are not engaged. I purchased a new Carb and that fixed the surging for 6 months. Now doing it again. I have cleaned both carbs per your video to no avail. It is annoying that you can't adjust these carburetors. I'm to the point of drilling out the jet as I don't want to purchase another Carburetor every 6 months. I know running lean is bad for the engine Any suggestion before I pull out my drill bits?

Great video man. I have done everything you have said. Everything appears clean, put it back together and when I start the mower gas sprays out my muffler! Maybe bad carb? Could you tell me where to find this exact carb you are working on? Or maybe an idea of what wrong? Everywhere I look I see carbs but none of them list my model koeler the 725-3055..

Great video, great guy... Subscribed bro💪💪.. Any local shops sell carburetors where your at?

Im trying to remove/replace carburetor on super lt 1554 and need video on removing..i ran into issue after removing airfilter housing and cant get carb off because bracket is in the way

One other thing... I am working on a Cub Cadet 1046 w/courage 22HP motor and trying to remove the engine cover. Am I wrong or does one have to remove the fuel tank and shroud just to get the engine cover off? Is there a simpler way of doing it?

If you have access to it, can you just take off the bowl with the carb still on the mower? I have one I suspect the fuel solenoid is all that's wrong.

I see you took the seal off of the backfire solenoid. Mine was stuck in the closed position. I cut the plunger off mine and unplugged it. Is that a bad thing?

Can that solenoid be tested? Do you they sell that as a replacement? Great Video

do you have a video on how to take it off the mower?

My cub cadet is flooding really bad. Kohler engine. The throttle control does not want to push up and down. Any idea how I can unstoppable carburetor without taking it off. I'm physically challenged and cannot take it off. Gas is in the oil and air filter reeks of gas.

I think it was cleaner' before , you started messin' with it 😜 🛠 It still' was a pretty good video tho' 👍

Do you know the serial number of the carb?

I don't need to see the video but had to say i keep seeing those mowers going in and out of the shop And wonder why is it really breaking down on those people that much or are the shop people even working on it when they bring it in i watched one womans mower like that one go to the shop about 4 times this summer this month made it the 4th time

Dang you got a concealed Carry permit for those GUNS???

The kits cost way more than the whole new carb...

I will tell ya.. my kohler and I have a love - hate relationship!

Who’s got tickets to the gun show?