What is Wheel Offset? (Quick & Easy Explanation)

Рет қаралды 166,730

Жыл бұрын

By far and away, the MOST FREQUENT QUESTION we are asked here at KONIG is "What is Wheel Offset?". We find this really strange because OFFSET really is very simple to understand. Wheel Offset is the distance between a wheel's mounting pad, and the centerline of the wheel. Let's break this down together in a visual way so that's it's easy to understand!
Wheel Offset is an important thing to understand because it determines how a wheel will sit on a car in relation to the rest of the vehicle. We see wheels in a variety of sizes and offsets out there, the reason for this is because there are a lot of different cars out there to fit! Offset helps wheels of different sizes fit onto cars of different shapes and sizes. For more information on other terms like Backspacing, Load Rating, PCD, Bolt Pattern, etc... give us a Subscribe because we make tons of informative content like this every week.
00:18 - what is wheel offset?
00:34 - wheel width / centerline
00:41 - how to find the centerline
00:46 - fact about measuring wheel width
00:56 - mounting pad
01:14 - distance between mounting pad and centerline
01:31 - positive offset
01:40 - negative offset
01:57 - meaning of "ET"
02:13 - "ET"/Offset on a website
02:46 - from OE offset to aftermarket wheel offset
If you have more questions about Offset, we've done a bunch of videos on them, including these notable ones:
• WHEEL OFFSET FREQUENTL...
• OFFSET, LOAD RATING, P...
• Understand Wheel Specs...
• Achieving the PERFECT ...
If you enjoyed this content, LEAVE a COMMENT below and let us know what you'd like to see next! We appreciate the support and feedback!
#offset #wheels

Пікірлер: 135

@ThomasTheTankEngine22 5 ай бұрын

This is probably the best video to explain it. Not stupid long. Has visuals. 10 out of 10

@konigwheels 5 ай бұрын

Appreciate you!

@sarcastic_toast Жыл бұрын

Finally, a video that is short and gets straight to the point! Appreciate the video!

@ramonjrusa Жыл бұрын

Had to watch this a second time to grasp the off set issue. Too bad you didn’t show a rim animation scene on the mustang showing the fitment on the car displaying differing off sets as stated. Thank you for this tutorial

@jordanhansen8631 4 ай бұрын

I agree, didn't actually help a whole lot.

@CooeeCharlie 2 ай бұрын

Sweet dude that was soo easy to comprehend! Illustrated diagrams with dimensions, is all us new-to-the-scene crew need to understand the technical specs. Keep up the good work.

@konigwheels 2 ай бұрын

Glad it helped, we appreciate you! We make a bunch of these videos in the hopes of spreading solid information about wheels out there. Thanks for checking out the video.

@ebkjonny248 Ай бұрын

By far the most detailed/ easy to learn explination I’ve come across. Thank you. 🙏🏻

@konigwheels Ай бұрын

Glad it helped! Appreciate you!

@germanp3645 4 күн бұрын

We get confused because there’s not many videos where explain it well. I knew what’s it was, but that last example made it clear on how mush negative offsets I need for my car

@balam574 Ай бұрын

After discussion about a 35mm offset, why didn’t you summarize what was taught with an example of a car with an existing 35mm offset ( like an Acura RSX or Honda) and then change that? It would have made this instructional video so much less confusing to many people. Thank you for taking the time to put such a nice, short educational video together for car enthusiasts!

@konigwheels Ай бұрын

You're totally right. We thought the illustrated example showing the subtle offset difference would have been enough to visually cap it off, but we've seen a bunch of people wishing it had been more obvious and in depth there. Thanks for the feedback!

@OMACARacing11 Жыл бұрын

well said and explained... Thank you for this! :D

@konigwheels Жыл бұрын

Our dude!

@OMACARacing11 Жыл бұрын

@@konigwheels 🙌🙌🙌

@Azureecosse 11 ай бұрын

Thanks for the explanation I kind of knew this anyway, for me I want to know what offset is acceptable for my car I have a 2020 CRV with 7.5 inch width wheels Offset 45 I want to start using a set of older Honda wheel I have to mount Winter tires on they are 7 inch wide with a Offset 55 this means their will be a negative offset of 10mm I just need to know if this would be safe acceptable without having to modify the Geometry of the cars suspension, or is it a bad idea to attempt this any ideas on this would be appreciated ?

@denismanace 4 ай бұрын

Thank you buddy, great video.

@yorkie1792 6 ай бұрын

Bravo well explained

@_bermuda Жыл бұрын

Simple, straightforward, visual.

@gnawbabygnaw 9 ай бұрын

I’m one of those easily confused types. I wondered if Backspace and Offset were different things. Sounds like they’re basically the same. Like do rims exist that in their specs or description they list Backspace And Offset?

@fly-over1517 3 ай бұрын

Best explanation ever...thank you

@konigwheels 3 ай бұрын

Absolutely, glad we could help out!

@binkhalifa2004 Ай бұрын

Could have done better but it's the best I've ever seen that explains the offset concept.

@Spectxrr 9 ай бұрын

literally a GOAT for making such a simple yet understandable video

@konigwheels 9 ай бұрын

appreciate you for watching! Glad it helped!

@theboss4806 Ай бұрын

The best video 🔥🔥

@harpreetdhaliwal773 7 ай бұрын

Amazing!

@konigwheels 7 ай бұрын

glad we could help!

@GameMe247 11 ай бұрын

Hey thanks for the information, it’s actually makes really more sense right now for me I was looking for rims and wheels for my car and the option is 255/35 R19 8,5 ET 43 that’s what is recommended for my car but the problem is I have not found ET 43 I have found ET40 or ET45 are you really don’t know what to do

@konigwheels 11 ай бұрын

What car are you trying to fit?

@GameMe247 10 ай бұрын

@@konigwheels F30 BMW 318d 2015

@gordendavis3585 9 ай бұрын

$40 Et to 45 ET isn't much of a difference in millimeters 43 would be a sweet spot.. just make sure your offsets are the same all around Front 43 Rear 43 etc etc unless you want a wider stance in the rear

@shaolongchen 2 ай бұрын

best animation to understand this omg finally

@konigwheels 2 ай бұрын

Glad it helped!

@KoolWooDidIt 6 ай бұрын

Good video guys

@konigwheels 6 ай бұрын

thanks for watching!

@greasemonkeybd Ай бұрын

I have a ford fusion with a 225/50/17 with a 44 offset and i want to put on a 205/60/16 tire with a offset of 50 (Mazda 3 wheel) would that work?

@afterrecession 3 ай бұрын

interesting. thank u so much!

@konigwheels 3 ай бұрын

Glad it helped!

@theamazinggoldfish8713 8 ай бұрын

Question please, I have an 2021 Impreza which came with 225/40R18 tires. I'm wanting an smoother ride. The same car came with 3 different wheel sizes 16" 17" & 18". I'm wanting to change to the 16" wheel and the 205/60R16 tires. It should be fine .....right 🤔?

@konigwheels 8 ай бұрын

the car came with a 16, 17, and 18 all mounted together? haha, that's bizarre. Firstly, changing your sizing to the same size all the way around (square setup) will improve your ride quality immensely. It looks like you can run 16" + 17" comfortably with a 205/55R16 (around that range). Also, grab some hub-centric rings to prevent any vibration.

@paulmason1690 Жыл бұрын

Hey guys, looking to purchase VARIANT ARGON new set of wheels for my Nissan max seven GEN I have power stop big break set up and I’m looking to run some 20s x 10 x 15 mm all the way around do you think I have enough clearance? Do not want to make any modification ?

@paulmason1690 Жыл бұрын

Oh, what size should I go? With in order to clear the big breaks?

@me4jas 8 ай бұрын

Good Explanation. May be dumb question - My existence wheel has offset range of 35 to 45 , can I install wheel with the offset of +47 ?

@konigwheels 7 ай бұрын

You might experience some rubbing on the inner suspension components depending on what width you choose to go with. +47 will push the wheel into the car more (assuming same width), so just keep that in mind.

@me4jas 7 ай бұрын

@@konigwheels Got it. Thank you !

@lweleven3423 5 ай бұрын

Thank you well explained 👍 I was thinking 55 would do the opposite so if I want the wheel more out , less the number 👍

@konigwheels 5 ай бұрын

Correct.

@rogeliorogel8690 4 ай бұрын

Everything was going well until I saw how the lower number somehow expands more, honestly that confused me because the bigger the number the bigger separation it should be from the centerline, no?

@konigwheels 4 ай бұрын

@@rogeliorogel8690 Offset is the distance from the mounting pad to the centerline. So, the lower the offset, the lower the distance between the mounting pad and the centerline. Consider that, both width and offset determine how a wheel will sit in the fender.

@MrBill99 5 ай бұрын

It would be helpful to know what is the correct offset and whether changing it from stock is advisable. Would a change in offset affect handling for example?

@konigwheels 5 ай бұрын

Not sure I understand. There is no ONE correct offset, and people change offsets all the time when changing out your wheels to aftermarket. Offset is simply a measurement of the distance between your wheel's mounting pad and the centerline of the wheel. In terms of handling differences, with the width staying the same, any difference in handling after changing only offset would be negligible.

@JohnnyUtah9173 2 ай бұрын

If it’s not appropriate for your car or in other words, if it’s too far from the factory offset, it will fry your bearings

@_StayCommitted 9 ай бұрын

Thanks

@danihqm5730 7 ай бұрын

In your opinion, does et 25 makes the wheel too far out the fender? Or is it still acceptable

@konigwheels 7 ай бұрын

That totally depends on the car you're trying to fit and the type of fitment you're trying to achieve. It will be different for EVERY car.

@hassanchohan7178 10 күн бұрын

I have Toyota Highlander with tire size 245/55R/19 (on sticker) and Rim size 19x7.5J My question is can I use Rim size 19x8.5J and if yes, what will be the Tire size for RIM 19x8.5J ?

@bushrod6258 Жыл бұрын

My question is once you find out your offset then what is the calculation to figure out the minimum and maximum offset allowed?

@konigwheels Жыл бұрын

Check out our video of Using Math to Achieve the Perfect Fitment!

@rioraton 3 ай бұрын

So, if I understand this my car has a stock offset range of 32-36 mm. So the wheels I want to buy for it are described as Staggered Set 18x8/9 ET 31/35. So, the front wheels(18x8) with et 31 would NOT fit unless I use a spacer?? Correcttttt

@konigwheels 3 ай бұрын

That's not necessarily true. With a conservation size like that, you should be good to go, however it make affect the way the fitment looks visually.

@foobar8478 3 ай бұрын

Wait I’m confused. You showed a mustang with ET+55. Based on the clip with the ruler I would have thought going from ET+55 (further out) to a lower ET+35 would move that wheel inward and NOT outward like the animation.

@konigwheels 3 ай бұрын

No, a lower offset would move the wheel away from the car, towards the curb.

@ozcanhatice7510 Ай бұрын

For example from the factory they are giving to my car et37. Can i put for example 30 or 42

@konigwheels Ай бұрын

Depends on the car, and assuming you’re keeping the same wheel width. If you have more specifics, let us know.

@chippi3878 4 ай бұрын

Would the wheel fitment be the same if let’s say all 4 wheels have +20 offset, but the rear ones have wider wheels like 11, while the fronts are 9

@konigwheels 4 ай бұрын

No, the fitments would look totally different. Fitment is determined by width and offset so if the offset remains the same in this example, the wider wheels would stick out the car roughly 1" more than the 9" (depending on where the mounting pad sits) In your example, it IS possible to get a uniform looking fitment by having the fronts and rear vary in BOTH width AND offset. .

@jbgulfport1 8 ай бұрын

Nice music!

@bongiwepatricia1740 4 ай бұрын

Brilliant

@konigwheels 4 ай бұрын

Glad it helped!

@JWM5773 11 ай бұрын

Great video. Im thinking of getting Items 5x114.3 OFFSET 42 CENTER . Is 42 offset center safe for SUV ?

@konigwheels 11 ай бұрын

Thanks for watching! Offset isn't necessarily a safety concern, so sure ET 42 is fine. In terms of fitment however, that's a different story. What car are you running and what size wheels are you looking to go with?

@JWM5773 11 ай бұрын

@@konigwheels 17 " 2022 Ra V4

@JohnnyUtah9173 2 ай бұрын

If the offset isn’t appropriate for your vehicle, it could fry your wheel bearings

@pasiutrial 7 ай бұрын

People see ET as an issue cuz nobody really tells them the simplest thing about it- when does the wheel go out more, when you increase or decrease ET? You said that in the video but it took me 2 times to actually grasp it while the Mustang animation was shown.

@konigwheels 7 ай бұрын

It's very simple. Lower the offset, the more the wheel sticks out of the car. Offset is the distance between the mounting pad and the centerline of the wheel, which is also important to understand.

@davidt8087 2 ай бұрын

@@konigwheelshold on. You have a GERMAN name König meaning king. You even have the UMLAUT O aka Ö in the video at 2:45 on the license plate that shows Ö in the word König, but don't know how to pronounce German? So how did you come up with König as the channel name?

@TripleXRoxas13 8 ай бұрын

So the if my stock wheels are 55 offset and the new rims im getting are 45 offset; that means they will poke out more?

@konigwheels 8 ай бұрын

If the width is the exact same, then yes - it will push out 10mm more.

@JohnnyUtah9173 2 ай бұрын

It may ruin your bearings

@7UpYors 9 ай бұрын

So with the Mustang sample, its +55 offset, wheel moved outward with +35 offset....So with +15offset it will stick out even more? I have a Charger, +35 and +15 fit.

@konigwheels 9 ай бұрын

Yes. The lower the number the more it will push out.

@7UpYors 9 ай бұрын

@@konigwheels i dont know if +15 will be a good look on my Charger. Im not sure if i have +35 or +15 right now. They do sit flush with my fender though. However, im using hub centric rings now. So means i have 5x114.3(5x4.5) +35

@konigwheels 9 ай бұрын

@@7UpYors first step would be to determine the offset of your current wheels. You can find that by taking the wheel off and usually they will be stamped on the inside face somewhere. What year is your Charger?

@7UpYors 9 ай бұрын

@@konigwheels 2013 RWD HEMI

@Marcos18x Ай бұрын

So when it’s positive offset for examaple +30 the wheel will poke out more?

@konigwheels Ай бұрын

+30 offset will poke out more than +55 (of the same width).

@Marcos18x Ай бұрын

@@konigwheels I have brembo brakes and the wheels I wanted to buy were +30 that’s why I was wondering

@mikescott6097 22 күн бұрын

Nice Seiko skx!

@konigwheels 20 күн бұрын

good eye!

@parlimentjenkinsiii6658 Жыл бұрын

How do you change 0mm offset to +20mm offset?

@konigwheels Жыл бұрын

Unfortunately, you can't go MORE positive. You can go more negative by using a spacer, but more positive of an offset would put the wheel inside the car by 20mm more - which isn't possible.

@mercuriallimit 3 ай бұрын

I almost understand it until the mustang comes along. The wheel move outwards further on a +35, than +55, shouldn’t a +55 be more extruded?

@konigwheels 3 ай бұрын

This is where a lot of people tend to mess up, when it comes to the actual application on a vehicle. Lower the offset, the more it pushes out toward the road. Consider that Offset is the measurement between the Centerline of the Wheel and the Wheel's mounting pad.

@SpentSole 9 ай бұрын

Yalls should like totally make more wheels in a 18x8 wanted the ampliform but they won't fit my car.

@konigwheels 9 ай бұрын

Which car are you trying to fit?

@SpentSole 9 ай бұрын

@@konigwheels 2015 Veloster Turbo. I was gonna go bronze. A bold car needs bold wheels haha

@boostedsaab2757 10 ай бұрын

I understand what offset is and what it does and all that. What i don’t understand is all these companies just put et35 or et40 etc, No + or - just the number? Is it just assumed that it’s usually positive offset?

@konigwheels 10 ай бұрын

ET stands for the German word for offset. If you see ET40 is a +40 offset, ET-40 would be a -40 offset. Simple as that.

@boostedsaab2757 10 ай бұрын

@@konigwheels ah so ET stands for +

@konigwheels 10 ай бұрын

@@boostedsaab2757 Respectfully, no.... re-read our reply

@boostedsaab2757 10 ай бұрын

@@konigwheels right well this is what im saying, companies never state weather its an et-40 offset or a an et+40. It just says et40? 40 what? Plus or minus?

@konigwheels 10 ай бұрын

@@boostedsaab2757 If it says ET40, it's a positive offset of +40. If it says ET-40, it's a negative offset of -40...

@fredbancroft6436 5 ай бұрын

What happened to good old back spacing that's what it was when I was younger

@konigwheels 5 ай бұрын

We still use backspacing as well, but backspacing is more commonly used for trucks where you're more concerned about cleaning inbound, rather than outbound towards the cars fender.

@Gilfaizon Жыл бұрын

Still finding the opposite explanation online? “A simple way to understand offset, is the lower the offset, the more the wheel will stick out, likewise, the higher the offset, the more the wheel will tuck in”

@konigwheels Жыл бұрын

Correct. The lower the offset, the more it will stick out of the vehicle. So for example, a wheel with an ET25 will stick out of the car 10mm more than that of a ET35 (same width).

@hi7535 6 ай бұрын

It took me a sec to understand too but That is not the opposite explanation. I'm having trouble explaining it in a simpler way but, if we were looking at the wheel in this video, imagine the mounting pad being super far left from the center of the rim. That's negative offset, now try to imagine actually putting that on the car. Try to imagine a ridiculous amount of positive offset like as if the mounting pad was at the face of the wheel and imagine putting that on a car. Hope that helps.

@henloks Жыл бұрын

My bchh is Bad and Boujee

@funkyjunky6574 2 ай бұрын

How to choose your offset

@konigwheels 2 ай бұрын

Choosing your offset and width depends on what type of fitment you're looking for. We do a bunch of videos on Fitment specifically, but if you have any questions - let us know!

@therealxicojorge Ай бұрын

after your explanation I came to the conclusion there are no longer any replacemente wheels for my car I'm fucked

@therealxicojorge Ай бұрын

I'm gonna have to call enkei (they did the original spokes for it)

@konigwheels Ай бұрын

what car?

@therealxicojorge Ай бұрын

⁠⁠ hi, it’s an European Honda accord 6 (it’s a bit shorter than the Japanese and American version) from the year 2000 its wheels are 15” 6j and has an offset range of 55mm to 62mm the stock wheel being 60mm

@josephjoestar5444 2 ай бұрын

So the higher the offset the more the da of the rim gets pushed out

@konigwheels 2 ай бұрын

The opposite. The lower the offset, the more the face of the wheel get pushed outwards toward the fender or road-side.

@josephjoestar5444 2 ай бұрын

@@konigwheels I meant as in the higher positive number . Let’s say +38 vs +45 , the 38 will b more concave than the 45

@lazibuilt 4 ай бұрын

So +35 sticks out. So what about -35? It sticks out even more

@konigwheels 4 ай бұрын

Yes, assuming they are the same sizes, the -35 would poke out WAY more.

@JawnB5 10 ай бұрын

So does offset matter?

@konigwheels 9 ай бұрын

yup!

@macgrigg Жыл бұрын

Haha. He said insertion depth.

@konigwheels Жыл бұрын

haha, was waiting for someone to catch that.

@ollygunner518 Ай бұрын

Is there a right or wrong offset for a car? Im still not sure as I’m a special 😂

@konigwheels Ай бұрын

Not necessarily. Offset helps determine fitment, and fitment can sometimes be considered subjective. However, your vehicle does come with wheels and tires at a certain size from the factory. As long as you're within the recommended offset range for your vehicle, you're good to go.

@roycenorris1608 7 ай бұрын

I still don't understand why you explain it this way if you have a 8 inch rim and you have a 5/3 to me that means you got 5 in on the inside toward your shocks and the 3" inches on the outside. Why can't it be explaining that way? That's how I see it.

@konigwheels 7 ай бұрын

Because that is not an explanation of OFFSET. We're not exactly sure what you're saying... perhaps it could be your view on backspacing? Either way, a wheel's OFFSET is the measured distance between the centerline of the wheel, and the mounting pad.