koozie sewing

Рет қаралды 14,898

Nicky Adamkiewicz

6 жыл бұрын

how to sew an unsewn koozie

Пікірлер: 22

@tracylroyer Жыл бұрын

Thank you for this. I’m about to make a neoprene sleeve for a portable AC tube. This helps.

@louisesteyn8064 2 жыл бұрын

Brilliant! Thanks for sharing!

@sherrysvesnik7711 Жыл бұрын

Can you tell me where I can buy fabrics like this. I must not know what "term" to search for. I want cute patterns etc. Thank you for the sewing tips, if I can get some fabric I will use them!!👍

@HypoZhang Жыл бұрын

hello, I have, I'm a professional in this material!🎉

@jenniferadams4790 Жыл бұрын

Where can I get the printed neoprene? I can only find solid colours Thanks

@adelaidanilo3362 Жыл бұрын

I think she sublimated the koozie. You buy blank koozies and you sublimate the image on it.

@HypoZhang Жыл бұрын

I have a lot here! No color limitation, heat sublimation before sewing🎉

@pithvinegar8975 Жыл бұрын

A few questions… Do you know the thickness of your neoprene? (4mm? 3mm?) What type of needle did you use?

@HypoZhang Жыл бұрын

5mm Hem sewing needle

@jessicagorey5066 4 жыл бұрын

Are you sewing off the side of the fabric? I may not be asking this correctly? Is the right side of the zig zag not into the fabric?

@jimmyeng663 3 жыл бұрын

Yes, that's how you'd do it. This way when you stretch the seam so it butts up against each other it will align side by side and not have a turned seam.

@hayleyrwilson 6 жыл бұрын

Hey, Did you print your design with a sublimation printer?

@theAtoZhouse 6 жыл бұрын

Hayley Wilson yes i did

@redfishbum Жыл бұрын

Thank you

@stephanieb.457 2 жыл бұрын

Can anyone tell me where to get this fabric covered neoprene to make the koozies and coffee sleeves??

@HypoZhang Жыл бұрын

hello, I have, I'm a professional in this material!

@area51bandas 4 жыл бұрын

where can i get this mold to cut the neoprene? in PDF Format?

@chazcov08 4 жыл бұрын

She bought it already sewn and took the stitches out to sublimate it.

@jimmyeng663 3 жыл бұрын

Measure a cans circumference and diameter to get the dimensions. Draw a circle (base) with the diameter measurement then on opposing sides of the circle draw long rectangles the height of the can and half the circumference of the can. Test this pattern on cardboard and tape the sides and put a can in to see if it works. If it does then cut it out of neoprene and sew.

@HypoZhang Жыл бұрын

I can send you a model