Hanbon $200 Katana Review and Destruction (Full Version)
Рет қаралды 18,432
2 жыл бұрынIn this video I do a review of the sword and abuse it to the point of failure.
Some general notes that did not make it into the review.
The sword's weight is not dissimilar to an iaito, it is rather light and feels great in the hand. The higher point of balance is offset but the overall weight of the blade gives this one a nimble feeling while having some presence in the cut.
The sori is also a little deeper than average, it was not challenging to do iaido with the sword. I hardly noticed it until I measured it. It has a pleasant look to it too, in swords of this size with a full 1” sori the feeling is much more pronounced.
Some notes that are in the video
The sword has a pleasant appearance and feeling for the money. I think it excels as a tool to practice even though the tsuba was a little harsh on the hands. In terms of durability it held up to all the abuse quite well but broke in a way that I would consider premature on the croquet stake of doom. The handle held up through use and testing giving me the impression that it gets passing grades but did not wow me. That said, durability for the zombie apocalypse is not where this one shines, it is a comfortable tool with a nice set of features and fittings. If you were looking for a budget blade to train with, then this one is worthy of consideration. If you want something nimble and don’t mind sharpening the blade yourself, then this is worthy of consideration. If you are looking for ultimate durability on a budget, then I would recommend looking elsewhere.
Link to Hanbon - www.hanbonforge.com
You can find more information about the sword here.
www.hanbonforge.com/fully-han...
Handle/Tsuka Length: 11”
Blade/Nagasa Length: 27.5” (without habaki)
Sori: .87”
Moto-haba: 1.21”
Saki-haba: .87”
Motokasane: .26”
Sakikasane: .197”
Weight: 2lb .06oz
POB: 6.5” from tsuba
MSRP: $200
Link to the Facebook spot - / matthewjensenswordreview
Link to the Twitch spot - / sword_friend_matt
Link to the Patreon spot - / krunan
Link to the TicTock spot - / matthewjensenswordguy
Link to the Instagram spot - / matthewjensenswordguy
Link to the KZfaq Membership spot - / @matthew_jensen
Link to my eBay sales page - www.ebay.com/usr/krunangree
@iztatr8951 2 жыл бұрын
I have 2 from hanbon and were custom length for my ryuha, for the money I easily can say I recommend them. They work well for kata and even with the extra length were worth more than what I payed.
@evasiveskater7931 2 жыл бұрын
Easily i could comfortably buy one from these people. Nice review and thanks again sword friend for the detailed and well thought out advice. 🌪️🌊🛡️😎🗡️
@chrisfields8077 2 жыл бұрын
The edge holding capability and when it snapped tells me they're doing a higher hardness on this monosteel than is typically done. They are probably doing it mainly for the edge holding and retention quality that many Japanese swordsmanship users prefer over a "tougher" less hard blade.
@Matthew_Jensen 2 жыл бұрын
Did the grain look large to you?
@chrisfields8077 2 жыл бұрын
@@Matthew_Jensen not too large but yeah. That's common with a slightly higher hardness if they are only doing a quench and temper
@jameswice195 Жыл бұрын
As far as Japanese swordsmanship I've never had a formal lesson I just love swords and back yard cutting. That being said I've been looking for affordable offerings to practice with. The most expensive katana i own is a cold steel but it handles like a crowbar compared to my way cheaper shinwa. So its great that you put them through their paces so we see exactly what we would be buying. Thank you.
@peppironee4736 3 ай бұрын
Get formal training you lame
@itchiyann 2 жыл бұрын
Nice video ! Thanks you for this test and really complete review ;)
@KF1 2 жыл бұрын
Good review. I like that tsuba as well. Soft shinogi-ji would make for a smooth bottle cutter. Nice
@robbwebster145 2 жыл бұрын
I find most tsuba are rough on the hands. Causing rub and blistering, which is why Samurai and Shinobi wore Tekko. I don't think I've ever handled a katana which wasn't a bit rough on the hands. Great review.
@strydyrhellzrydyr1345 2 жыл бұрын
I really like it... This is the price range I can do.. hope they are still available
@alanwright782 2 жыл бұрын
What’s your thoughts on the Hanbon GYAKU-KOBUSE option? I hope I made a good choice getting the upgraded blade.
@ThallFather Жыл бұрын
I'm looking into getting an unsharpened katana for Iaido. Would this company be fine for that?
@T-DsGaming 2 жыл бұрын
It was hardened enough to not bend which caused it to break easier. Some would say this is good and some would say it's bad.
@lune7532 2 жыл бұрын
I am here coz right now I am in the processes of communicating with HanBon about a possible customized order 😁
@JoeSteel1 2 жыл бұрын
Fantastic review Mat, extremely thorough, well thought out and extremely well done....impressed at what you got from them for 200.00 price....what steel was the blade made of...dont remember if you mentioned it
@Matthew_Jensen 2 жыл бұрын
Advertised as 1095
@FredCheckers Жыл бұрын
The copper habaki is more authentic but the damage is part of why modern ones favor brass.
@pauly51 2 жыл бұрын
Do jo ronin costs more, but very nice. What total weight of a katana do you prefer?
@Matthew_Jensen 2 жыл бұрын
Depends on the context. Iaido, I prefer light under 2lb, 2.5lb if it is longer. Cutting Tatami, I prefer some closer to 3-3.5lb (probably) but it still depends.
@laksivrak2203 Жыл бұрын
What steel is it? HanBon offers different types
@aidencrawford113 2 жыл бұрын
Hi Matt, Looking to buy one of hanbon forge for 150 USD, any suggestions and how long did the sword take to ship? Thanks!
@Matthew_Jensen 2 жыл бұрын
I zone out on that stuff a bit. I want to say it was pretty quick but I got it before the supply chain was completely on fire. I think most of these go ocean freight and I would speculate there are a lot of swords suck in the LA harbor at the moment.
@diogstavdiogstav3920 2 жыл бұрын
Hello. As a practioner you are and with a lot of experience in a large variaty of swords that you have, what is your opinion/preferrence about bohi (in a functional term, not aesthetically)?
@Matthew_Jensen 2 жыл бұрын
I don't find swords with bohi are more or less ridged, and they are not always lighter. At least in my experience with Chinese made katana. Bohi (apart from the aesthetics) tend to be louder in the swishing sound they make. That can be helpful with practice. I don't think they aid in cutting or thrusting, likewise I have not found them to hinder unless really poorly made. In theory their maybe something they do to enhance the structure or reduce weight but I don't find that to be the case, specifically in smashing Chinese made katana in my backyard.
@diogstavdiogstav3920 2 жыл бұрын
@@Matthew_Jensen Thank you for your ansewr.
@jonathanhalko745 2 жыл бұрын
Hello do you know if swords of north shire are better quality, then Hanbon swords Both of the sword companies use Long Quan China. The swords on Hanbon are cheaper 30% to 50% around. does swords north shire just mark up the price for the same thing ?
@nw649 Жыл бұрын
They are a reseller of ryansword who uses deceitful practice, should only buy from hanbon or huawei for longquan.
@blacklce87 10 ай бұрын
what do you use for sharpening your katana? Electric sharpener? Whetstone? Have you used the AccuSharp Knife & Tool Sharpener?
@watchreport 8 күн бұрын
He legit tells you what he used in the video. 20:07
@2KDUDE22 2 жыл бұрын
Good review again. Is the Ronin Katana dojo pro sword $300 range really as durable as advertised?
@Matthew_Jensen 2 жыл бұрын
They seem to be.
@unafflictedgaming 2 жыл бұрын
He has tested them before. I have one myself haven't done any abusive testing but it seems built like a tank.
@KF1 2 жыл бұрын
Tsuka disability, but strong blades. Have one of their 1045 line. It's tough stuff
@Eternaldaone 11 ай бұрын
@@KF1would you prefer their 1045 clay tempered steel over Han bon 1060?
@mattsimon2292 2 жыл бұрын
would be nice to see a review on hero swords .... imperticular 1095 clay tempered. . nice clip thou....
@TONEDEAFSOUND 9 ай бұрын
i have a hero sword with that and i fucking love it
@mattsimon2292 8 ай бұрын
Do you know much about them... i hav 2 ...1095 clay tempered...
@TONEDEAFSOUND 8 ай бұрын
@@mattsimon2292 yeah i do hero sword is really nice because they don’t lie they have a really clear description on their website that tells you what your getting. the handle on mine is very tightly wrapped and the blade itself is extremely nimble and sharp out of the box. i have a showcase up on my channel right now if you wanna check it out. it’s called hero sword review
@TONEDEAFSOUND 8 ай бұрын
kzfaq.info/get/bejne/eq2bmZynrbzGk30.htmlsi=11jCiZLW5lGjmv6K
@erichusayn 2 жыл бұрын
Not bad for $200.
@oubliette862 10 ай бұрын
Is there any significance to having a wedding band on both hands?
@Matthew_Jensen 10 ай бұрын
In my wife's native land the wedding band is worn on the right and in the US it is on the left. I usually have both of them on but the band does not fit my right hand anymore. I keep them on both (when I can) for her.
@satinsteeldad 4 ай бұрын
Copper softer than brass because it takes tin and Copper to make brass
@GynxGrimmMusik Жыл бұрын
Just my opinion. One who buys and uses tools, should know how to maintain those tools. Anyone can be a buyer or a user. Be more, self educate!
@user-lw8th8jt9z 8 ай бұрын
I wish I could show you how to do a solid review.
@Matthew_Jensen 8 ай бұрын
I would welcome the advice. What do you recommend?
@riaandewinnaar5040 2 жыл бұрын
We are obviously going to have to fund a master forged Japanese Katana to destroy for comparison.
@Matthew_Jensen 2 жыл бұрын
Breaking swords is fun but the nicer they are the worse I feel about it. Don't get me wrong, I would do it if someone sent me a fancy sword specifically to break it but I would also feel bad about it.
@riaandewinnaar5040 2 жыл бұрын
My dad always said "be smart, learn from my mistakes". Saving the rest of us money there. Still a few to watch through but differently hardened T10 or through hardened 1060 seems good choices.
@michaelrs8010 2 жыл бұрын
I invite everybody to come join the katana fun over at r/katanas Reddit. Okay, maybe not all that fun. Like any forum therexare fools and scholars and the "action" is a little slow at times, but every now and then there's some interesting posts. Also, if you go to the Hanbon Forge Facebook page and check the POSTS section for February 16th '22, you'll see my latest sword from them. At least the latest one, of 7, as of this post
@sexy4ssninja 2 жыл бұрын
Video needs more swearing
@kevinbreese5739 2 жыл бұрын
That is not the way of the Ninja.
@peppironee4736 3 ай бұрын
That form is 💩💩💩🤣
Let's ask Shogo | Your Japanese friend in Kyoto
Рет қаралды 241 М.