Trim to fit 33 inch tires on your Chevy zr2 | AEV | How to

Trim to fit 33 inch tires on your Chevy zr2 | AEV | How to | Chevy colorado zr2

Рет қаралды 8,235

3 жыл бұрын

Not sure if this is completely necessary just to fit the wheels/tires, when you're lifted. But definitely needed for offroading when going larger tires, and wheels with a lower offset than stock.
follow me on instagram: @kryptonnyc
Thank you for the support!
Need parts for your car?
Enjuku Racing has you covered - use my link below:
enjukuracing.com/#_l_3x9
Rear Bash bars? use "chrisdz" at checkout for 10% off
www.truefocusfab.com/
Music :
/ julian_avila

Пікірлер: 24

@mattknowski1615 Жыл бұрын

I just did this trim right now following your step by step, thanks for the video! Best one I've watched I think

@chrisdz Жыл бұрын

Awesome! Thank you!

@matthewhorton3164 3 жыл бұрын

These videos are so awesome.

@mattandrickadventures8416 3 жыл бұрын

Great video but a very tedious/ difficult kit; when I installed my kit I was frustrated and pulling my hair out. I found the rear to be more challenging.

@koalafan1576 2 ай бұрын

Can you post a link to that kit/instructions? I’m hoping I could find one for my 2016 Z71.

@saikyouabe 3 жыл бұрын

Great video, how long did it actually end up taking you?

@chrisdz 3 жыл бұрын

i wanna say it was about 3hrs for just the fronts, but some of that time was also filming and talking to the camera

@madcratebuilder 3 жыл бұрын

You well pop the flares off the rear if you off road much. I thought the install was pretty easy, just time consuming.

@chrisdz 3 жыл бұрын

yeah, my thoughts exactly

@justinibarra2415 2 жыл бұрын

I know the upload is a while back but where did you find a kit like this?

@chrisdz 2 жыл бұрын

amzn.to/3v6Kybs sorry for the late reply.

@brandonyanke9047 2 жыл бұрын

Did you put the 33" tires on stock wheels? Did you need wheel spacer?

@chrisdz 2 жыл бұрын

at the time of recording this video, no.. i was on stock wheels and tires. I had a new setup on the way, so i cut the fenders ahead of time. you shouldnt need spacers on stock wheels, you actually might not even need to trim on stock wheels with 33" tires, if you're lifted/leveled

@bryanparadise4030 Жыл бұрын

That kit took me quite awhile. The front looks good, but the “close out” panel on the real does not sit flush with the flare and it looks kind of trashy. When my 33s run out of life I’m upgrading to 35s and the highmark flares.

@chrisdz Жыл бұрын

for me it took me a while to figure out the templates.. i wanted to make sure i didnt cut it wrong, even had my wife come and double check me before i did anything 😂 .. i didnt bother doing the rear because i dont do heavy offroading and am not worried about the rear flares as much. im also considering doing 35s when these 33s wear out.. but i dont want to do high marks

@scotw67 Жыл бұрын

@@chrisdz if you go with 35s and no Highmarks, would you just cut the panels? I’ve seen some that have cut along the fender line and it looks good.

@chrisdz Жыл бұрын

@@scotw67 I like the look of the fenders trimmed over the high marks.. but you have to make sure you do it’s neat enough since nothing is gonna cover up any wavy cuts

@scotw67 Жыл бұрын

@@chrisdz true. The ones I’ve seen have used a U shaped edging to cover the cut edge. At some point I’d like to do the Highmarks, but not sure if I’d want to tackle it myself. Great channel & I’ve learned a lot from your videos. Well done, sir!

@chrisdz Жыл бұрын

@@scotw67 🤘🏼 thanks man. Appreciate it

@JoeyBeeFit 3 жыл бұрын

All I've ever wanted in life is your type of height, your type of truck and your type of house. How about we trade lives for a weekend? 😀👍

@1800chriswoods 2 жыл бұрын

Install starts at 4:42 🤦🏻‍♂️

@Jiff_af 3 жыл бұрын

I think you think it's annoying cuz you burned yourself lol. Looked pretty easy to me 🤔. Next time throw your purse at it, maybe it'll turn into a toyota.