KTM 790 890 ADV R | Rottweiler Air Intake Install

No video

KTM 790 890 ADV R | Rottweiler Air Intake Install | Back in the Garage

Рет қаралды 26,684

Күн бұрын

In this episode of Back in the Garage, I install a Rottweiler Air Intake on my 2021 KTM 890 ADV R. In addition to some added power gains, it converts the air filtration from a paper filter to a reusable foam air filter. The parts I used are linked below.
Rottweiler Pro Edition Intake www.rottweiler...
(mentioned) Rottweiler Rally Edition Intake www.rottweiler...
Buying from Rockymountain ATV/MC helps support the channel! www.rockymount...
Check out my books and other great stuff in my Amazon store! www.amazon.com...
Want signed copies of my books? 2wheeledrider.c...
2 Wheeled Rider T-Shirts and Swag teespring.com/s...
Check out Epidemic Sound to up your video production www.epidemicso...
www.2wheeledrid...
Follow Me!
/ marioorsini
/ 2wheeledrider
/ official2wr
Wanna send me stuff? Use the address below.
Mario Orsini
PO Box 64
Bunker Hill, WV 25413
*Some links are affiliate links

Пікірлер: 54

@obrianmcc12 2 ай бұрын

I'd be shocked if you noticed in gain in power, but kudos to Rottweiler for bringing products to market that will prevent you from dusting your motor!

@2WR 2 ай бұрын

You’d be shocked then.

@Hoshi_Toranaga 2 жыл бұрын

Awesome, really would love your review on it and if it is worth it compared to the standard.

@simonkresser6095 2 жыл бұрын

kzfaq.info/get/bejne/ZuBnrbB1zcyXmGw.html Pirate Racing From Germany did a complete review with test runs. ;)

@M5tworude 5 ай бұрын

Do you think this is a better option than a Rottweiler Power Plate? Is it louder?

@dandersonjr 2 жыл бұрын

Wow that seemed like a lot of work. Last time I did an air box modification it was on my 2001 WR 426 and all I did was take the seat off and drill a couple holes in it. Times have changed.

@2WR 2 жыл бұрын

Lol reminds me of modding the airbox on my DRZ400 airbox with a hole saw.

@pinkiewerewolf 5 ай бұрын

You really do good work on these instructional videos. I'm looking to change out the stock filter system on my 22' 890.

@2WR 5 ай бұрын

Thanks 👍

@sanjosejeff Жыл бұрын

Thx for the video. I ordered a 23 890. Can’t wait. This will be one of the first things I do as I run same on the 350. I didn’t see a screw on cover to remove foam when washing on Rottweiler website. Suppose I could always make my own with some hard plastics and a rubber seal. I doubt it’s as much an issue as my constantly filthy muddy dirt bike but I don’t know. I plan on punishing it pretty good. Otherwise I’d buy a Transalp😂😂

@BraaapoholicBob 2 жыл бұрын

Love your videos… I do not own an 890 R yet but I am in the hunt. I have a 2020 EXC-F and it’s a fun bike but it’s not really a true dual sport adventure bike. I consider it to be 97% dirt. Don’t get me wrong it’s fine but I want a bike that I can go places on and this one is just lemonade. Looking to sell it and pick up an 890.

@scottc3 5 ай бұрын

Great video! Very helpful. Also spotted the “KTM Orange” Crocs garage footwear! 😂

@2WR 5 ай бұрын

😂😂

@GregG_88 11 ай бұрын

What a pain in the ass process to get to the filter lol.

@progammler 2 ай бұрын

Why not use the original Ktm foam filter insert? I've been using it since 2019 without any issues.

@M5tworude 5 ай бұрын

The mixture is already lean of the stoichiometric mixture (optimal mixture resulting in maximum horsepower) so adding more air makes it even more lean and thus, less horsepower and even more heat. Or does the ECM compensate? I don't think so.

@BraaapoholicBob Жыл бұрын

Hey there, so I did buy the 890...love it...made a bunch of upgrades...looking at doing this air intake...are you satisfied with it? Did it make a distinctive difference in power? Sound? Etc?

@2WR Жыл бұрын

kzfaq.info/get/bejne/l5xnkpNe167Dm6M.html

@BraaapoholicBob Жыл бұрын

@@2WR thanks Mario I appreciate it!

@lynnkanable7023 2 жыл бұрын

Where is the world did you learn to do all that? Was it really worth all that effort?

@2WR 2 жыл бұрын

Been working on bikes for a long time now, the more I work on them the more I learn. I think it was totally worth the effort.

@jonay9221 Жыл бұрын

Hi, what is the hp gain please?

@frankcastronovo 5 ай бұрын

yo thanks for your content - so helpful. just got a ktm after going on a tour on one in new zealand. now building out the necessary tools to do my own maintenance. Few Q's What Torque range in Nm's is speced out for the 890/Can i use one torque wrench that will covers that whole range? What brand do you recomend and do you have a list specific tools for KTM's 890? tks fank

@2WR 5 ай бұрын

Nearly impossible to find a torque wrench that will work on the entire range. I use a 1/4 inch KTM branded torque wrench for the smaller fasteners and a 3/8” Snap On for the larger fasteners.

@osimnod Жыл бұрын

Nice detailed review of the disassembly and reassembly. Question: you removed the snorkels so the intake air simply flows into the air box through the side panels instead?

@2WR Жыл бұрын

Went from a sealed air box to open so takes on air from the entire open area now.

@osimnod Жыл бұрын

@@2WR So from wheezing to breezing!

@ydocsaee421 Жыл бұрын

Very nice video. Thanks man! Looking to do this job in the next few days. What grease did you use to seal the filter to the housing? Just all purpose grease? Thanks again.

@2WR Жыл бұрын

Any waterproof grease. I normally have Maxima brand on the shelf.

@danielkumada6434 Жыл бұрын

Hey! Thanks for all the vids and beta!! I installed that airbox in mid 2021 (best upgrade to the bike to date) and have been thinking about adding the arrow cat delete. Have you had any issues running both? I've received both yay's and nay's and appreciate your input. I'm concerned I'll have to flash or remap this thing...thanks!

@2WR Жыл бұрын

No issues. I’ve installed this setup (airbox/cat delete) on a handful of 890/901s now with no problems. Obviously if u want max gains, you’ll want to remap but won’t have any issues if u don’t.

@houjous5131 Жыл бұрын

Have you had any issues with the airbox? I've heard it hasn't been great offroad. What was your experience

@2WR Жыл бұрын

Been great. Dunno where u heard that but a foam/oil treated filter is far better for off-road than a paper filter. Multiple of us have been using them on rides with no issues other than more routine maintenance.

@fabienpics Жыл бұрын

Very good video job .. 🥇🥇🥇🥇🥇🥇

@johnadams3038 Жыл бұрын

Are the power gains even noticeable?

@CBechaz Жыл бұрын

Any sort of long term review on that. Dino testing or horsepower gain numbers?

@2WR Жыл бұрын

You can find the dyno numbers on Rottweiler's website.

@NMS.SuperDuper 6 ай бұрын

I assume this same filter kit fits the Norden 901 as well?

@2WR 6 ай бұрын

Yep. Just a slight mod on the air box install.

@sreeinfo03 11 ай бұрын

How often do you think the filters should be replaced ?

@2WR 11 ай бұрын

As long as they’re still in good condition, just keep reusing them.

@marcochavane3124 Жыл бұрын

Is the Norden you reviewed getting one of these?

@2WR Жыл бұрын

Had one put in around the same time.

@endurojitsu3804 2 жыл бұрын

Now: How to install Rapid Bike Evo 😂 Thanks for making these videos - I’ve installed Arrow Decat few days ago by following your instructions.

@2WR 2 жыл бұрын

Don't hold your breath waiting for that video.

@hh6a431 8 ай бұрын

Is it much louder than stock?

@2WR 8 ай бұрын

Very little and not when you’re in the throttle. The cat delete added way more db than the intake

@garzktm Жыл бұрын

Is remapping necessary?

@2WR Жыл бұрын

@lateroenmotado9886 Жыл бұрын

Is better to adquire a k&n and cut the original box

@2WR Жыл бұрын

No. Why do a hack job on such a nice bike? I’d never run a k&n air filter in one of my bikes.

@eriknash8783 Жыл бұрын

@@2WR Agreed, but after seeing all the drama surrounding the foam filter that was originally spec'd for these RP air boxes and passing dust into the intake, I'm seriously pausing on ordering. I realize the new triple stage filter is supposed to protect against the dust passing issue, I have serious trust issues with RP. They refuse to admit they made a mistake (for legal reasons, I'm sure) and that's not going to gain trust of the community.

@davidforeman2734 Жыл бұрын

Those small bolts with nuts on them are they on the inside of the air box if so if those nuts come off they will go straight into the engine not good. Maybe put some lock tight on them.

@M5tworude 5 ай бұрын

Love the content but I cringe at the incessant "back in the garage today" Might just be me but I know that you can do better.