Wow, thanks for showing the TB adjustments. I’ve been having throttle issues and i had no idea what to do with the TB adjustments until now. Thanks for the vid!

Very informative… thank you 👍🏼

Hey man. Great vid. Thank you

Great Vid👏 I'm putting a new TB in soon and now I know to go with the Acuity Tps sensor.

Great info. 🔥

Thanks for your knowledge bro

Good shit bro 👌🏾

Wassup bro been awhile... finally finished my EPS conversion way back and still running great. Btw acuity is awesome I bought their first gen and worked for awhile then idle values kept changing causing some bucking from dig. But I called them up they we’re happy to help out and send me a new one but they wanted the old one to do some R&D. Glad to see the improved it. That TPS gasket is not used anymore cuz of the new o-ring that was included. I’ve tried all the TPS you can think of even ktuneds hall affect took a dump on me and cost a grip. Keep it up D!

Straight to the point, love this video. I hate it when people do a 6-10min blog intro, make that shit an outro, show me the build first! Lol

Thanks for the video got some issues with bucking and Rev hang and a tiny bit of high idle tuner told me to check out the throttle body and cable this video really helps in understanding what to look at

So good cheers

Wassup Bro? Long time no see. I’ve tried every TPS sensor from K-Tuned even their Hall Effect version. The main reason the TPS goes out is when it rest on idle and changes the set value for closed position from Vibration. (Remember when ktuned used “RTV” to help reduced it) It’s from vibration and wearing out from the throttle body shaft holding the plastic holder inside the TPS. My K-tuned Hall effect version kept changing closed values even with a slight preload to keep the spring snugged. I now use Acuity when they first came out. It lasted about a year then started to change values as well but they hooked me up with another TPS and wanted my old one so they can improve their design to fix this problem.

Running a tsx IM and TB going to try the stock TB with it hoping for a tad more response and low end. 2007 accord 2.4

Please give me detailed of where to order the Acuity TPS I try to change mine as well

🔥🔥🔥👍👍👍😭😭😭 Fire! Great instructional video! I'm so happy to see you posting.... I'm crying!😭 #krewfam

How do you like the ktuned tb? I need a tb for my swap and thinking about buying the dual pattern 70mm for my kswap. Thanks

What could be the problem with my Honda Edix 2005 CBA-BE1 engine when I step on the accelerator pedal, the response from the engine is not good, it struggles to pick up from the drive gear unless i put the gear in 1. Also when the engine starts, it emits black smoke like there's no proper mixing of air and petrol in the chamber. I changed the sensor below the throttle body but nothing has changed

Would it be fine if I run the iacv with both coolant ports blocked off like you did ?

Hey man I have a tsx what do I need?

I don't think the non adjustable one has that sticking issue i could be wrong tho.

does it have a map port

Hey bro you did you have the stock IM or did you go rbc or another aftermarket for your ktuned throttlebody?

Did you get any bogging while driving at 2000 rpm? If I lightly give the car gas it will bog and the rpm’s will fly up and drop back down. Doesn’t do it at all when I give it a little more gas

What about the sensor you didn’t touch on the stock throttle body?? What sensor is that??? I broke it so I’m trying to look for it

Did you hook up the cruise control? I’m getting ready to install mine and there’s only on cable spot? Am I missing something?

👍🏽👍🏽👍🏽

Do you you need to adjust the idle screw if you delete the iacv

Sell me your old one lol I need one

where is the part of idel adjustment??? 👎