K series custom throttle body bracket

Рет қаралды 3,884

Жыл бұрын

music from epidemic sound
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
check my playlists for building my k24 and my playlist for other videos on this CRX
15 min K series build
• k24 build in 15 minutes
If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !
#k24 #k20 #k24build #4piston #dragcartel

Пікірлер: 41

@justj2729 Жыл бұрын

Starts with worlds longest chain of ratchet extensions put together for a bolt - check! This should be a good one ;-)

@themechanic6117 Жыл бұрын

🤣👍

@HUBBABUBBADOOPYDOOP Жыл бұрын

Damn, I about fell off my chair when your video appeared in my feed! What's goin on? So nice to see you, hope you & Family are warm and safe! Thanks for the video. (Don't forget about me, because I'm not Rich Folk like you, 2 stall garage, I'm at the mercy of Mother Nature, for working on my car- and it's 36F & windy all month, so I'm INSIDE till then!🥶 But ASAP I'll be wrenchin!) Take care, Jonathan👨🏾‍🔧

@themechanic6117 Жыл бұрын

We're all well, lol yeah things have been slow but I'm trying. There's no rush, wait till it gets nicer out. That's part of the reason why I'm not in the garage that often. It's too cold

@NovoGold Жыл бұрын

Just thinking about your vids last night... and BOOM, that's some freaky shit, anyway good to see you back... all the best from Newcastle, Australia 🇦🇺👍

@themechanic6117 Жыл бұрын

Hello! Lol that seems like perfect timing to me! Thanks for watching 👍

@oreally8605 Жыл бұрын

That is the cleanest Throttle body I've seen in awhile.. It's really nice to have your own tools, drills and all. Pre fab stuff. Thumbs 👍 up..

@themechanic6117 Жыл бұрын

Thank you, having the tools is half the battle! 👍

@oldskool1979 Жыл бұрын

Good stuff broo !

@themechanic6117 Жыл бұрын

Thank you! I'm happy with the outcome

@125sm3 Жыл бұрын

That's one sweet set up. It's never straight forward when doing custom work to cars or motorcycles. I am currently restoring a motorcycle and it's 1 obstacle after another lol. Great job 👌

@themechanic6117 Жыл бұрын

You already know! Even "bolt on" parts are never just bolt on lol

@HUBBABUBBADOOPYDOOP Жыл бұрын

Thread a small washer of same cable I.D. onto cable. Gently push a brad through the cable end, head of brad holding washer. Dip it in a carved wooden cup of molten lead (old battery terminal). Trim excess. Beware of lead vapors. Swedging is a cool science (it's what you cut off).

@themechanic6117 Жыл бұрын

I was thinking of doing something like that but I didn't know how to go about it

@HUBBABUBBADOOPYDOOP Жыл бұрын

@@themechanic6117 Get a chunk of 2x4, drill a small hole of whatever diameter swedge you need, End of cable, push a bent finishing nail up through the end of the cable. Heat an old battery terminal or fishing weights, pour into hole, dip cable in, till cool maybe 10 minutes. Drill a 1/4" hole 1/4" deep.

@themechanic6117 Жыл бұрын

Thank you, I'd be interested in trying that one day

@pauleggert1863 Жыл бұрын

Hey just some advice for safety. I'd put an L bracket close enough to the the v pulley so it's not possible the throttle cable comes out/off of the pulley.

@themechanic6117 Жыл бұрын

I figured the spring tension of the throttle body should keep it always on the v pulley ,but that's not a bad idea .

@pauleggert1863 Жыл бұрын

@@themechanic6117 better safe than sorry you don't want to lose acceleration ability at the wrong moment.

@themechanic6117 Жыл бұрын

Definitely

@mcef9117 Жыл бұрын

Man.that came out beautiful! Nice Job bro 👏

@themechanic6117 Жыл бұрын

Thank you 💪

@MrEligamer Жыл бұрын

you need to make this a kit bro

@themechanic6117 Жыл бұрын

I'm going to make like 5 of them. If they sell then great 👍

@SteveRobReviews Жыл бұрын

Nice one bud , thinking outside the box x10👍

@themechanic6117 Жыл бұрын

Thanks Steve! Universal parts suck! Lol

@BruceLyeg Жыл бұрын

Nice job on the 45 bend in the throttle cable. I thought I was watching a different video there for a second, creampie? 😂

@themechanic6117 Жыл бұрын

Sometimes things go a little off track lol

@stephenjackson4970 7 ай бұрын

What you gonna do with the old bracket mine broke and can’t find a replacement 😅

@dp5383 Жыл бұрын

Nice work! I noticed the snow falling... did you ever service your snow blower carb? 😏

@themechanic6117 Жыл бұрын

I still haven't gotten around to that, it's turning into one of those " I'll do it next year" things ....

@JoseContreras-mv5yz Жыл бұрын

Extensions😂😂😂

@themechanic6117 Жыл бұрын

For hard to reach places 🤣

@JoseContreras-mv5yz Жыл бұрын

@@themechanic6117 that rear mount😂

@themechanic6117 Жыл бұрын

Definitely lol

@skrimper Жыл бұрын

What a coincidence. Got my tax money and was just thinking about spending a chunk to upgrade my 96 d16y18 and was wondering what to do. Was thinking a Ram intake, bigger throttle body and manifold, new headers and a 2.25 inch exhaust maybe. Any suggestions? I kind of feel like I should just swap it

@themechanic6117 Жыл бұрын

A swap is your best bang for your buck. Unless you want to go turbo. Spending a good chunk of money on bolt ons won't gain much HP