Kubota BX Fuel Filter Replacement

Рет қаралды 22,355

Күн бұрын

Replacing fuel filters on a Kubota BX1850 tractor, this also applies to other models in the BX line up. There are two fuel filters, one located at the rear underneath the tractor, and another up front in the engine compartment. The rear filter is a little tough getting to, but this is a very easy do it yourself project. If you have a mower deck mounted, you will need to remove it to get to the filter.
I was having some low idle and sputtering issues, which is usually a result of dirty fuel filters or possible fuel gelling.
These are the tools I used:
10MM Socket Wrench (Filter Brackets)
14MM and 10MM wrench (Fuel Air Bleed)
Hose Pinch Pliers (to keep fuel from spilling)
Pliers (Hose Spring Clamp Removal)
Hose Pliers (Removing Fuel Hose from Filters)
Catch Pan (to catch diesel fuel when removing filters)
Zip Ties
****************************************************************************
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and I will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Пікірлер: 27

@philipschillaci168 7 ай бұрын

Much appreciated. One thing I can suggest is keep your line crimper on the rear while you’re changed both filters. I also ran some fuel oil through the system when I release the clamp through the front filter so there’s less to bleed. I appreciate the update. Thank you for the video.

@johndodge2124 2 ай бұрын

Thank you so much for posting this!

@resovoirdog100 2 жыл бұрын

Very detailed video. Great job with the lighting, video and explanation. Most of the videos I've seen on replacing the BX fuel filters didn't even use a light. I'm not very mechanically inclined but this video was thorough enough that I think I can do it as I play and pause this video through out the process. Thanks!

@mw3designs 2 жыл бұрын

Thank you! Glad I could help!

@blackdogbyte3358 10 ай бұрын

This is by far the best maintenance video that I’ve seen on KZfaq to date. Great step by step videography and detailed commentary. No bla bla bla like on so many others.

@mw3designs 10 ай бұрын

Thanks for watching, and your comment! I try to keep it simple!

@robertcabral9015 10 ай бұрын

Best videos so far that I found explaining filter replacement

@aloha2016 Жыл бұрын

I have a GR2120 (diesel) which has started to sputter from time to time. We believe it has something to do with fuel (may be the line or the filters or fuel) as other reasons have been ruled out. Your video with the tool usage is very helpful and will save me a ton of time. Thank you very much for doing such a great job and sharing it!!!

@benjaminshipton2271 7 ай бұрын

Excellent overall job! Do more Kabota maintenance videos. This was done very well, thanks!

@bdaohio 4 ай бұрын

Great video! I used this to change the fuel filter on my GR2120. I did not know about bleeding the line. Thank you!

@blackdogbyte3358 10 ай бұрын

After viewing this video, I attempted to replace the filters on my BX23s. I quickly came to the conclusion that Kubota could not have located “underneath” filter in a more jeezless location to work on. To make things worse, there was another hose that ran parallel to the fuel line that was wrapped around the fuel line which I had to disconnect and reroute. The space to work in is minimal so the tools used here are essential I didn’t have all of the speciality tools that were used in this video, but I am shopping for them now and hope to have them the next time I have to change the filters. They are the right tools to make this job as painless as possible.

@TheMabbasi 19 күн бұрын

Great Video

@myname7914 Жыл бұрын

After you bled the fuel line... I still saw some air in the fuel filter. Is that normal? Thank you for the video.

@user-zw7sl9ou6q Жыл бұрын

Take a fine point sharpie write the hours on them fuel filters then you'll know

@mw3designs Жыл бұрын

I do that with oil filters, that way I don't forget.

@gregpino5146 10 ай бұрын

How do you get all the air out of the line. I’ve tried turning the key on and letting the fuel Pump run as I read on another site but the filter at the motor still has an air bubble that once the motor warms vapor locks the injectors

@aloha2016 Жыл бұрын

Can you please provide links to pinch pliers, hose pliers and separator pliers? Thanks.

@tedsmith3532 2 жыл бұрын

I'm here in cny also good video, having trouble with my BX2360 changed the filters and tried to bleeding the air out of the system and it won't move fuel through the bleeder valve im at a loss what to try next aside from calling the dealer to come get it

@mw3designs 2 жыл бұрын

What were your symptoms prior to changing the fuel filters?

@tedsmith3532 2 жыл бұрын

Occasionally acted like the filters were plugged or getting water but I changed them and they don't have any water in them but the first one was dirty. And now I can't get any fuel to the bleeder at the injection pump

@mw3designs 2 жыл бұрын

@@tedsmith3532 when you turn the key can you hear the fuel pump? I would pull the hose from the pump and turn the key on to see if you have any fuel pumping. Sometimes when the pumps go bad you will still hear them, but they will only dribble a tiny bit of fuel.

@tedsmith3532 2 жыл бұрын

I can definitely hear the pump but nothing is really happening it gave me a few bubbles at the bleeder and that was it

@mikepradarelli5845 2 жыл бұрын

Can you change the front fuel filter while the front loader is still on?

@mw3designs 2 жыл бұрын

I think you would be able to access the front fuel filter with the FEL on, but I can’t be sure. I have a front brush guard mounted in the summer with my FEL, and the brush guard would have to come off to get the hood off.

@robertfortier-vp9yf Жыл бұрын

Yes you can. Just did my new fuel filter project with the loader on.