Kubota BX Knob Adjustment Explained

Рет қаралды 86,583

2 жыл бұрын

How to Adjust the Kubota BX MMM Adjustment Knob!
ROTL Merchandise:
www.rossontheland.com/
Giveaway:
I'm Excited to announce my 1000 subscriber giveaway contest! I will be giving away this prize pack containing. 1 size large T-Shirt, 1 insulated water container, 1 pair of gloves, 1 beanie, 1 RTV air freshener, 1 keyring to 1 lucky subscriber using a random draw once we surpass 1 thousand subscribers. This contest is open world wide, and I will reach out to the winner in a future video to announce the winner!
What did you do On Your Land today?
If you'd like to send items by mail, please use the following address:
PO Box 355
Richmond PO, ON, K0A2Z0
Contact: rossontheland@gmail.com
Please support us on Patreon / rossontheland
KZfaq Page Link / rossontheland
Some of the items I use in my projects
#Kubota
#BX23s
#BT603
#B&TMacFarlane
#KubotaCanada
#Wallenstein
#Wallenstein BX36s Woodchipper
#Milwaukee M18 Fuel Chainsaw
#DJI Osmo Action
#DJI
#Homestead
#Toro Time Cutter zero turn
#ZeroTurn
#Parrot Bebop 2 Drone
#ROTL
This channel is for entertainment purposes only.

Пікірлер: 177

@curtwarkentin2887 8 ай бұрын

When i forget how to get that knob to turn this is my go to video lol. I don't use that knob much so my poor memory gets me back here from time to time lol. Thanks again for the video and your time.❤

@RossOnTheLand 8 ай бұрын

Hi Curt! I'm happy it's of help! I appreciate you watching and commenting it means a lot to me. Feel free to reach out if you have suggestions or questions, I'll do my best to help.

@smeefamily54 2 жыл бұрын

I moved snow piles today so that my grass can get on with growing. Have to clean the ruts up now. Good info on the under armor. All good in the Ottawa Valley.

@RossOnTheLand 2 жыл бұрын

Nice Smee! We have some snow left in the forested areas but the main stretches are clear. Now I just need to wait for the ground to dry up enough to drive my tractor on the land! :)

@PeeksPeakHobbyHomestead 2 жыл бұрын

David @Pale Horse will be so proud of you and your seatbelt! Lol. Nice job, Ross!

@RossOnTheLand 2 жыл бұрын

Haha. That's exactly why I did it. He challenged me to wear it and so, for only the second time since owning the tractor. I did wear it haha!

@wau2si Жыл бұрын

New tractor and after 2 hrs of screaming frustration this explanation was the only clue to why we could not engage the mower and move the frozen height knob! Thank you!

@RossOnTheLand Жыл бұрын

Hey! So glad this helped. Let me know if there is anything else I can help you with. Cheers and enjoy.

@RCAFpolarexpress 2 жыл бұрын

Good evening Ross, Outstanding demos on how properly turn off an diesel engine, unbuckle your safety belt and how to bail out using 3 points contact 👌👍🧐 I was also warm in the St Laurent Valley too 👍👌😎 Outstanding demos Sir about that Knob adjustment ( ON YOUR TRACTOR ! ) 😉👌👍🧐 Great protective plate 🧐👍💪👌 Outstanding video Ross, What I've done today, I vacuum my car after 8 hrs drive with my Two Golden Retrievers 🥴🤣😉 Cheers 🍻

@RossOnTheLand 2 жыл бұрын

Hey David! We took our 4 dogs out the other day and definitely needed to vacuum the car!!! Yes I'm trying to use the seatbelt more and wanted to show that. :) Thank you for watching, does your tractor have the same adjustment Knob?

@RCAFpolarexpress 2 жыл бұрын

@@RossOnTheLand Good evening Sir, Yes Sir have the same adjustment knobs, but tomorrow night after work I will look underneath to see how it is ( same as you ! ) CHeers !

@normthibodeau5212 4 ай бұрын

Thanks for the explanation. Also, the belly pan is a great idea. The plastic hydrau. fan is very vulnerable as many have come to find out.

@RossOnTheLand 4 ай бұрын

I'm glad it helped! Yes I'm surprised it hasn't been fixed better on newer designs, but the cost of the belly pan has more than paid for itself. Have a great week, thanks for watching and commenting. Cheers.

@houndsmanone4563 Жыл бұрын

Ross. I have a Massey GC1710 sub-compact and the mid-mount mower control knob is located about the same place and I never got underneath to examine it and your demonstration clearly explained the notched control spindle very well. I too have an under armor shield for my little tractor but it's made in sectons which I haven't crawled underneath to fasten yet. I'm definitely concerned about the HST fan when I travel through wooded areas. If that HST fan gets whacked, all hell breaks loose and money just pours out your wallet. Right now I'm going through my 3rd week of pine needle raking and stacking before I have to shovel them into a cart for their final deposit at a pre-designated spot for dying pine needles (their graveyard). I'll be so dang glad when that chore's done. New SUBSCRIBER! Thanks for supporting my channel. Have a fine week, Ross. Don 👍🏼🤠

@RossOnTheLand Жыл бұрын

Hey Don! Thank you, and glad the video helped. I had my under armour ordered and sitting for installation even before my tractor arrived. I have lots of clean up going on, but it's been raining non-stop for 4 days. Everything is under water.. :( I'll be watching your videos tomorrow , very much looking forward to it. Have a good rest of the week.

@JelenOutDoors 2 жыл бұрын

Good info and visual on the knob function. Excellent idea to use a skid plate to protect the undercarriage. Although you can't use the skid plate in the winter because it interferes with your snowblower connection you would not want it on anyways because it would trap ice and snow where you don't want.

@RossOnTheLand 2 жыл бұрын

That's right Jelen, I did see another company that has a removable access panel through for the pto shaft in winter, but I'd rather remove it completely in winter as you said.

@BeginnerforBSeries 2 жыл бұрын

This one is a beauty Ross. I like the informative videos. Nice to see the mechanics behind the madness.

@RossOnTheLand 2 жыл бұрын

Thanks. Yes it's good to learn how things work. Glad you liked it. And when you check it out, it lessens the mystery.

@Wayondon 8 ай бұрын

Your vid clarified many questions I had about the control knob. Well done and thanks!

@RossOnTheLand 8 ай бұрын

I'm glad it could help! Let me know if there is anything else I can help with. I released another video today with a quick overview of how to adjust it a few minutes into the vid as well. Have a good weekend.

@mikeheilman2560 2 жыл бұрын

Really nice video Ross, very simple but informative.

@RossOnTheLand 2 жыл бұрын

Thank you Mike! With these more informational vids I try keeping them short and on point. As opposed to a story. Thank you for watching and commenting.

@joesphkennard4251 2 жыл бұрын

One of the best "show & Tell" about that knob. Thanks!

@RossOnTheLand 2 жыл бұрын

You are welcome Joesph! Much appreciated

@mikey0011 2 жыл бұрын

I only use my under armor in summer when my mower deck is off. Great information on the height adjustment. Took me around a day to figure it out lol.

@RossOnTheLand 2 жыл бұрын

Same with me Mike! Thanks. I didn't really know why it worked the way it did until I got under there. :) Makes a lot of sense now. Thank you for watching and commenting.

@steveforeman2360 Жыл бұрын

Great explanation, now I understand the function! I wasn't aware of the usefulness of a skid plate wither.

@RossOnTheLand Жыл бұрын

Hi Steve, glad it helps. Let me know if there is anything else I can help with. Have a great day.

@ODLife 2 жыл бұрын

Great video! It is always nice to really understand the mechanics to troubleshoot! 👍👍

@RossOnTheLand 2 жыл бұрын

Thank you! I agree. Helps people understand and remove some of the unknowns. Thanks for watching and commenting.

@Wolverine05 3 күн бұрын

Great video got a subscription

@RossOnTheLand 3 күн бұрын

Thank you very much! I'm glad you liked it. Thank you for the subscription and more importantly the comment. Hope you have a great day.

@taylorswf23 4 ай бұрын

Here so I don’t have to ask my husband why the knob won’t turn 😅 thanks for the help!!

@RossOnTheLand 4 ай бұрын

You are welcome, thanks for watching and commenting.

@jared5862 Жыл бұрын

Great explanation of how the knob works. Only thing I’d recommend is showing how to adjust the 3 pt to be able to get the knob to the top position and then recommending that you run the skid plate with it locked in top position. If it’s hanging down at all and you back up in some brush you just made a feed ramp to put sticks right up in the undercarriage and fan.

@RossOnTheLand Жыл бұрын

Those are good additional information I should revisit. Thank you for commenting.

@1966poker Жыл бұрын

Should lock up in Top Position and not lower at all. You may have to adjust the linkage at the left rear tire. In my case I could not get mine into the TOP position until I placed a jack under the plate and put pressure on it which then allowed me to lock in the TOP position so it will not drop when lowering a rear implement. The plate was that tight of a fit.

@RossOnTheLand Жыл бұрын

That's a good tip thank you.

@carlmartinez7399 2 ай бұрын

Thank you for explaining. Good job!

@RossOnTheLand 2 ай бұрын

You are welcome. Thanks for watching and commenting

@peterstallwood8624 8 ай бұрын

I had to work out by myself why I could only adjust the height when hitch was up. Now I know why. Thanks.

@RossOnTheLand 8 ай бұрын

You are welcome. Thanks for the comment. Have a great week.

@180Floridalife 2 жыл бұрын

1k in a day 👍👍 excellent video Ross, Knob Head 🤣🤣 great thumbnail really caught me

@RossOnTheLand 2 жыл бұрын

Thanks! I'm very happy with its performance! Thanks. How's the weather up there now? It's been raining non-stop here and we're supposed to rain for 3 more days. Everything is soooo wet, I can't run my tractor.

@180Floridalife 2 жыл бұрын

@@RossOnTheLand we still have lots of snow but the temperature has finally changed the snow just starting to melt and the sun has been shine bright up to 41F today

@rickdavid1795 Ай бұрын

Very informative Thank you

@RossOnTheLand Ай бұрын

You are welcome, let me know if there is anything else I can help you with

@PurpleCollarLife 2 жыл бұрын

Good explanation. Nice to see how it actually works.

@RossOnTheLand 2 жыл бұрын

Thanks. I have been seeing a big uptick in the number of questions and conflicting information this knob has caused. Glad to help.

@GrampiesWorkshop 2 жыл бұрын

How's she goin'? Good explanation of how this height adjustment operates. You did a good job explaining a hard to explain function of the stepped wheel!! The armor plate is a great add to the tractor e!!! Take care!

@RossOnTheLand 2 жыл бұрын

Thanks Mike it was an aspect that I didn't understand, so I'm glad I crawled under to see how it works. It's simple and now that I know, it's even easier to use.

@MJADoingStuff 2 жыл бұрын

Great job👍 I need to make a skid plate one day. I had to grind my knob so it would go into the top position. Then I found the adjustment rod😂👍🚜💨🍳

@RossOnTheLand 2 жыл бұрын

Oh ya! Can't wait to see your build vid of that fab. It's odd that such a simple Knob design causes much confusion.

@KillingItCountry 2 жыл бұрын

I’ve never touched my knob.

@RossOnTheLand 2 жыл бұрын

It's very important to be familiar with your knob, spend time getting to know it, even if it's later in life.

@bhall7997 2 жыл бұрын

Excellent video on mower knob. I predict this will be your most watched video over the next few weeks. 😁

@RossOnTheLand 2 жыл бұрын

I'm amazed at how many people discuss the knob! In forums last week. It's a hot topic!

@curtwarkentin2887 11 ай бұрын

Lol and here I am just received my new BX23S and am trying to learn how to adjust the cutter height. Loved your video. Thanks so much for explaining it. Very much appreciate your time and effort to explain this.

@RossOnTheLand 11 ай бұрын

Congratulations! Glad it was helpful! A few other things. 1) Watch the coolant level, it has been known to drop after about 30 hours as there is usually some air left in the system. 2) check the front tires diff fluid level using the yellow cap on the front diff. 3) if your throttle starts slowing down and not staying at speed, it's usually the jam nut under the throttle lever backing off, take the black grill at your feet off and reach up underneath and add a nyloc nut to it to stop that from happening. Let me know if you have any more questions.

@RichardWilson-sh3kr Жыл бұрын

Priceless…

@RossOnTheLand Жыл бұрын

Glad you found value in the video :). Have a great day.

@roadglide1142 2 жыл бұрын

Thanks for the tip

@RossOnTheLand 2 жыл бұрын

You are welcome! It's an incredibly simple design, but causes much discussion on how it functions.

@usarmyalaskanick 2 жыл бұрын

Dude you are a life saver!

@RossOnTheLand 2 жыл бұрын

I'm glad I could help. Let me know if there is anything else I can help with. Thank you for watching and commenting! Have a great day

@HeidiNJames Жыл бұрын

Thanks, very helpful!

@RossOnTheLand Жыл бұрын

You are very welcome. Thanks for watching and commenting. Have a great week.

@MyClutteredGarage 2 жыл бұрын

I don't have that control on my B2601 but I love seeing how things like this work. Thanks Ross!

@RossOnTheLand 2 жыл бұрын

You are welcome Ed! What does the B2601 use?

@MyClutteredGarage 2 жыл бұрын

@@RossOnTheLand The B2601 has a 3 pt system that stays wherever you set it, so you just use stop at the number on the lever that you want.

@bhall7997 2 жыл бұрын

@@RossOnTheLand B2601 with MMM has the knob. I believe it ships with the deck. Trust me I have it on my B2601 it was a PITA to figure out at first. 😅

@RossOnTheLand 2 жыл бұрын

Thanks B!

@johnnymansfield6010 2 ай бұрын

Thank you! That know always a pain for me. So simple.

@RossOnTheLand 2 ай бұрын

You are welcome! Glad it helps.

@MannistoCay 2 жыл бұрын

Ah cool I learned something today, I figured it was something like that but you explained it very well. Good job 👍 Looks like you're in summer mode.🏝🌴👍🍻

@RossOnTheLand 2 жыл бұрын

Thanks, but look at My community post.. we have ❄️❄️❄️ gaaaaa

@MannistoCay 2 жыл бұрын

@@RossOnTheLand where's the community post?

@RossOnTheLand 2 жыл бұрын

It should just be on my KZfaq channel but instead of a video, it's a few pictures.

@harveyotoole2029 2 ай бұрын

Great Video, thanks.

@RossOnTheLand 2 ай бұрын

Thank you! I'm glad you found it informative. Let me know if there is anything else I can help with. Have a great day.

@smanjik 2 жыл бұрын

great video!

@RossOnTheLand 2 жыл бұрын

Thank you Sevak. Have a good day.

@SeriouslyStumpd Ай бұрын

I am no longer Stump'd. Thank you sir!

@RossOnTheLand Ай бұрын

You are welcome! I'm glad it helped you! Have an awesome weekend.

@robertslatten556 2 жыл бұрын

Well okie dokie and alrighty then, as in perfect, just what I asked Google for. Good job Man, thank you so much! : ) PS, I love straight forward answers! (so hard to find theses daze...)

@RossOnTheLand 2 жыл бұрын

Thanks Robert! I'm glad you found it useful, feel free to look at some of my other videos. They may not be as straight forward, but you may find them entertaining! :) Have a great day, and let me know if there is anything else I can help you with.

@TimothyNewton 2 жыл бұрын

Enjoyed your video Ross, nice overview. Now I will order my bxpanded skid plate.

@RossOnTheLand 2 жыл бұрын

Thanks Tim. I highly recommend them. Simple install and protects the rear end very well.

@TimothyNewton 2 жыл бұрын

@@RossOnTheLand just ordered the skid plate! Thanks, also recently purchased a Landpride RCR1248, this skid plate will come in handy, thanks!

@RossOnTheLand 2 жыл бұрын

You are welcome Tim. Not sure where in the world you are, but mine took about a month to come into Ontario Canada.

@TimothyNewton 2 жыл бұрын

@@RossOnTheLand I am located in Upstate NY, I have a Bx 2680 with a few attachments. It’s always fun watching your videos. I would say we are probably similar in age and likes, I too have side by side and Motorcycle and of coarse a BX!

@RossOnTheLand 2 жыл бұрын

Thank you for the comments. It's always nice to connect with like minded people. We are relatively close all things considered then.

@stephengass6067 2 жыл бұрын

Sometimes even when I run my deck all the way up that knob gets stuck pain in the rear to unstick it.

@RossOnTheLand 2 жыл бұрын

Ya it's not a great design for sure. All I can say is make sure the rear 3pt arms are all the way up, then crawl under and verify the detents aren't binding. Let me know if there is anything I can help with.

@stephengass6067 2 жыл бұрын

@@RossOnTheLand ok ty

@dwatson4 Жыл бұрын

Mine too spray some WD40 down the shaft of the knob frees it right up

@RossOnTheLand Жыл бұрын

Thank you for the tip.

@KillingItCountry 2 жыл бұрын

Ladies and gentlemen welcome to Ross On The Land today we’re gonna talk about Ross’ knob!!! That’s right folks I said it!

@RossOnTheLand 2 жыл бұрын

I'm not ashamed! Let's normalize knob talk! Haha 😆

@KillingItCountry 2 жыл бұрын

@@RossOnTheLand you’re so right!

@MJADoingStuff 2 жыл бұрын

Ross Knob??? Brahahahaha!!

@RossOnTheLand 2 жыл бұрын

@@MJADoingStuff all about the allusive Knob!

@RCAFpolarexpress 2 жыл бұрын

🤣🥴😉👍👌🍻

@noelstractors-firewood57 2 жыл бұрын

Great explanation. I don’t have one of those tractors. But most of my garden tractors have that height adjustment knob. The shield guard underneath, is that a factory piece. Would the dealer put it on normally if it is ? And if you are backing up in the woods or muddy area, does the rear of the guard lift high enough to miss the dirt ? Had my Case 446, with 48” snow thrower, out yesterday to clean up a 20-25 cm wet heavy April snow storm. That’s what I did on my land yesterday. ! Hopefully no more. But. Never know. Can’t wait for Plow days and tractor runs. Have a good one.

@RossOnTheLand 2 жыл бұрын

Hey Noel, the under armour is an aftermarket order from a company called BXPanded. And yes you can raise it up high enough to never have it catch when going backwards. I usually keep it at Top, and this locks the arms from moving and safe. I'm finally glad our snow is gone, and temperatures are rising! We have some local events here as well and it'll be nice to see them this year as well! Thank you for watching and commenting.

@mikec8123 2 жыл бұрын

Really cool idea. Regular installation is time consuming and you can't put deck on with armor attached.

@RossOnTheLand 2 жыл бұрын

Thanks for watching and commenting Mike. let me know if there is anything else you have any questions.

@wildbill23c 2 жыл бұрын

With the deck on you don't need the skid plate as the mower deck is there to protect the under side of the tractor. Mower installation/removal for me takes maybe 5 minutes, overall 10 minutes due to having to drop the loader bucket, put the pallet forks on, go get the mower off the pallet and bring it around to the carport to install it, then remove whatever 3 point implement/attachment I have on at the time, then remove the skid plate and install the mower deck...the rear lift arms are the hardest part of the whole thing to get lined up and locked in, after that its very quick and easy.

@RossOnTheLand 2 жыл бұрын

I agree. The lift arms are the bane of my existence :) good job. Have a great weekend.

@StandingStones1776-vb6zn 2 ай бұрын

hi and thanks for the video, I have had a Kubota 1870 since 2015 I have the snow blower and front bucket and weight bucket on rear but this is the first season I have attached the belly mower and I could raise and lower the belly mower ok till yesterday I will see what is going on and spray up the linkage. So I have to raise the weight bucket all way up then adjust the mower height? learning on this mower thing

@RossOnTheLand 2 ай бұрын

Hello, and glad this helps. If it's the same type of setup, then yes. Raise the 3pt arms all the way up and. Then you should be able to rotate the height knob. It is stiff, but will rotate in either direction. Wearing gloves helps, and yes get under the deck and see if it's all gummed up with dirt and clean it out and lube it up if needed.

@tekker8308 Жыл бұрын

I've not used that on mine yet, great instruction on how it works.

@RossOnTheLand Жыл бұрын

Thank you Tekker. Let me know if there is anything else I can help you with.

@RossOnTheLand Жыл бұрын

I only use mine to hold the Under Armour, but it's good practice to move it every so often so it doesn't seize from lack of use.

@tekker8308 Жыл бұрын

@@RossOnTheLand I have to laugh only because I bought the mid mount mower deck back in Dec when I bought the BX23S, but it still hasn't come in yet. So I had planned on using the raise and lower dial, but maybe they'll come when the snow flys. 😂

@RossOnTheLand Жыл бұрын

@@tekker8308 well of course that's when it'll arrive 😭

@febbral Жыл бұрын

Hi, I have the expanded metal plate under my BX25d tractor and use my front mounted snow blower without taking the plate off, it has cut out for mid PTO drive shaft connection.

@RossOnTheLand Жыл бұрын

Hello, mine is the BXpanded Under Armor and doesn't have that cutout. I know the Bro Tek Skid plate does. It would be handy to have that cutout.

@kagnewmp12 11 ай бұрын

30 Celsius is more like 86 F and not 55 F like you had on the screen. Appreciate the video.

@RossOnTheLand 11 ай бұрын

Oh! Wow. Thanks for catching that. I guess I mistyped the numbers. Thanks for watching,

@stuartkorte1642 Жыл бұрын

Thanks. Just installed mower deck to mow and played with deck knob. Now I know how to adjust properly. Have you had any problems with the skid plate snagging on any when backing up?

@RossOnTheLand Жыл бұрын

Excellent! Glad it helped. No I have never had issues snagging stuff when backing up. I always keep the adjustment knob at "TOP" or near the top, so it moves a bit with normal daily use. I don't have a Mid Mount Mower. So I only use it for the under armour :)

@GingerSnap-ot7ez Ай бұрын

When I lower my deck mower my 3 point hitch lowers too, how do I stop that? Also show us your toolbox. Handy!

@RossOnTheLand Ай бұрын

Hello! The mower deck and 3point hitch are tied to the same action. The way to stop it is to use the numbered turning knob on the deck floor and put it to TOP. This will hold the MMM up and not let it lower when using the rear 3 point hitch. I have another video on the ammo box toolbox back in my older catalog if vids.

@vincentfisher74 Жыл бұрын

great video and it really explains it perfectly. The one thing that I was interested in was how to you see that stepped part because it seems to let down the mower deck too far. thanks

@RossOnTheLand Жыл бұрын

Hello, I'm glad it helped. It has to let it down far enough that the mower will ride along the ground at various levels depending on the ground's surface so it does need long travel. Let me know if there is anything else I can help with.

@vincentfisher74 Жыл бұрын

@@RossOnTheLand thanks for the reply, when I turn it to 4.0 it seems to go all the way to the bottom. How can i see the adjustment ratchet like you showed. Take tire off and get down and look at what angle. from the rear or left or right side. thanks

@RossOnTheLand Жыл бұрын

If your mower deck is off, slide under. It's exactly below that turn knob. You'll be able to see what's going on and what position it's in. You should then be able to work out what position it's in. Hopefully that helps.

@vincentfisher74 Жыл бұрын

@@RossOnTheLand thanks ross, I need to take it off and service it, I had a shop doing it and it was not up to my standards. I saw you video on how to get it off out the front will give it a try.

@RossOnTheLand Жыл бұрын

Excellent.

@choirmaestroJack 7 ай бұрын

Beautiful! Thanks, but re-do the video using much better lighting so we can see and observe much more easily. Thank-you!

@RossOnTheLand 7 ай бұрын

Thank you for the comment and my apologies for the poor lighting.

@tripler3724 Жыл бұрын

Two of the only few things I dislike on a BX and I own two. I prefer the Bro-Tek plates as you can leave the rear plate on with the MMM, yes a stick got past my MMM and destroyed my HST fan. I HATE not having position control 3PH like on everything else I own including my JD 1025r. Even with all that, I still prefer them; beats me why. FYI Paul and Kathy Short have some really nice improvements for several models of Kubota at Specialty Repair. I have kids, so the tail light and hazard light guards have paid for themselves.

@RossOnTheLand Жыл бұрын

Hello, yes I like the Brotech guard as well. I have to take it off for winter snowblowing so that's a pain. I have watched the Shorts for many years and love all their products. Thanks for watching and commenting.

@rockandrattleretreat5830 2 жыл бұрын

Almost 800......

@RossOnTheLand 2 жыл бұрын

Steady growth! Enjoying the community and creating content. Thank you.

@dirtgirt886 3 ай бұрын

With the body armor I'm guessing cannot use a belly mower. Is there a skid plate that will work with both a belly mower and the front mount blower?

@RossOnTheLand 3 ай бұрын

Hello, I do not believe so, but really the point of the armor is to protect the underside of the tractor, and the belly mower would be doing just that. So in my case I do not have a belly mower because I use a separate zero turn mower, I do like having the protection in the summer, and in the winter I don't usually go through the brush and branches while focusing on snow clearing the driveway and trails.

@kagnewmp12 11 ай бұрын

I'm sorry but you were correct because I thought you said 30 C but when I rewatched it and turned on the subtitles you did say 13 C which converts to 55.4 F. I still couldn't get my brackets to drop when I wanted to remount my skid plate but was able to put it on while in the up position. I have a rear blade on my BX 1880 and does it have to be in the raised position when you turn the knob to 2 in order to drop it.

@RossOnTheLand 11 ай бұрын

Oh excellent :) 👍 Yes you should put the rear blade up all the way to relieve the pressure on the knob's detents. It'll make turning the knob easier.

@chappy2312 2 ай бұрын

I have a silly newbie question… Assuming this knob is for the mid mower deck only and has no effect on the back three-point hitch?

@RossOnTheLand 2 ай бұрын

Hello, If you have the BX the height of the Mid Mower Deck is raised and lowered using the same mechanism as the rear 3 point arms. All the knob does is stop the MMM from moving full range when the 3point arms are lowered full range. Because there is only one control lever to raise and lower both... So raise the rear 3 point arms all the way up, and then rotate the knob to the desired number, and lower the 3 point arms and the MM will stop at that point.

@bridgetquinn7190 Жыл бұрын

Ok great, but how do you raise the PTO attachment??

@RossOnTheLand Жыл бұрын

Hello, it's run from the same hydraulic system, and moving the control lever will move the PTO attachment up and down onto the detent that was set. The knob only controls how far down an attachment will drop, and always has full upward motion available.

@HuserHelpers 2 жыл бұрын

Do you not pin the underarmor in the raised position all summer long?

@RossOnTheLand 2 жыл бұрын

I quickly mentioned that but maybe I should have elaborated. I usually keep the under armour at Top. But James from Killing it Country leaves his arms to have some motion so things don't seize. So I'm going to run with a bit of motion and keep stuff lubed up.

@wildbill23c 2 жыл бұрын

It should be locked in the highest position yes. Otherwise it'll hang down and potentially catch on stuff you run over. I keep my skid plate on pretty much all year as I don't use my mid mount mower very often right now. If you follow the lubrication guides you won't have any problems with stuff seizing up. Use a good tacky grease or light oil on all the components and it'll work just fine.

@Herblatz Жыл бұрын

I still can't turn my knob, no matter what position the deck is in. What am I missing?

@RossOnTheLand Жыл бұрын

Hello, my suggestion is to turn on the tractor and run the tractor at about 2.5k rpms, then use the control lever to lift the rear 3pt arms all the way up. This should remove any restrictions on the height adjustment knob. If it is still not moving, turn the tractor off and crawl under the tractor and verify that the bottom side of the height adjustment knob is not in contact with any of the detents. Hopefully that helps.

@tbryson2 2 жыл бұрын

Just took delivery of my BX23S and installed my under armor. Issue is I cannot get the knob to go to “TOP” with the under armor in place. Remove the under armor and it’ll go to “TOP” no problem. I thoroughly understand that the “top” position “tab” on the cam is not clearing the part it parks on. Is there an adjustment to rectify this?

@RossOnTheLand 2 жыл бұрын

Hey Terry, my suggestion is to remove the under armour, put the Knob at Top, turn on the tractor and pull up the 3pt control lever. Then crawl under and verify that it's working as intended. If it is, then replace the armour. When I pull up the 3pt control lever I know the armour pulls snuggly against the bottom of the deck. Let me know if this works, or if you need more help.

@tbryson2 2 жыл бұрын

Long story short, I turned the “mower link” adjustment 1.25 turns CW and it works like a charm now. I just guessed on the amount of turns, may have turned it more than it needed. In the book, this adjustment was found in mower section, subsection 5. Thanks for the closeups of the mechanism. It helped me to eyeball what was happening under there 😉👍🏼

@RossOnTheLand 2 жыл бұрын

@@tbryson2 excellent Terry! Have a great day.

@wildbill23c 2 жыл бұрын

Mine does the same thing, I crawl down next to the tractor so I can reach under it and slightly press up on the skid plate as I raise the 3 point and it'll then allow me to select TOP on the adjustment knob. The skid plate is a tight fit as its supposed to be to keep it from rattling around, so you'll have to give the skid plate a bit of an assist from under the tractor as you raise the lift arms.

@tbryson2 2 жыл бұрын

@@wildbill23c the simple adjustment I made eliminates the need to do that. But thanks for the feedback

@ronniespring8888 19 күн бұрын

Mine still won’t turn

@RossOnTheLand 19 күн бұрын

Hello, if you are sure you have lifted your rear 3 point arms to their highest position, do it again, then try using a pair of gloves to get more grip on the adjustment knob, or maybe a pair of channel lock pliers but be gentle not to wreck the plastic knob. If the underside of your deck has some corrosion or dirt build up it may need some lube or persuasion.

@mikeclarke4573 2 жыл бұрын

Ross...I'm stuck...2013 BX2670....I followed the instructions...3 pt all the way up. The knob position is in the highest setting 4. Cannot get it to rotate...can you help. I have raised and lowered the 3 pt....raised and lowered deck...nothing...any help would be appreciated

@RossOnTheLand 2 жыл бұрын

Hello Mike, and welcome. With the rear 3pt arms all the way up, (like all the way) Does the Knob wiggle at all? It may have seized. My suggestion is to crawl underneath and spray with liquid wrench or WD40 and see if you can get it to wiggle. And see if the tab of the arms are in contact with the detents on the knob. That's your best chance of seeing if there is still interference. Let me know if that works.

@mikeclarke4573 2 жыл бұрын

@@RossOnTheLand after a while and much musing .. I thought that there could be tension on the 3 pt ...so I manually pulled the deck up and placed props under the edge of the deck....much to my surprise ...the maneuver works...was able to start the disconnect for the mower...but much to my chagrin the disconnect required more than available videos...in the end...got it off...now it's time for celebration..woo hoo here comes 99!

@RossOnTheLand 2 жыл бұрын

@@mikeclarke4573 glad you got it off, so now have a look to see how your MMM adjustment knob is interfering with the 3pt arm tab. Happy day.

@mikeclarke4573 2 жыл бұрын

@@RossOnTheLand can only imagine putting that damn thing back on...oh well .. that's another day ..thanks for the video. ..it helped

@RossOnTheLand 2 жыл бұрын

@@mikeclarke4573 you are most welcome. Have a great day

@nacholibre1962 2 жыл бұрын

I’ve tried every which way and the nob still won’t turn.

@RossOnTheLand 2 жыл бұрын

It's best to crawl under and inspect the detents and see how the tab is hitting. Make sure your rear 3pt arms are absolutely fully up all the way first. Let me know how it goes.

@ipresent 2 жыл бұрын

I just bought a used BX2380. No idea what knob locks the mower, what knob hydraulic lifts the mower, but I do see the knob that is supposed to turn but doesn't. This video shows the mechanics of the lock (I guess.) Maybe I can push on it with a screw driver and see which knob above moves. Just kidding. Can somebody point out these things in a quick video. Look, if millennials ever inherit a tractor, they'll need all this basic info too. Help us out. The manual is full of locks and hydraulic lifts. Is it safe to just start yanking knobs until one does what you want? Seriously, just a quick video with out the trouble shooting. How to work it, if it's functioning as it's supposed too. Then, I'll figure out if it's broke or not.

@RossOnTheLand 2 жыл бұрын

Hello, just make sure the rear 3pt is lifted up all the way, then you should be able to rotate the control Knob. Let me know if you need any more help.