Kubota KX91 Excavator Maintenance 500 Hour Service Final Drive Oil Engine Oil & Filter Fuel FilterAir Filter Hydraulic Pilot Filter Hydraulic Return Filter Greasing Swing Bearing and Teeth
Пікірлер: 28
@livingwaters89212 жыл бұрын
Thank you so much! As someone who is new to having an excavator...and as a woman with no prior mechanical experience, I really appreciated your video!
@srmcontracting2 жыл бұрын
You're welcome, Glad to help!
@justtiresmh2 жыл бұрын
Have KX41 2008 Shop Manual , seeing is believing...detail on procedures, 5 stares!! Thanks for saving my Kubota!!
@srmcontracting2 жыл бұрын
You're very welcome, Im glad I could help!
@BestJunkRemovalNewPortRicheyFL3 жыл бұрын
Good job, so far the best maintenance video out there, most people forget to do proper maintenance and then they cry whey see the repair bill from dealer, i no longer feel sorry for them, keep up good work!
@srmcontracting3 жыл бұрын
Thank you, I'm glad you enjoyed it.
@thepragmatic6383 Жыл бұрын
Thank you very much for taking the time to document all the stages of this maintenance. I have a 2002 Kubota KX 61-2, and I need to do this maintenance. The machine still works very well, and I want it to continue to work well for many more years. What I fear is that the main drive drain and filler bolts are seized by rust.
@srmcontracting Жыл бұрын
Your welcome, clean around the edges of the bolt with a nylon brush or old tooth brush and some wd-40. Spray every day for a couple days before you plan to do the maintenance. Best of luck.
@jimtyrrell52053 жыл бұрын
Probably the most informative video I have watched on the Kubota Excavator. I have a U17 but it is very similar. Thanks for hitting all of the points on filters and greasing. Thumbs Up to This Video..
@srmcontracting3 жыл бұрын
Thank you, I appreciate it!
@thor9422 жыл бұрын
Great vid. Just what I was looking for. Thanks!
@chrisjones8937 Жыл бұрын
Very informative video, just what I was looking for to service my Kubota KX71-S.
@lakelifecraftsman2 жыл бұрын
Great informative maintenance video on the Kubota! 👍 Preventative maintenance on these mini's can save you a big unnecessary repair bill. Looking for the tilt bucket video next as that is the next addition for my KX 121-3.
@srmcontracting2 жыл бұрын
Thanks 👍
@PierreCarbonneau Жыл бұрын
Amazing video, I just bought this machine and it is very helpful. Cheers
@mattglover3178 Жыл бұрын
crack the oil filler cap or dipstick so the motor can vent, it will drain WAY faster
@NealORussa2 жыл бұрын
I have a similar machine but it's a kx161-3 super series. Are you able to change this machine to a one way flow for a brush cutter so you can use the trigger? Can you make a how to video on that?
@srmcontracting2 жыл бұрын
Yes this can be changed to one way flow but I have yet to use that function. When I do I'll be sure to record how it goes. Thanks for watching
@grantdinas2 жыл бұрын
Brilliant 👌🏽👌🏽
@srmcontracting2 жыл бұрын
Thank you
@larryiowatexasrooster93172 жыл бұрын
👍🇺🇸🇺🇸🇺🇸🗽🙏🏻 Enjoyed!
@srmcontracting2 жыл бұрын
Thank you and thanks for watching!
@mobileheavyequipmentrepair29812 жыл бұрын
Hello, love your work maybe you might have knowledge on a kubota mini excavator X040-4 with 1802 hrs. She fires up runs for 30-60 seconds then dies out. On the computer in the 2 fault codes pop up 064 Engine and 076 DPF is clogged. Got the DPF baked in the mean time replaced primarily and sec fuel filters cracked the lines she's getting fuse. Got the DPF back connected all the thermo sensors. Still same issue. Hooked up a diesel scanner found multiple fuel pressure sensors "high" and rail pressure issues, crankcase sensors issue. I've spoke to 3 different techs with Kubota one is say bec of DPF issues the kubota pcm/ecm shuts down after 4 attempts for safety reasons. Other tech told me "no" the bio diesel might have crystallized and I need a new common fuel rail with the sensors and new lines. Can you please help me I'm stuck.
@srmcontracting2 жыл бұрын
I'm sorry but I'm not familiar with those codes or that issue. I would try what the dealer recommended. Good luck with your machine, let me know how it turns out
@Zack7228 Жыл бұрын
Thank you for the thorough service explanation! I just bought a 91-3 with 1500 hours on it. I will go through this complete service before I start using it…I have no previous maintenance records. May I ask what grease do you prefer to use? Thanks again….
@srmcontracting Жыл бұрын
Your welcome, I'm glad you found it helpful. I use schaeffer #238. It has 5% moly and is very thick. The only downside is you have to order it by the case. If you don't want to order that much, just get something that has 5% moly in it. I use to use Red n Tacky but I felt it didn't stay in the pins very well.
@livingwaters89212 жыл бұрын
please make a video on replacing the v-belts.
@srmcontracting2 жыл бұрын
Thanks for the suggestion. When it comes time to change the belts I will post one.