Kubota RTV x1100c Transmission Case Crack/Hole

Рет қаралды 3,083

Жыл бұрын

Here is the list of of seals and the case part numbers at the time this video was uploaded. YOUR MACHINE MAY REQUIRE MORE PARTS. THIS IS JUST FOR INFORMATION ONLY!
Kubota K7591-11116 COVER,FRONT
Kubota 04811-06670 O-RING Quantity: 2.00
Kubota 04817-06470 O RING Quantity: 1.00
Kubota K7001-39560 OIL SEAL Quantity: 2.00
Kubota 04816-00160 Oring Quantity: 4.00
Kubota 04817-00440 O RING Quantity: 1.00
Kubota 04817-05140 O RING

Пікірлер: 18

@druggs10 Жыл бұрын

Thank you for the video. I just bought a 14 with the same issue and have been checking. I haven't found the FB group. I'm heading there now. Have already found the updated case number. Very good info.

@atvrepairsandmore2482 Жыл бұрын

No problem. I finally got mine back together and have been testing it all weekend. Seems to be doing good.

@troytompkins1261 4 ай бұрын

How do you remove the axles? I can get the control arms disconnected and shock/coil off but how does the axle pull out of the transmission?

@redsite001 Ай бұрын

I found an easier way. Remove wheels Knuckles Cv axles, next remove the bed, Exhaust shields Exhuast Top transmission mount Number the cables, brackets and hoses, remove them. Remove the starter Remove back cover behind the HST Remove sway bar bracket and swing the swaybar down and remove the two bolts on the lower transmission mounts. Now block up the engine and hoist the transmission out of the sub frame It fits out without having to take apart the suspension and sub frame. Also goes back in way easier

@srxspec2872 7 ай бұрын

Do you have the part numbers to the gear(s) and bearing(s) you replaced also?

@geraldprien3809 2 ай бұрын

What’s the name of the Facebook group? I have 2 rtv-x1100 that won’t go into reverse so I’m hoping to get some pro tip fixes before I have to rebuild the transmission. Thanks for your time

@reliccomander7020 11 ай бұрын

How did you remove the rear shocks?I don’t want to have the thing come shooting off

@redsite001 Ай бұрын

I made a comment on how I remove the transmission, leave the shocks and everything in

@jacobgleeson690 2 ай бұрын

Hi mate, I have a rtvx900 and it has just happened to me, I would imagine this should be the same transmission as your unit? Cheers

@atvrepairsandmore2482 2 ай бұрын

It should be pretty similar but I am not 100% sure since I have not messed with the 900

@ChrisBarber-ub3ek 8 ай бұрын

This video just answere a ton of my questions… where are the part numbers for case and seals located? I’m about to tear mine apart!

@ChrisBarber-ub3ek 8 ай бұрын

Never mind, lol I just found the part numbers. Thank you

@atvrepairsandmore2482 8 ай бұрын

@@ChrisBarber-ub3ek no problem. If you have any questions then feel free to ask. I’ll try to get back as fast as I can

@jacobgleeson690 2 ай бұрын

What is the Facebook site you recommend? Cheers

@atvrepairsandmore2482 2 ай бұрын

Kubota RTV Facebook group

@WyteOutAK 10 ай бұрын

Mines leaking engine oil from the crank wheel in the front. Do you know if I have to take off the whole engine or can I do it with the engine still mounted? I’m new to these kubota 1100 RTVs and having trouble with oil leak thanks

@atvrepairsandmore2482 10 ай бұрын

If you are talking about the front crank seal, you might be able to remove the seats and plastic under the seat and get to it. Or maybe try going from underneath. I am not sure since I have not had to do it yet.

@WyteOutAK 10 ай бұрын

@@atvrepairsandmore2482 awesome thanks for the info. I called a Kubota dealer and they had told me the same thing that I can get it by removing the seats with the engine still on there. Hope all works out well.