Kubota SVL 65 / 75. How to Use High Flow

  Рет қаралды 36,389

Skid-Co

Skid-Co

Жыл бұрын

I see this probably everyday on one page or another. People always ask the question. which button, which coupler, high flow, standard flow, how and why.
Well I hope this help some of you.
Thanks for Watching.

Пікірлер: 27
@aaroncorey7054
@aaroncorey7054 Жыл бұрын
Your video just saved my ass on this job! Was trying to figure out why my cold planer wasn't working properly totally underpowered I thought maybe there is a line restriction... Tomorrow morning on the job I know how it works! Thank you! Only took me 3 years of owning an SSV 65... next time I should read my service manual 😂
@skidco
@skidco Жыл бұрын
That is awesome. Im glad it could help out. It was one of those subjects I kept getting asked about so I did a video. Im really glad you found it to help out with your machine. Thanks for checking out the channel.
@Waiakalulu1
@Waiakalulu1 Жыл бұрын
Very informative. Thank you!
@dgrif9387
@dgrif9387 Жыл бұрын
Great information, TY
@JHARK312
@JHARK312 Жыл бұрын
Great info. Thanks for taking the time to make the video
@skidco
@skidco Жыл бұрын
No problem. Hope it helped
@mikeliebig8604
@mikeliebig8604 10 ай бұрын
Very good video!!!!
@skidco
@skidco 9 ай бұрын
Thank you very much!
@anthonycash4609
@anthonycash4609 Жыл бұрын
I'm not sure on the 65 and 75 but on the 95 and 97s you have 14 different settings on your dash that increase's the flow rate with each step. When hooking up high flow to an attachment you need to know the maximum flow rate the attachment will take and not set the machine higher than the attachment will handle. The sad thing is Kubota holds these settings cost to them. You have to pay to get what each setting is flowing. Which should not be that way.
@TeezleySPT
@TeezleySPT Жыл бұрын
I’ve got a screenshot of all the settings and the corresponding flow. Drop your email and I’ll send it to you
@anthonycash4609
@anthonycash4609 Жыл бұрын
@@TeezleySPT I sent my email twice but looking at the comments I don't see it. I was just wondering if you got it.
@toddkirby7977
@toddkirby7977 Жыл бұрын
@@TeezleySPT do you still have those flow settings that you could share? I need to know what level to set so that I don’t exceed 20gpm.
@TeezleySPT
@TeezleySPT Жыл бұрын
@@toddkirby7977 6 on the left is about 18 gpm. 7 on the right is about the same. Any higher and it goes above 20 gpm on the chart I have
@agriculturalmanagementgrou8344
@agriculturalmanagementgrou8344 Жыл бұрын
I have been using a 75 with a seppi drum for nearly a rear now with the high flow option activated and never noticed a difference in power while using it in standard flow. The right side of the toggle never has worked for me, only the left. Did the factory hook the male and in and out backwards? Is that why it is only working in standard flow the entire time?
@skidco
@skidco Жыл бұрын
OK so what you need to do is switch the fittings on the attachment. The mower has a check valve in the so it can't run backwards. So when you try to engage it going the other way it probably just loads up and doesn't run. I don't think you have ever ran high flow to that attachment. You may be in for a surprise with more power. You want standard flow attachments to work to the left and high flow should go to the right of the toggle. Hope it helps. Let me know.
@joshowens2219
@joshowens2219 Жыл бұрын
Don't even own one but planning on getting a couple to rent out locally. Any preference on 65 vs 75 and which would be best to rent out?
@skidco
@skidco Жыл бұрын
I like the 65 over the 75. Its lighter and a little faster hydraulics. Cheaper and easier to haul because of the 1000 pound difference in weight. They are both very comparable to each other. I own a 75 now and wish I had my 65 back every time I get back into one.
@TeezleySPT
@TeezleySPT Жыл бұрын
Correct me if I’m wrong, but I thought the male and female on the bottom of the manifold have a slightly larger center circle. Allowing for more flow than the top couplers.
@anthonycash4609
@anthonycash4609 Жыл бұрын
You are absolutely correct.
@skidco
@skidco Жыл бұрын
Correct. I get allot of people confused and they think they are two separate circuits. Thats why I made the video to try and help explain it. But yes. Larger fittings allow more flow through them with less restriction.
@jacobconfer1693
@jacobconfer1693 Жыл бұрын
I’m just about to buy the SVL65. All I plan to use it for my business is augering post holes, hammering concrete and very minimal material spreading. I was considering a snowblower maybe in the future. I wasn’t figuring on needing a high flow machine because I won’t be mowing with it. What is your opinion?
@porteeab
@porteeab Жыл бұрын
I'd consider a potential snowblower to be significant motivation to go with high flow. Take a look at specs on various models of blower and compare to the SVL specs. The price difference for high flow isn't that big in the grand scheme of things.
@skidco
@skidco Жыл бұрын
I think it would do totally fine. If your not blowing snow commercially and having to be on a big time crunch I wouldn't think you would need high flow either. Blowers don't take tons until you are throwing it 50' and running hard with them. I really liked my 65 I had.
@jacobconfer1693
@jacobconfer1693 Жыл бұрын
No I won’t be using it for commercial snow removal. And I’m still not sure if I would even get a blower for it or just use a blade.
@skidco
@skidco Жыл бұрын
You would be totally fine. I pushed snow with my SVL 65-2 on commercial sites. I like using pusher boxes. And the 65 pushed a 8' box on long pushes with heavy wet snow. I have some videos of it on my channel. Search around for them. It was probably 2 years ago. Hope it help.
@jacobconfer1693
@jacobconfer1693 Жыл бұрын
@@skidco I’m pretty sure I’ve watched them already but I will check them out again! Thanks for your opinion on the machine and keep up the videos! I enjoy them.
@raulmedina6960
@raulmedina6960 Жыл бұрын
I got a svl97 and is the same way. I think
High Flow vs  Low Flow Hydraulics
7:01
Diesel and Iron
Рет қаралды 3,5 М.
I Bought a 2023 Kubota (SVL 65-2) Skid Steer
36:45
The Christian Hardscaper
Рет қаралды 31 М.
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 25 МЛН
Каха заблудился в горах
00:57
К-Media
Рет қаралды 10 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,8 МЛН
How to Relieve Hydraulic Line Pressure
5:55
Messick's Farm Equipment
Рет қаралды 192 М.
Hooking and unhooking hydraulic hoses under pressure for Ku
1:59
Everything You NEED to Know! Kubota SVL 65-2!
7:49
Huckabones Equipment
Рет қаралды 17 М.
Kubota SVL65-2 compared to a SVL75-2.
20:27
Skid-Co
Рет қаралды 20 М.
Kubota SVL75 high flow and float activation
2:14
Russ Humphries
Рет қаралды 32 М.
Understanding the Performance of High Flow Hydraulics
2:13
Blue Diamond Attachments
Рет қаралды 25 М.
Kubota SVL75 Hydraulic Service
36:40
Jericho
Рет қаралды 21 М.
1 acre brush clearing Kubota 65-2, Rut Terminator XP
13:37
Florida Fence & Land
Рет қаралды 30 М.
I bought a BEAST!   4K
27:18
Stanley "Dirt Monkey" Genadek
Рет қаралды 128 М.
DO NOT buy that!
21:11
Stanley "Dirt Monkey" Genadek
Рет қаралды 232 М.
Смотреть до конца!
0:19
Привет, Я Ника!
Рет қаралды 1,6 МЛН
как пройти скулбоя за 36 секунд?
0:22
Holy Baam
Рет қаралды 1,2 МЛН
Хитрая ГОРНИЧНАЯ вернула ДОМ матери 😱 #shorts
0:57
Лаборатория Разрушителя
Рет қаралды 2,7 МЛН
Waka Waka 💦💃😁 #funnyshorts #rianashow
0:14
RianaShow
Рет қаралды 19 МЛН