#kubotawontstart If your Kubota tractor won't start watch this video - and try this first. For almost a Month I could not start the Kubota Tractor, come to find out after testing every switch and relay on the tractor it is a plunger switch on the what Kubota calls the (speed control pedal in the owners manual) (they should call it the Forward/Reverse pedal) Translators ? LOL. I replaced the switch watch that video here: • Starting Issues with K... The switch I got was for a 2013 L3800 Kubota TD-060-53902 yours may have a different number ...I did see some online but I would check your local Kubota dealer first. To test circuits, fuses and switches use a multimeter tester you can get one here: amzn.to/2A5ihXN , you check continuity of circuits...simple example: if you have a standard fuse you put the test wires on either end if fuse is blown it wont show on your meter, if its good needle will go up showing that current can flow through it...(Continuity) if your multi-meter doesn't have a dedicated continuity test mode, you can still perform a continuity test. Turn the dial to the lowest setting in the resistance mode in the ohms portion of the meter.