Changing the restricted boss and rollers of a Kymco Agility 50cc. This will increase your bike speed my 5-10mph. Check out my channel for more derestriction videos.
Пікірлер: 94
@BioMess6 жыл бұрын
this must be how my jonway 50cc is restricted... thx for the vid, Ive been looking for this info.
@timr6176 жыл бұрын
I had to watch this on mute so I wouldn't start screaming
@micheljuriq27905 жыл бұрын
:D :D :D
@mokebang75263 жыл бұрын
Thank you!
@johndk88 жыл бұрын
Hey mate great video, are you able to provide links to where you ordered the parts from?
@tom1900to20008 жыл бұрын
Good god this music is killing me
@rkl24855 жыл бұрын
Dude I was about to comment the same f*cking thing when I saw your comment. Terrible track selection, lol. MUTE.
@sullie355 жыл бұрын
It sucks. Not worth watching his video
@ClinesMindMetal3 жыл бұрын
@Nasir Ameer no one does give a shit so stfu.
@rwijgman87812 жыл бұрын
easy and well displayed video but tell us how manny gram the rollers and the inpakt it has i have a kymco super 8 only modified cdi(when i bought )it so 50 cc 6.5 gram vario rollers and drive 70 km a 65 when i got wind against me
@MrCurt546614 жыл бұрын
Which weight rollers did you go with and top speed?
@flexbrah98807 жыл бұрын
Or What is the optimal deristricted roller weight?
@etoshiro10214 жыл бұрын
where do you find the 10 screw like the smallest one?
@jamesconner34373 жыл бұрын
what torque power for putting the nut back on at 5:10.....and I'll not mention the music...lol.
@goncalocunha87172 жыл бұрын
Did you change the variation or did you just clean it?
@darthjar911729 күн бұрын
So what does replacing these parts do to the scooter?
@wowandre12109 жыл бұрын
Wont loctite just seal it so hard it will be hard to open again? And does the agility RS have the same parts? So this tutorial includes agility RS too?
@TheDragorin4 жыл бұрын
blue loktite can be overcome easily enough by a bit more force. red loctite is supposed to require heat to remove altho ive broken red loctite by hand several times.
@iratenews1753 Жыл бұрын
What size rollers do I put in 50cc to make faster up hill its going 15 miles sometimes slower please help it was faster before I swapped the variator. Old variator kept destroying belt
@burakkaraatepe52083 жыл бұрын
What do the grounds of drive rounds
@flowdkalle465011 ай бұрын
U have the link to buy the rollers
@robwyatt96038 жыл бұрын
better loctite it than the variator flying off whilst riding
@user-ic2wi6hv5n9 ай бұрын
Hizli gitmesi icin nekadar ağırlık takmamış lazim ?
@eliaslundstedt56074 жыл бұрын
I kinda took this apart for no reason when I found out that it's a lathed edge, and not a loose ring. fuck. also I forgot to put the washer back behind the bolt. Should I put it back?
@joeceppetelli98916 жыл бұрын
Hi, what is the size for the tool used to remove the casing at the start of the video? Can anyone help
@quinthijssen55096 жыл бұрын
Joe Ceppetelli 8
@slahoudi86146 жыл бұрын
كيفية نزع الروداج kymco agility 50c fr
@addeade2314 жыл бұрын
Kymco new like II 50i??? same ???
@VisitorE.T. Жыл бұрын
how much increase your speed on your scooter ?
@jindra66 Жыл бұрын
Hi nice video however never put lock tight on crankshaft!
@evillain9998 жыл бұрын
where is the pipe 0:50 connected? i haven't such a pipe attached at this casing.
@zerocool64524 жыл бұрын
It's just an air inlet for the fan in the CVT housing.
@coykirkpatrick42737 жыл бұрын
Is there a link to where you bought the new parts from?
@RimjobHimselfАй бұрын
AliExpress
@xid4448 жыл бұрын
what is it with the restriction boss does he replace it? pulls it out of nowhere?
@timr6176 жыл бұрын
mitchel asscheman he pulled it out of his ass
@jensmartinhedegaardanderse7675 жыл бұрын
When he removed the variator he also removed the boss
@AMAZINGPCGRAPHICS5 жыл бұрын
Will this destroy your piston quickly? already de-restricted it from 28mph to 40mph with the CDI unit, after some googling seen this upgrade will make it do 48mph.
@alien_man16695 жыл бұрын
I derestricted mine and I sometimes see 45 already. Im waiting on putting this in with the a9 camshaft because my understanding is you need to upgrade the valve springs as I've heard someone blowing theirs to hell when they hit 50. I've already hit 50 momentarily with just the cdi and it didn't sound too good :edit valve springs not piston springs
@alien_man16694 жыл бұрын
@@joshkaylor3250 yes I bought a new one. I initially pulled the wire and then cooked my whole wire assembly dropping the wire to ground and to boot the wire cutting method didn't even work
@caiwilliams14414 жыл бұрын
Do you have the new agility 50
@caiwilliams14414 жыл бұрын
And how do you de restrict it with the cdi I can’t seem to find the small black box and I have the 2018 kymco agility
@caiwilliams14414 жыл бұрын
john papajohn f
@jamesflint4608 жыл бұрын
Do you have to use an impact gun ?
@colinshard86656 жыл бұрын
not necessarily, it just makes the work easier and quicker but you can also do it by hand, i did it with my old 2-stroke that uses the same drive system, and working without an impact wrench, will mean you have to buy a special tool to immobilize the starter wheel so you can apply the strength to undo it
@colinshard86656 жыл бұрын
what size and weight are the rollers, i have the exact same bike, even down to the colour are they 15x12,or 16x13? or 18x15?
@jyriniskanen57246 жыл бұрын
Colin Shard 16×13
@jerrybanks92163 жыл бұрын
I barley got to 1:07 didn't realize i was on a radio channel shit I was looking for info
@burakkaraatepe52083 жыл бұрын
Kymco Agilitiy 50 CC Variator Rollers Weights How many grams help please
@vladimirl30652 жыл бұрын
Standard rolls are 6.5 grams. For a higher maximum speed 7-7.5 grams are recommended
@flexbrah98807 жыл бұрын
What does the rollers weight?
@JKV.4 жыл бұрын
7g
@caiwilliams14414 жыл бұрын
Did you do anything with the cdi?
@banaanqwerty42424 жыл бұрын
Have you even watched his channel
@SuperBongface5 жыл бұрын
V/10 A/.007 Hit mute at the beginning of this or .... trust me just hit mute and read through it for a happier life ;)
@Meneer.Luiten8 жыл бұрын
how mutch grams is it
@robbet79633 жыл бұрын
Got the same question
@roynijmeijer42525 жыл бұрын
What size were those new Rollers?
@JKV.4 жыл бұрын
7.0g
@Ziclickdu348 жыл бұрын
whats the reference of the rollers ?
@colinshard86656 жыл бұрын
checkout this link:www.virijavara.fi/kauppa/data/Variaattorirulla_koot.pdf this gives you the standard fitted size and weight of the rollers for your type of bike, the agility 50cc 4-stroke is fitted standard with 16x13 6,5 gram rollers
@kasperjachimczuk58994 жыл бұрын
does this also work on a kymco agillity 50 16+
@faabberg4 жыл бұрын
6.3 grams
@addeade2314 жыл бұрын
What about Kymco II Like 50i (the new kymco like)????
@claudiorebeiro36329 жыл бұрын
Is the boss 37 mm or 38 mm?
@daand129 жыл бұрын
Claudio Rebeiro 38mm
@claudiorebeiro36329 жыл бұрын
daand12 Thanks
@fs-rj2jq4 жыл бұрын
Why is the impact gun so important? I'm sure it can be done without it
@banaanqwerty42424 жыл бұрын
Bcs if u do it wrong without you will easily break the moped
@leejones30614 жыл бұрын
I'm trying to do it this min with. A socket got no chance
@michelleblau72877 жыл бұрын
What weight of rollers are you suggesting? I have a Kymco 50cc Super 8 50x... I see that the smooth boss is a 38mm... I just need to know what weight of rollers. Thanks
@elikiley17655 жыл бұрын
Michelle Blau it depends what you are trying to achieve m, fast takeoff or faster overall speed. Lighter I better for faster takeoff but for a more reliable and faster speed heavier is better
@jerrychaps83713 жыл бұрын
this is the kind of music scooter people listen to
@dis_fawkn_guy9836 Жыл бұрын
no just this guy
@JazzyLocke5 жыл бұрын
Good video-----horrible choice of music!
@JazzyLocke5 жыл бұрын
@Jose Alexander LOL!
@RellyOhBoy4 жыл бұрын
Glad my mute button works...
@cowlumbus5 жыл бұрын
Wtf is going on with his music...I cannot make it through the video!!!
@chaunceyhulbert72643 жыл бұрын
My God this music is absolutely fuckin awful. I hope the video is informative.
@leobirgenheier79866 жыл бұрын
Where in the H did you get the horrible background noise. PLEEAASSE eliminate it.