No video
l28et first start after rebuild
Рет қаралды 150
Күн бұрынstarting the l28et after rebuild
itm pistons .20 over
clevit rod and main bearings
all seals and gasket
felpro head gasket
arp head studs
smoking possibly from the old oil left in hot side turbo and downpipe and using seafoam to clean out the exhaust port and valves on head
thanks for watching
240z 260z 280z
@PeterSyravong 5 жыл бұрын
Previous issue was the rings/pistons?
@alvinheu 5 жыл бұрын
Peter Syravong did a full rebuild but the rings failed again with old injectors and fuel pressure at 40psi ill be tearing it down once more to replace rings to stop excessive smoke ill be updating in a month or 2 jus the holidays got me running wild
@PeterSyravong 5 жыл бұрын
@@alvinheu Ah ok, my previous motor had a ring issue too - smoke and blow by. Ended up getting another motor and upgraded lots of bolt ons/etc.
@alvinheu 5 жыл бұрын
Peter Syravong smoked really bad but no blow by after extensive research im thinking it bad rings from fuel washing
Malik Auto Technician
Рет қаралды 2,8 М.
Liziqi-Mechanic
Рет қаралды 168 М.
Camden Bowen
Рет қаралды 1,4 МЛН
Garage 54
Рет қаралды 4,4 МЛН