Thank you. I appreciate it 🙏

Thank you!

Thank you, dude. I appreciate it!

Then you're not looking hard enough :)

@@esk8spirit362 whatever dude 🤣

@@biggycheese4597 Nah you're right. As far as I know making these kidn of videos is just 2 people. Heathlewis (this guy) and me

Thank you, bro 🙏

Thanks for watching! Get some videos uploaded

Thank you! Nah, that spill was nothing. I absolutely recommend the stiff deck and a precision wheel for going 35+

Thank you, Nelson!

My current setup is much faster than this. Racing cars from red-light to red-light is a ton of fun. They never expect it to be this quick

@@wiggpickle I wouldn’t either! I’d love to learn how to ride this fast! I’d only drive when it rains or snows lol

They're great boards, but Lacroix has had many issues with their controllers lately. If you can find a reliable one, jump on it.

Check out my newest video 🤙

yeah, Insta360 ONE X2

This type of riding is stupid honestly. Going fast on an empty road or bike path is one thing, but you are basically invisible to cars on a busy street and have little time to respond to the unexpected at these speeds.

You sound scared

@@wiggpickle Big difference between fear and foolishness. But good luck out there.

@@somthin im an e-skater who loves crazy high speed as well, but man, I have to say I agree. doing this type of stuff on roads like these is passing the boundary between cool and stupid. cars cannot see you, and if they do, they do not expect this. its stuff like this that gets e-skating banned. no hate to Lewis, the guy knows what he's doing and is a skilled rider, but no amount of skill will save you from other drivers on the road. gotta be careful around cars. one mistake and its over. but hey, to each their own.

You need a camera capable of recording gps data. I'm using an insta360. Gopro's can do it as well. When editing, I use a program called Telemetry Overlay ($100) to apply the gps data on the video.

Thanks. That behavior from an esc is absolutely unacceptable. I've been on a Spinted controller pushing upwards of 12k watts and I've never had a fault. Some amount of Lacroix's controllers had drv fault issues. They've since redesigning, so I presume they've fixed the issue. Once you get a reliable controller, don't be afraid to regain that trust under acceleration. Ride safe🤙

@wiggpickle I've been trying to diagnose my LSSS with an issue with very brief hesitations during acceleration. Lacroix sent me a replacement 100D Stormcore and it's been good ever since although I had one event where I slowed fairly hard from a car appearing to do a running stop. After I realized the car acknowledged me I started to accelerate and the power just cut off for half a second. I was leaning forward to counter the acceleration but the moment of power loss nearly threw me off Is that something similar to what you experienced?

Lacroix 100D controllers are well known to be faulty, yet they fail to accept or acknowledge the problem. You should never feel a hesitation, stutter, power drop, etc. The 100DX is supposed to be their answer to the problem. Proceed with caution and learn to check your controller for fault codes using the VESC app. If you feel something wrong, do not turn off the board. Open the app, connect to your vesc, scroll to the terminal tab, click the 3 dot icon, select 'print faults'. There should be no fault codes. If you see any, there's an issue. Report back if you find any.

The grub screw is my fault. These are new gears and I forgot to take the grub screw out. The board has had DRV faults forever. There is an issue with the '65100' motors and/or the controller. It usually faults at full speed, which is why I usually keep it around 45. This is are rare occasion, but 1 fault is too many. I'm building a super powerful flux AT2 setup. I will definitely be on an EUC in 2022..

@@wiggpickle EUC's are fun and i dived into the world of EUC's too, but believe me... they have their flaws! My brand new Inmotion V10F died at the second charge just after 80 kilometers! Mainboard error...

I've always suspected my issue was the '65100' motors, but I've seen a couple other occurrences. The first 100D in this board burned up the first time I pushed it hard. This one has never ran smoothly. My focbox is much more trustworthy tbh.

Flux AT2 deck and enclosure, 20s p42a, 100v Ubox, Bioboard 65100 motors, hypertrucks, xcell wheels

@@wiggpickle that’s going to be one beautiful board sir! What’s your gear ratio and kv going to be?

@Niko Celia currently a 3.0, 138kv

@@wiggpickle 🤯🤯🤯. You’re looking at around 70mph loaded top speed with 8” wheels. Stoked to see the new videos you come out with that set up🤙🏼

I'm planning on doing 60 on it so I will gear if for ~56 initially, then finally ~62

Definitely. You need a rigid deck for high speed boarding. Flexing and twisting of the deck is unacceptable at speed.

@@wiggpickle ah ok so good to know! Preesh🤙🏼

That is living lol

Didn't fix it, unfortunately. It's a known issue involving these motors, the 100d, or both. It's faulted on me many times before. It's usually at full speed, once the motors have stopped accelerating, which is why I don't hold the throttle down in this video. A fault at 50 can be a slight motor twitch, or it can fully lock up the motors.

An inherently faulty controller. Lacroix controllers are not safe. I recommend changing yours before you get hurt.

Thank you. Believe me, he hears it from us all the time.

Pretty sure Heath wouldn't mind that much considering he's riding the boss's personal board for free

Edit: 100d controllers are known to be faulty and that was always the issue with my board. It's definitely a problem with the motors. I burned up the first 100d from a drv fault, installed another and the faults persist. I can see the operation running unsmoothly using the vesc tool. I've switched motors (6396) and the board runs smoothly. I've talked to a few people more knowledgeable than me in the subject and they've told me it's definitely possible. This is a known issue amogst SS boards running these motors. Lacroix has since taken them off their site. The 100d could definitely have problems at 75v, but these motors definitely cause their own issues. I've had full speed drv faults multiple times on this setup. I have 2 on video, 1 at 46 MPH and 1 at 50. The worst fault has been at 12 mph under NO LOAD. Locked up and started screaming for 20 seconds. I've been doing this a while and I'm aware of the repercussions. I've had 3 falls at 35+

@@wiggpickle I see people are having cut outs with the stormcore very often. Wonder what could be wrong with a motor to be causing faults. But 12 mph lock up of a motor and screaming, that is the ESC doing that not the motor. I mean the motor is nothing but three wires that are connected to the ESC. I guess if there were some issues where the phases would start shortening out it could cause the ESC to go haywire but phases are normally either fine or shorted. Amazes me that you keep risking your life with the same faulty setup over and over :) Also the fact that Lacroix obviously doesn't test their EScs and the motors they use, since it has so many problems. Crazy sounds and a lock up, I have had that once and that was when the motor detection detected some weird values and I tried to ride it. After a new, correct detection all was fine. Does it not mess with your brain? The more problems I have experienced the more those things get in my head. To the point where I now worry all the time, can't keep accelerating for more than a second or two, then I let go off the throttle and then throttle up for 1-2 seconds again. Got to the point where I started to drink a shot of hard alcohol before going on a ride. You know if we keep riding like this it's just a matter of time before something really happens :) Well, I hope we both remain lucky, alive and not crippled.

I replaced my LSSS Lacroix motors to 138kv Radiums. I received a replacement Stormcore 100D and rode with the original motors for a week. Seemed good then one day I felt a brief moment of power loss (or brake) under acceleration. I switched to my Radiums and had been fine for several weeks until one day I felt it again. On my original LSSS motors I'd feel it every other ride but I've so far only felt it once in the Radiums once in a few weeks. Not sure what to say it could be a combination of the motors or ESC

Controller. Check my reply to your other comment.

40 is esk8 101. Easy

@@wiggpickle until the first wobble on that speed.

Keep looking

@@wiggpickle 😂

😂