LAMPWORKING | Silver Fume Cane

LAMPWORKING | Silver Fume Cane | The Fusing Shop

Рет қаралды 4,806

Күн бұрын

In this lampworking video, I show how I make fumed cane. This cane can be used in so many different glass blowing projects and it looks amazing!
Galaxy marble made with some of this cane: • Lampworking | Galaxy M...
0:00 - Intro
1:09 - Fuming with silver
2:59 - Encasing with clear
6:06 - Pulling out the rod into cane
7:52 - Finished cane
PATREON: www.patreon.com/user?u=55033937
ETSY SHOP: www.etsy.com/shop/FusingShop
INSTAGRAM: / fusingshop
WEBSITE: thefusingshop.com/
FACEBOOK: / thefusingshop

Пікірлер: 27

@kindjordan 3 жыл бұрын

Thanks Em....much appreciate your videos!

@FusingShop 3 жыл бұрын

You got it bro!

@BrainTeasersBuff 4 ай бұрын

More fume work please!!

@FusingShop 4 ай бұрын

Hey BrainTeasers! Yes, I'm planning on making a fumed spoon video soon. This one will be 100% fume on clear glass. Stay tuned for it! All the best! Sim

@MantisRay861 3 жыл бұрын

Good ventilation is important when you blow glass at all, especially colored glass and frit! Also nice tutorial, I’ll have to try this ouy!

@FusingShop 3 жыл бұрын

Agreed Mantis! Send pics if you can, yourock@thefusingshop.com

@YehoshuaD 3 жыл бұрын

Wow, you are really cranking these out, keep going!

@FusingShop 3 жыл бұрын

Yep. Hoping to get more up this week.

@mikemccown1766 3 жыл бұрын

That was awesome I can’t wait to do that!

@FusingShop 3 жыл бұрын

Send pics when you do! yourock@fusingshop.com

@coryhaines6650 2 жыл бұрын

Another great video, thank you

@FusingShop 2 жыл бұрын

Thanks Cory!

@jacksonbleicher5016 Жыл бұрын

You put encased silver into reducing flame at the end of the show. How can it react if it’s already encased.?

@brigittekleynnaert1123 3 жыл бұрын

Hello .... Thank you for the video .... I’m so happy .... finally I understand how those beautiful swirls are added in the space marbles . Can you please help me with the annealing temperature ? Thank you 🔥🔥👌

@FusingShop 3 жыл бұрын

Hi Brigitte, welcome to the Fusing Shop channel! You have to anneal your piece 1 hour for every 1/4 inch. So if you make a one-inch marble, you have to anneal it for 4 hours. I anneal at 1,050 degrees, using the formula to figure out the anneal time. After that, you must bring the temperature down to the strain point which is about 960 degrees and keep the kiln at that temperature for the same time as you annealed. I hope this helps! Feel free to email me any questions at yourock@thefusingshop.com

@brigittekleynnaert1123 3 жыл бұрын

@@FusingShop Thank you so much..... this is so helpfull 👌

@amoremorte3330333 2 жыл бұрын

Ah I see

@jkwalsh58 Жыл бұрын

I would be more than happy to subscribe to some of these KZfaq videos. If they would tell me where I can buy the items they are using.

@FusingShop Жыл бұрын

www.mountainglassarts.com

@carolgouyer 3 жыл бұрын

Dear Sim, thank you very much for your video for the fume cane. I put some silver on a large rod of boro with my silver wire, but I think I should put it on a small boro rod. Do you have a video showing how to put the silver on the rod. Thank you.

@carolgouyer 3 жыл бұрын

When I tried the fuming I don’t see the vaporisation of the silver. Do I have to heat more the silver on the rod ?

@FusingShop 3 жыл бұрын

Hi Lacaro! It's not hard to get the silver on a rod. I usually use a 5 mm rod and cut a small piece of silver that I put on my graphite pad. Heat the rod up so it's nice and hot and touch it to the silver. The silver may not pick up on the first try so you may have to repeat the process.

@FusingShop 3 жыл бұрын

@@carolgouyer That's hard to answer without seeing what you are doing. You have to get the flame just right for the fume to work.

@carolgouyer 3 жыл бұрын

@@FusingShop Thank you for your comment, I will try with a 5 mm boro rod. I have a kiln so I can annealed the fume rod after. Best regards.

@FusingShop 3 жыл бұрын

@@carolgouyer Sounds good! Please feel free to reach out with any questions.