This was filmed in the summer - hence the shorts - but the stock has only just arrived. These are for sale on our website www.powerfuluk.com/catalogsearch/result?q=llm804

I love how you add extra little bits like additional clips, cos you'll probably lose some. It's the lil things that count. 11/10

They’d be pretty cool tinted to blend in to 👍🏼. I’ve not even got a defender (want one though) but find this channel interesting, informative and fun 😆

Thank you SO much for making this solution. I just installed them yesterday and your video was instrumental in me being able to do it by myself. These extra reverse lights really solved a problem I’ve had since the first day I had my Defender, the backup camera can hardly see anything at night. Now I can see everything in my backup camera which makes it so much safer.

Educational silliness you and Tyler are my Melcombe & Wise.🤗🤣🇬🇧

Love the video and how you go into such detail and even educate us on every little detail that isn’t even related to what your video is about. All of those related and non related explanations really help us understand everything that goes into that piece. When you show us the real installation process and all the little things that can go wrong, that is real world and it helps. Can you show us the reverse lights and how the video looks with them on in the dark? Thanks again.

Just installed these on my wife's '22 Defender 110... she is very happy with the final product. There is now good clear visibility behind the vehicle both in the mirrors and on the cameras. Getting that panel off was no joke the first time, but I used a little piece of tape to mark where the fasteners were on the sides, not the white clips, and doing the second one I push/pry at that spot and it came off much easier.

Just installed these on a MY2023 D110X and everything went well. Lost two clips, so the extras were much appreciated👍👍 I used painters tape around the edges to protect the PPF, which I think was a good idea. I took John Willett’s suggestion and soldered the connection at the bench. Prior to that I tested the connection by just using wire nuts to hold everything together and plugged it all together. After starting and confirming the positive connection, I soldered, heat shrinked, and taped the whole thing together. As others have already said, the lights make a huge difference in being able to see what’s behind you at night, and just as importantly look factory. Well done Simon and the PowerfulUK Crew!!

I juts installed the reverse lights on my Defender 110 It’s absolutely great. Looks like it’s a factory fitted. High quality product and the installation instructions is next level. Thank you so much for your products and videos.

Excellent worthwhile and practical addition to the vehicle. With the essential extra safety aspect to clinch it.

A Great Product! Well done gentlemen. Also, thank you for making these videos, I’ve learned a lot about my L663 Defender from your teams work.

Just finished my install, went quite smoothly. Sheesh those panels are a pain to get off, and definitely feels like you are breaking something in the process. Thank you for the extra clips included also.

I just installed these and continue to be very impressed with the build quality of your products. I can't imagine how much LR would charge for these! :-)

I can’t see me buying a defender but I still watch because I like the videos and the problem solving. (I have a hilux 😝)

Tinkle tinkly tinkle… thank you for including the clips

What such a perfect upgrade guys!

What a brilliant idea - love the shorts lol

Looks great. Cracking work. Now for a Freelander 2 version :)

I've just fitted these. Really easy to do. Do the soldering and heat shrink on a bench first, having mounted the lights to the blocks before you do. Make them up as a unit, it's easier to fit them when outside on the vehicle.

Just added these puppies, toughest part for me was separating the original connector, but job done and nicer to fit in the summer when we have daylight hours and sunshine - now all set for autumn/winter - should make life a bit easier and looks great 👍🤓😎

Simon, was looking at these + the gloss black spoiler, and somehow tapping into the Running lights, so that way, you can have Amber running lights on the spoiler, then can use the reverse lights as intended as well. I bought these for the reverse pocket like you have, but doesn't hurt to have more reverse lights (more cowbell style)

This looks super neat and have added to my wish list - Great job as always.

Great video (as always) and a really great accessory. 😃 One thing - why not solder the light to the adaptor cable *before* installing the adaptor on the car? Surely you would get a better solder connection on the bench???

It would be nice if the injection-moulded piece had some sort of posts on it that the light pushed on to instead of needing to be screwed on, so you wouldn't have to have the silver-coloured screw heads showing. Or some covers for the screws.

Well done team!

Hi . I fitted these and am very pleased with the outcome , they make such a huge difference and I can now reverse in the dark without any concerns . I just wanted some feedback from those who have already fitted theirs and have just attached theirs using the double sided tape have they had any problems or is this method strong enough to hold the lights in place . Any feedback would be greatly appreciated .

Well done 👍

One comment - turns out I had a short when the "extra" wires (I didnt order the turn signal version) was touching another wire even after what i thought was a good electrical tape wrap job. I should have used heat shrink on the extra wires to eliminate that problem.

Well done you poms surprise me.

Good job 👍

amazing channel

Excellent mod.

Boom! Just ordered. Can you also do a cargo tray for the boot?

Just received these and the quality is even better I thought it would be! Thank you! Is there any top tip for weatherproofing wires on the tie-in loom that are not used?

Great job boys, but I think I would screw on your fitting to original plastic and not use D/S tape, then when and if you need to remove/ replace it you unscrew fitting then I think it would easier to unclip original plastic trim from vehicle which seems very hard work. Your thoughts on this would be appreciated Thanks Pete

Nice solution and better than V1! So now you consider to design a light that can cover the whole area/full width? :)

Are the ones shown here the same as on the website? Looks like the ones on the website have darker lenses (which I was going to request). Going to order these now. Great work

Question guys: I installed these, followed the directions, triple checked the wiring and soldered them. Neither side activates the indicator light. Reverse works perfect, but nothing with either left/right indicator. What could be the issue or is there some reset required for the LR to recognize the new indicators?

The current standard reverse lights are absolutely appalling 😮. Off to your shop now.. Also the interior light in the back is also junk. If the boot is full it actually covers the original lights.. Come on LR it’s a utility vehicle!!!

Rather unfortunate to see I was sent V1 when I ordered last month. Getting an upgraded part seems to involve me paying to ship original kit back to the UK at my cost and reordering but V2 is not shown on their website. Feeling a little taken!

Surly the indicator should be mounted on the door jam below the lock so when open can still be seen??

Simon do you have a video on the installation of deployable side steps on a L405? Thanks

i have purchased and installed them. the reverse lights are working but the yellow hazards don’t seem to turn on. i followed your instructions. is there a difference between the US spec car wirint

I just like reading all the comments! That cold start idle speed sounds high?..My D/Sport SD4 240 doesn’t do any fast idle at all…maybe just the petrols need that help.🤔😐😐😐😐

Does your rear light that sweeps work in US cars

Any tips for getting the electrical connector unplugged? My Defender is a year old and has plenty of dust. I cannot get the connector unplugged despite cleaning it with a toothbrush. Should I try a lubricant?

Hello I buy by mistake an American smoke lights for my Defender but mine use ámbar indicators, so , I wonder if I buy this kit , I can fix my problem having the indicators with revers on them ? Thanks for responde

Wow ... LR are decades BEHIND the early RAV4 where a shorter door checkrod was deployed.

Dang it! I just got the first version :( Any way to get the injection molded pieces seperate?

I had to laugh when you said "When your Defender breaks-down " Ha Ha

Quick question boys, is it possible to move LEDS so that amber units are outermost for best visibility and white units innermost ? Thanks again Pete

Do you have the part number for the bumper part the light attached to?

You remove the top strip of the two part cover and then if you ever wanted to remove those extra lights then you can then re-stick on the top part.... if any of that made any sense at all(??)!!! 😁😁

Another late Boom! ;-(

Will these fit a 130?

Hi 👋