Brilliant as usual Carl, but we don’t see enough of you. More please 🙏

I read the entire Ryan’s kzfaq.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans and was able to make a shed plan. Using Ryan’s Shed Plans alone, the shed itself is great. Where I wish I knew more is with respect to ground preparation and foundations. Maybe that's beyond the scope of Ryan’s Shed Plans.

Extraordinary levels of craftsmanship, not to mention videography and storytelling. Magnificent

Getting ready for more resto on the property 👍

A dream come true. Good to be back. Thanks to Jackery for helping to make this happen. Remember, 15% off their products for Easter: UK sale (April 11-17th): bit.ly/3KDpjo7 USA sale (April 17-24th): bit.ly/3UEvoFo

Very well planned out…good work.

Very cool, my uncle did something similar to his work truck a while ago. One recommendation : the flap that you need to lift up before pulling out the drawer is superfluous. You already have your back gate to act as the same thing. So i suggest that you take it out and instead make it part of the drawer itself. That will also allow you to more easily access items in the back of the drawer that you'd normally have to pry in between that door and the drawer.

Very nice. Looking forward to seeing what you have planned for that this summer.

Nice DIY project expertly filmed and edited. The voice off is the best choice for this sort of thing I always think. I'm always impressed by the excellent tools you use and have discovered a few I've not seen before. Jackery must be very pleased with their investment.

I was literally about to ask about the jacket when I saw your PS at the end. As a workwear manufacturer myself, I appreciate the design and functionality. Great looking jacket.

That's awesome! Really pro job! My only suggestion would be some sort of straps for the tool boxes and jackery. I've seen people really hurt when stuff Flys around a vehicle in an accident.

As a hobbyist woodworker constantly involved with home improvement projects I most value your focus on precision, attention to detail and in the overall quality of craftsmanship, regardless of the project underway. Thank you Carl for posting these wonderful videos.

You are a veritable fount of creative, spatial and useful building, Carl Rogers. If/when there might be updates to your Defender, you'll have worked out the back door panel and " electrical-, camera-and charger bits, too. Glad you and your instructional, amazing, scientifically sound/researched projects/builds documented in videos have once again resurfaced. Stay healthy, safe, warm and moderately productive. These videos, your humor and explication are joys to witness. Almost like being there.😊❤

looks great, can't beat a landrover in so many ways! You might find it a good idea to put the sound insulation on the sides and rear door to help quieten the ride a little further. I know someone who lined their rear door with sound and heat insulation and then just covered it with some plywood to make it look tidy, perfectly serviceable!

I accidently found your channel and watched whole day. It was 40 years ago we lived in New Jersey, US. We bought the new construction house and a whole lot of things waited for us. Tilling an entryway and finishing a basement, and building a deck. It was so hard but so fun too. Now my loving husband passed and I am back in Korea. I am 70 years old now but I still remember vividly how we installed a closet door in the basement. Thank you so much for the wonderful videos

The only thing I would add would be rubber washers on the underside nand some rustoleum like paint around the holes to prevent rust. LOVE the Defender, we cant get that model in the states, they were cut off in 93. Now all we can get is after market restores or the WAY over priced new model. Bouns points for it being a stick shift.

Great video! So satisfying watching you plan and execute perfectly those modifications! 🙌

Awesome! I love how you are not hindered by any obstacles and design your way into success. My own garage is literally four times as big as yours. You've inspired me to finish setting up my own shop and get to work on all those projects I've been mulling over for years. Cheers!

Nice job on matching the pattern of the aluminum cover. No detail over looked. I’m so impressed with your skills. Great job.

Great idea, well executed. I'm about to do a similar design for a 1st Generation Honda CRV which will continue to serve as a passenger car, but must have a similar, but removable, setup for woodworking tools as this car will sometimes be used to deliver woodworking classes to rural communities. Quite a challenge design-wise but your design has given me some ideas. In your case, the only change I would have made would be to put the back cover hinged so it opens down below the drawer instead of upwards as it is currently. This way it won't hinder access to the back compartment of the drawer.

I travelled around Oz back in early 2000’s in a 60 series Land Cruiser. The early days of duel battery systems in cars. One thing I look at today with lithium iron batteries is wow that would have helped in so many ways. Lovely job as usual. No sure if you already have one, grab yourself a rail square, track saw becomes a table saw and 90 degree mitre, if not a slower one. I bought one and that thought goes through your head why did I not get one earlier 👍🏻

Awesome Carl! Beautiful job and will be so very functional for you, great layout. Love the soft close, they are handy and easy.

Carl, I’m always impressed with how well planned out your projects are and this is no exception. You mentioned on Patreon that this was your most expensive project and I assume it’s because the Defender is in good mechanical condition and a relatively recent model. My only suggestion is that you might want to put some removable cling film on the back windows so prospective thieves can’t see into your vehicle when it’s parked (yes, I have a suspicious streak!)

Bravo ! Extremely well done and nice to see. You are truly creative. I love everything you did.

Cool project. 👍 You know you can just knock out the err, knock outs, on the metal back box for the socket. No need to drill them.

Brilliant the drawer will really shine when you fill up the space on top of the unit!

What a setup and fantastic workmanship as usual. Another great vid 👌

Wow, incredible craftsmanship 😊

Carl, I did the same sound deadening long ago to a Fiat 128 tin can. It really helped a lot. Your drawer system looks fabulous! Congrat's.

You’re very talented Carl! Love your projects! Can’t wait to see more of your videos. Stay Safe!

YESSSS. Look forward to watching this tomorrow 🙌🏼

Good to see you back, my husband is an engineer and will love watching this. 😊

Slick Rover Carl, slick set up and slick work ethic!

Outstanding! Wicked cool! Nicely done.

Wow, that’s really impressive. Awesome job Carl 😊

I love the videos of the works you have done on the defences, please make more, more!!

Beautiful work and attention to detail!

The book match cover is perfect. Still have a load space, too. Nice job.

What a great build. May I suggest you put a couple of magnets in that door at the rear. Then it won't pop open from bumps. BTDT.

Love all of your videos. I just wish there were more of them

Great work as always. Looking forward to seeing some adventures in the landy.

Carl, your attention to detail is unmatched ! Keep on keeping on! Hope to see more videos and useful items to buy!

Beautiful work man!

Immense satisfaction when you make a place for everything👏🏼

Nice job Carl, done with the usual Rogers’ attention to detail.

Enjoyed every minute. Provided me with ideas and things to consider for the future. Thanks.

Very nice setup Carl, you do some amazing work... Take care my friend...

You do beautiful work!!

Nice job Good to see craftsman, young and old

Great to see you back at it! The Defender is looking great! Hope all is well with you and take good care!

Your craftsmanship is insane. Liked the video, again. Love to see you back at the farm in France.

Great setup!

Great project and result. Particularly like the led lights you added. Personally, I’d cut two small holes in the rear door card for the protruding handles but I’m sure there is a more elegant solution too.

nicely organized

Very nice setup!

For the draw sliders, you could always have used countersunk bolts just to give you extra peace of mind. Love these types of videos, you get to see everyone's creativity and designs, really interesting! Top job my friend.

Masterfully done!

Nice work Carl, kudos.

Even a tool box is made to extreme procession....why am I not surprised....hope to see you more often.....ty

I found this video without knowing your work. Really impressive work! I'm going to see all your videos I guess.... Thanks!

Nice, nice. Pretty nice. Thanks for sharing!

Well done. Top Notch carpentry and conceptualizing. Also love the Land Rover - fantastic channel altogether - keep 'em coming!

Vry functional, I enjoyed watching you building the upgrade.

Best drawer build I've seen yet!

Welcome back! Nice storage area for your Defender!

Very nice work. Great solution to storage needs.

Definitely a cool project! Could use some basic Velcro for your chargers and wires in that section. It would give you some options of changing it later.

So glad you are back! I love your fine and detailed work! :)

Clean build mate!

I dig the drone-like footage from the monopod-based 360° camera at 25:37. I would’ve missed it if not for the cast shadow on the road. Great video from start to finish.

Nice work Carl.

Thank you for sharing

I love Defender 90s! Thanks

everything fits like a glove!

Great work Carl. My Father has a 90. That's given me some great ideas. Thanks 👍

Excellent work.superbly executed. 👍👍

Love and want a Defender 90 so bad! Awesome build

Very functional. I love this

Perfect work!!!

In the U.S., when I would go on the road with crafts I made to sell at a crafts fair in another state, I bought something called Inland Marine auto insurance. It was in addition to what I had already for auto insurance. You might want to look into something like this, if for nothing less than peace of mind. Here in the states, public places near the highway or places that get a lot of daily tourists attract junkies like flies on poo-poo. BTW- your video was perfectly done. Very professional. No facial close ups, no stop action talk to the camera shots, everything perfectly filmed, well thought out design. Well done. 🌋

Outstanding job!!!

Very nice job as always.

Good luck to anyone trying to do something similar with a new Defender. Good to see you giving a shout out to the Ineos Grenadier. It's the new Defender we wanted.

Carl good to see your video come up. Great project👍👍👍

Great job and very pleased you used a Land Rover keep m coming!!!

Killer set up.

Thoroughly enjoyed this!

Really nice job.

Epic build

Quite precise build, good job... now just get an air mattress and sleeping bag and you have an over nighter, for a long explore/trip... 👍👍

Excellent work as always 👍🏻

Love your work bro!! Keep it up!! Greetings from Puerto Rico 🇵🇷!!

Another work of art, and I don’t mean the Landie. Excellent work!

Carl, I came across your videos sometime ago, and watched all of them, until you dissapeared from KZfaq a while back. Very impressed with the work you've shown. @8:37 I was glad to see that while installing the metal drawer slides, it would appear that you were installing a screw into every mounting hole on both the cabinet side member and on the drawer side member. It is very important that this be done on all drawer slide installations, no mater what the application will be. If this is not done, the drawer slides will not be able to meet their advertised weight capacity, and could also void the product warranty on the slides if they become damaged. One other thing about drawer slides, when calculating the exterior width of a drawer, you should allow 1/64" of additional clearance between the interior of the cabinet side and the exterior of the drawer side. This will help the slides to function properly. If there is not enough clearance allowed, the slides can bind against all of the moving parts and cause the slides to fail prematurely. It is nice to see you back, and I am looking to see more of your great work!

Great work, as usual!

Carl, you're an absolute artist. That is exceptional work.

Very nice work!

Awesome build! Wow! I’d love to do that to my SUV 🚙 ❤

Awesome job Carl!

Very nice work.