A video by an Englishman filmed in France swearing in German xD, perfect!

One of the few channels I don't scrub through contents, Enjoyable from beginning to end. Thanks Carl.

3:25 I don't care what happened in the video I was just happy to see that you came back and through the frisbee for the 🐶

I watch a lot of creators on you tube and I can genuinely say, that any video you post I watch from start to finish without skipping any parts. You are indeed a truly skilled craftsman Sir. Keep up the good work.

so glad you don't edit off the mistakes. i can relate a lot more.

Thank you for the fact that there is no music to be heard. I like it when you can hear your own noises, e.g. the kiln, the ratchet when screwing things together, all the machines. I can't wait to see what happens with the shepherd's wagon.👋👌🖖

As a german subscriber I can assure you, your „Oh Scheiße“ was very outhentic and very well pronounced!

The way you said “it’s not my proudest moment” reminds me of almost every one of my diy projects!!

Love the Oak face 5:27

I've been Blacksmithing for 30+ years, including for the National Park Service, and personally I think inserting the steel strap within the anvil stump was a work of genius!! Good job!! For future reference, to increase that 14mm hole to 16mm, you could have taken the broken 16mm drill bit and heated it in the forge to yellow hot and burned the holes to size. I've done that many times. It could have saved you some money.

yay its carl time again

Very nice! As a blacksmith, I wholeheartedly approve of your build. And, to be honest, those hooks you made are exceptional for someone who hasn't spent much time at the anvil! The only thing I'd suggest is that your finials always curl to the outside rather than the inside of the hook. This gives you a more "rational" appearance and doesn't clog up the space inside the hook where you want to hold things. What you've done is basically create a barb like on a fish hook and it'll always be grabbing at what you hang there, making removing things an aggravation. Next step should be to forge some punches so you can forge in a depression to accept a countersunk screw head just below the leaf end you forged. This gives you two screws per hook and prevents the hook from rotating on the wall and scratching things up. Plus, it adds a little more topographical change to the shank and really drives home how this is hand-forged iron goodness! There's no end to what you can achieve now that you have a forge and anvil. Just remember that we blacksmiths are called the King of the Trades for a reason. Honor that legacy in everything you forge, and you'll go far in life.

As a young girl I spent many hours watching my German Dad in his workshop. So hearing you swear in his mother tongue was priceless ❤❤ Love your work!

When I'm watching your videos, I always have to think about the saying from John Butler: "He was a quiet man, an artist, a craftsman." Beautiful work Carl 😍

A good boy? Well, yes he is! Thanks for remembering, Carl.

I saw on another YT channel that a good way to check the solidity of the mounting for your anvil is to drop a ball bearing from a set height onto the flat part of the anvil. The higher the bounce, the more force is being transferred back into the ball bearing, and not being absorbed into the mounting/floor.

Oh FFS, now I'm off on a descent into anvils, big hammers & forging rabbit holes! But as ever, thanks, an astonishing display of attention to detail and squareness.

A tip for using an auger bit in a power drill - grind the threads off the lead screw so it won't pull the bit into the wood. Then you can pull out the drill to clear the chips while keeping it running. This style of drill was originally made for use in a hand brace where you need the help from the screw. They can also be sharpened with a file if you mess up the cutting edges . Good luck, great videos, thanks

Tips from a Blacksmith. You don't need a really heavy hammer. Lifting a heavy hammer is very tiring. A hammer two thirds the size will be much easier to handle and will only require a tiny bit more work time. You might have noticed that blacksmiths appear to strike the anvil rather than the piece of steel being forged. This also helps reduce strain on the arm. Moving the hammer sideways away from the work and letting it fall on the anvil means the anvil takes the shock rather than bone and muscle. Quenching steel hardens it and makes it brittle. If the steel is much more than a couple of millimetres in thickness, prepare to go through lots of drill bits. Just letting the steel cool gently overnight will make drilling far easier. I definitely like your chain strap. The chain will stretch over time and the threaded loops will address this perfectly. Well done.

Again with the long holes! All I could think of was the Indiana Jones line, "Snakes! Why is it always snakes?!"

I see new carl rogers video, i click.

Excellent! And thanks for showing how the work ACTUALLY went. All too often, these videos make things look fast and effortless - and that is simply not reality.

Really enjoyed the craftsmanship, but the video creation and editing is right up there too. Well done.

it’s amazing how just knocking up a jig or a stand or a temporary bench to make doing another job easier can end up being a massive job in itself. but then doing it right from the start is always the best way, and your new anvil stand will last generations. and only get better with age! fair play for including your fouls ups with the rods too. fantastic video as always Carl

I’ve been hoping for a new installment and this did not disappoint! Is there no aspect of a build that you won’t attempt yourself? Your quick mind and willingness to show the missteps as well as the successes help make your videos such a joy to watch. And Rafa is indeed a very good boy!

Your dog wants a big hug

I was told to keep the anvil as close as possible to the furnace to keep the heat in the work.

You learn fast. Smithing is soooooo much fun. You can knock out beautiful, simple ,functional pieces really quickly. Great for pressies.

Really ingenious idea for the chain! Love it

Thank you. I love watching. My late father was a cabinet maker.

I'm glad to see you gave your dog some love, because when he's gone you're going to miss him a lot

Your work is always so artistic and beautiful

I thoroughly enjoyed this video. Your planning, craftsmanship and creativity are all to be admired. The hooks you made looked great. Nice job.

I've missed your videos! Glad you're back....

Always a pleasure to watch your videos - thank you for sharing.

That was fascinating. You have a brilliant amount of skill and patience. Top work.

Beautiful work you did on the reclaimed oak stand, it's gorgeous. That anvil look mighty heavy not that the stand isn't. I liked that you chained the anvil on, and nice black smithing on the hooks. Thank you.

I am amazed by your precision!

Brilliant way of assembly, congratulations

You've unlocked new skills. Well done.

Brilliant video Carl, looking forward to seeing you construct the tow hook

Well, that was immensely fun!! Love your "oh sh*t" moments. Everyone has them and I'm glad you include them. It was especially fun watching you learn a new skill!!

Satisfying progress!

Honest mistake....saw that coming while you were drilling. Been there and done that, but I didn't have a snappy blue jacket to wear. (but it IS on my wishlist) Your channel is awesome, Carl, thanks for sharing.

The breaking off of the lead screw was a blessing - you should take that auger bit and dress it up to create a “Bare Foot Auger”. You can buy such an auger for ship building but a lot of folks just build their own. The problem with drilling difficult woods such as oak is that the lead screw has too much pull and it will not follow a straight line - see one of the most recent episodes of Tips from a shipwright on KZfaq. Lou shows how a bare foot auger works and how to make one. You want to start with a ships auger or electricians auger. Not to be critical but everyone I know just gets a tree stump and cuts it level “enough” with a chainsaw. I was taught to make four oversized staples out of 1/2 round stock and drive them in at an angle to capture the anvils four feet

Nice job, young man. You're right determined to turn yourself into a world-class craftsman yet. Keep up that work ethic, and you'll be there in no time.

Absolutely bloomin' brilliant, Carl Vulcan Rogers!!

That was sooooooo enjoyable to watch Carl !

I don't care what you do Carl , I would watch you , no matter what. Those hooks turned out quite nicely. I think you will make a pretty good blacksmith. You've got a knack for working with your hands.

Carl - you are getting better at presenting - do more of it!

Installing the flat bar to be used as a securing device for the anvil was pure genius! Never seen that before...really hope it works well over the long run...just brilliant :)

Everytime enjoying your skills❤

Thanks Carl

Great vid Carl - really enjoyed!

Another enjoyable watch, thanks Carl 👍🏼

You’re a total legend Carl! ⭐️⭐️⭐️⭐️⭐️

Great work. Reminds me of when I started on the forge. It is satisfying work, for sure.

blacksmithing is hard, time consuming, work. I know a farrier/smithy and watching him hammer and shape steel is incredible to watch. He has been at it a long time and can make you just about anything you could imagine now.

Well done! You are blacksmithing like a boss!

Toujours des superbes vidéos, merci Carl

Loved the ‘blink and you’ll miss it’ silhouette shot👍

Nice Job. 👍 I love black bear forge as well. Thank for your videos.

Today just got a whole lot better 👌🏻

Excellent stuff as usual Carl!

Thank you 🙏

Wow that just looks incredibly pleasant to do. I'm sure it's tricky but so rewarding

I bought a COTO jacket and been using it for a few days, its awesome. I love it !

so good to be able to reuse some old oak, fantastic wood. Once used a telegraph pole isolator beam for a piece. Beautiful. Looks like a decent ironmongers too. Stuff you want at a price you are willing to pay...as opposed to.... ...then they run out of stock. Nice bolt bodge.

Amazing as always. The editing is getting really good too! Keep it up man!

that chain mounting solution is simply brilliant

For once a sponsor of a video that actually is relevant and I am interested in. Thanks.

dude, you are an artist.. I envy you so much... very courageous ... thanks

Really nice work Carl

Awesome as usual. great work Carl

Welcome to the blacksmiths family enjoy it and be patient.

It would be great if you posted more, it’s is almost therapeutic to watch, so calm and relaxed. Your skills are impressive and you are talented with commentating your video’s too. You can be very proud of yourself. When you see what you have achieved so far from the smaller things like this anvil, the chassis for the carriage and the even bigger things like a completely new roof on that big barn. I do something completely different myself but I hope I can watch a new one soon.

Very nice work, man, thanks for sharing!

("My kingdom for a bandsaw!") As always, great work on old wood! I'm so jealous....

Vous tellement doué, ça fait plaisir de regarder vos vidéos. Merci pour le partage 🔥🔥🔥♥️😊🇧🇪

Carl another really enjoyable episode mate… interesting… informative…. not forgetting the problem solving …. More please…. Big shoutout to your family 👍

Practice - Practice - Practice. And then more practice. You have the right temperament to become good. 👍👍👍

Very enjoyable! I like that you're not afraid to try Asian-Made products such as the Vevor anvil, an item that many would sneer at. Instead, they would prefer to do without for weeks, months, even years, waiting for just the right hundreds of years old and obscenely priced version to come their way.

Love the content and it’s inspiring to see you work through different issues. I truly look forward to the new content. Your modesty is also nice. You admit when you’re new to something and learning. Disarms the haters ….a little

Thank you for putting out this beautiful content, it is so calm, interesting and just a joy to watch. It was also very nice to see you try out new things, really curious where the blacksmithing journey will lead you in the future. :)

33:10:Very enjoyable and very therapeutic.this sums it all up for what the hobby is .

Now that you are a proper "smithy" this changes the game!!! Good on ya mate for tackling a new trade!!

Well done, looks fantastic!

So happy to look your video

Brilliant, really enjoyed this!

That anvil "horn" looks as smooth as a baby's bottom ! Well done !

You sure can hear how solid that wood is when you dropped that timber!

Love the prototype notebook

Отличная работа, очень люблю смотреть твои ролики. Круто наблюдать не только за успехами, но и за ошибками из которых и состоит опыт👍

Very handsome anvil stand you made there, you definitely honoured the material. Very high quality video as usual, you have such high standards. And I’m joining the mind your back chorus. It’s a skill like any other.

Love your work! It might be worth looking into Nyloc nuts or thread locking compounds if you find the nuts are loosening over time due to vibration. It should be easy enough to swap them out if needed. Looking forward to the next video!

Wonderful so enjoyed that episode thank you . John from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

It can't just be me that finds the sound of the oak hitting the dirt floor so very satisfying?

A wonderful video. Congratulations. Before the first blow to the hot metal, I felt all the joy that you was felt. Because I'm really looking forward to this moment myself! Sure like and sub! 🙏

You sir, are on your wzy to be co ing an artist, very best wishes for the future, bedt regards from a Kiwi living in Australia

Love the wind chime moments.