It's surprising that so many tiles guys don't seem to understand that all of these tile saws have adjustable tray rails in order to both align the tray with the saw blade AND to get any play or wobble out. If you have access wobble then the rails/tracks the tray rides on simply need to be spread out a little further from each other to snug up against the tray rollers. This will take 95% of the play out of the tray.

I took a gravity stand from an old table saw and modified it for my diamondback . I love it. And I put a tee in the water line with a valve and made a table sprayer as well. The diamondback is a very good saw... Very reliable. But yes it can be off a 1/16th on a rip. To stop that, adjust your rails, and when you cut, don't push into the Blade like a Normal cut . Instead unlock your plunge, and score the tile long ways( rip) and keep slowly applying pressure on the plunge sliding the table back and forth. Back and forth .Back and forth. Halfway into the depth of the cut it will snap . then clean up your edge . you will notice a huge difference in accuracy on a 24in rip.

Veo este video una y otra vez por la claridad en que nuestro amigo Landberg nos hace entender y diferenciar las características de una cortadora de mayólica. Gracias.

Don't know how you have so few subs. This is one of the best tile related channels on KZfaq.

the dewalt saw is pretty darn light..i dont like the saws with the stand attached, to bulky when washing, i much prefer a saw that has separate parts

Just bought. A delta cruzar 10 inches this video helps a lot All your videos help a lot

I recently bought the 7 delta cruzer. I've had my MK 100 for 15 years. I just wanted something that didnt weight 92 pounds up a flight of stairs sucks. I'm happy with the cruzer, but the stand makes it take up a lot of room in my van. The saw by itself is super light for someone to carry it anywhere. The gravity stand is convenient though and 1 man can still load and set up by yourself. I used to just set my saw up on my mud stand.

I'm stoked for the d36000s! Man oh man. The iq is nice, but we do a TON of miters. I still just prefer the beveling motor. The quality of the cuts with a good blade is fantastic. And water containment is great. If IQ could figure out a different stand and beveling motor we would jump on it. I think perhaps the biggest prop to dewalt was the taller stand. Doing this line of work is hard enough on the ol' back. Making repetitive, precision cuts was really hard on the back with the old saws. It's comfortable on the dewalt. Very anxious to see the updated saw though! Thanks for the content 🤙🤜

I bought the diamondback about 2 months ago, should've got the upgraded one or the delta. And instead of the back extension for back spray, they should have what husqvarna uses on their's with that end cap water catcher. And fast cap makes a chop shop saw hood you can put a bucket under to help with overspray containment and clean up

luv my 8"ridgid saw also got the 10" but use 8" more. both good saws for the cost👌. Thought about getting the 10" cruiser don't know at the moment

I'm looking to replace my dad's Target super tilematic saw with something similar. He probably has had 3 in the last 30 years but only replaced due to them being stolen because those things are beast and will outlive me.

Just finished my last job with my old saw. I think I'm going to pick up the 7" Cruzer this weekend based upon your reviews. I might skip the gravity stand since I'm 6'2" and the saw is a bit too low on the stand. Thanks for the comparisons.

Great presentation, I’m a DIY guy and you answered all my questions. Since I don’t do this for a living, battle over whether to buy the expensive, hopefully better made, feature rich unit, or will the “cheaper” unit work for my needs. I’m now a subscriber, thank you.

Good rundown of these machines. An IQ saw is in my near future. For my purposes it’s the 7” model first.

gotta love the diamondback!

Great comparion. Lers see a compasion on cutting blades

Yes, the dewalt is a pain in the ass to set up/take down for jobs. Also the tray ends up getting pretty loose overtime and can be off a whole 1/8th. The time varies on usage, we've bought one this past year and already has loose tray and sprayer setup isn't the best either. As a tile installer for a company that has 5 of these, I wish there was something better in this proce margin. My boss did just purchase a dry tile saw that seems alot better but I've yet to use it myself, so hopefully we switch out until dewalt comes out with something way better or a different company.

Hi, I have a wet saw. do you happen to know what can be done if it's difficult to push the table to cut the tile? There is a cylindrical rod and a track on it. I am guessing that the cylindrical rod is not allowing the table/tray to slide freely. Should I add some lubricant to allow it to slide easier, or is there anything else that can be done.

Thank you so much for your videos brother. I own my own remodeling company and I have my biggest job yet next month and I’m looking for a wet tile saw and this video made it so much easier for me. Thank you from Southern Renovated Homes.

Could you please tell me how did the 10” Diamondback has even holding up. I don’t see it in your new videos. I would really appreciate an update on the 10” Diamondback

I am completely new to all this is it good for stone? I will be doing a stone wall I was told wet saw would be best for stone and glass

what's the single room on the dewalt

Great video, very helpful. Really leaning towards the dewalt, but wish it was a 7" to avoid the 10" flex when shaving material. Do you know if the dewalt can use a 7" blade instead? Thanks

I'm in New Zealand and here it's not this wet saw , how i can to get this one , do you have some ideas?

Did you say Delta took over or bought out The Beast wet tile saw? I was in a tile store a couple days ago and they had a display up which I was sort of half-hearted telling the salesperson I sure like the way the Beast was made. That's when they said that The Beast was being discontinued, but never offered any additional information regarding reason or if plan to continue under a different manufacture (owner)? I have a 8" Rigid wet saw I have been thinking about upgrading in the future!

I would compare the dewalt, ridgid, diamondback (covers most house brands like master craft, they are the same) and maybe the rubi or husqvarna all 10"

I use the felker xl saw. Great saw. 20+ years working. Recently found it its been discontinued. Husqvarna is the name now. It's about 1500$. Maybe you can check that saw out in the future.

Well done.I have 4 saws.Have a hard time not using the dewalt for every job

I agree with you on the option of extending the legs that’s something I believe IQ should definitely put into their stand

How come we can’t buy these in the uk

dumb question (I'm used to work with wood), you put your hands where there is a 'don't put your hands here' sticker, is this safe? with a wood radial saw the wood can get stuck on the blade and pull your hands with it into the blade, this cannot happen here?

Could you do a review on the zoe150 saw

@lambergtiletv. Great video. I’m currently looking at saws. I set tile an average of 1-2 weeks a month so not quite full time but enough I need a good saw. My last job was a 15x30 polished porcelain that was 3/8” thick. Both saws I have really had a hard time with tiles that size. My question to you is. If you could only have a manual cutter and 1 saw which saw would you buy? Price not being a factor.

Thanks dude, I’m about to buy one stand wet saw and this video help me a lot Just because you talk about the high on IQ, Iwill get the Dewalt because I’m 6.2 😂

I’m 4’11. The height for me is great for the smaller ones lol. I think I liked the IQ. It’s a learning curve. But the de Walt is tempting

I have the dewalt and the iq saw love them both but they defintely have there time and place

big fan of the RIDGID,has adjustable legs too.

Thanks for the good news.

Do you HAVE to use the IQ blade on their saw? Or can you use standard blades as well?

He said the quality was the same? But did anyone see the glass cut on the IQ. It was horrible haha. Chips all over and while cutting kept chipping. I love the IQ but that cut was not good compared to the others.

Hey, I'm doing a hallway full bathroom this summer and a small master bath next summer. Is the 7" Diamondback or the Porter Cable PCE980 a better choice using 12 x 24 porcelain tile?

Which one of these would you say is the lightest? I do stone work and currently use the 7inch rigid wet tile saw without any water due to the extra weight when going up on scaffolds plus the it only lasted 6 months before it started falling apart. Would really like a much sturdier 10 inch saw but weight is a huge factor

Kick ass. Great song.

I'm curious to the longevity of the IQ blades?

Hey! Love your videos and your work in general! I also do tile installation (part-time) and got a Rubi dc250 saw. So far, I loved it, but I'd love your opinion on that one. Surely, if you have a chance. Thanks for professionalism you are showing and little details! Thank you for videos and God bless you in everywhere!

Great video thank!

Where you getting your pricing for the delta cruzer? Everywhere I've looked it's almost $1,000 for saw and gravity stand. I paid $1,200 for my lachmond beast 10" w/ gravity stand

i still use 20 year old big and small Target Tilematic saws

Do you think that the D24000 might have a price reduction after the D36000 is available? Great review.

How many inches is it between the left edge of the cutting blade and the vertical support for the motor. The clearance number has always given me grief

Please, which of these machines is better to cut glass bottles at an angle, vertical and crosswise? Which cutting disc to use?

Love my 10inch delta cruzer, better than my dads dewalt 10 inch

Easy to do miter on 24x48 on the orange saw ?

Nice presentation, nice tile saw, price? I wouldn't mind trying it. I have the Hogzilla of rigid and I'm not very happy with it it has paid for itself but I wouldn't mind getting a new one. Thanks for the videos.

Can you test the new model of the Kobalt 10" wet tile saw? It's different than the older Kobalt you reviewed.

How does the diamond blade hold up without water?

Was there any difference in cutting capacity between saws?

Easy to use

Hi ,I want to buy one this but I can't because I am in New Zealand.

I wish my Dewalt was that clean,😂😂

which one has less water splash on the floor?

I still have my dinosaur wets saw mk they last forever but to heavy I want something lighter

What would you recommend in a wet saw for larger tile?

No rigid? Also, are there any materials the IQ isn't good for? I can't see it being good for glass or small mosaics.

Is delta cruzer far superior to the diamondback?

I wou;ld like to know where you git that dewalt tile saw for $800.

I like Wandeli tile saws, but don't see anything similar on the American market. Have you ever seen one? Are we behind China and Europe? It can cut 48" tile in automatic mode and the price is probably just a couple of thousands.

I don't think I can finish this one bud, looks like you lined up an apple and 3 oranges

I’m just getting started I wanna try start my own tiling business I’m 20 years old as of writing this with little to no tiling experience, any tips?

The amazon price on the Delta is now almost $700. I was bummed.. finally had the money to buy one & was like, "what happened?"

Why did you use the 7" diamondback? it looks like the delta is small also. I know the diamondback has a full 10" I have one, mounted it to a ridgid gravity stand and works great. I've had the dewalt also

LOL loved how he walked back and fourth at the beginning so you could see every saw

Bro you should of compared all the tile cuts in one big picture with the names of the saws under the tiles

I remember that Diamondback 7" cutting a 4 FOOT hard porcelain plank and being off 1/16". That is outstanding in my mind.

Qurantined,let's make vids!😇👍

I was not impressed with the edges on the dry cut. Just sayin. When it chips the edges, it's not worth it.

Yeah but are the cutting capacities the same🤔

Is dewalt overkill for a homeowner?

The link to the Delta wet saw shows almost $625 with no stand. That's a far cry from $500 with a stand.

I own the IQ tile saw btw

Qep makes them to

i want 220v

What about the 8" Ridgid wet saw?

This worked great for redoing the shower/bathtub of my kid's bathroom. kzfaq.infoUgkxfiuHoZJo3bgdVPFRxQ-iqPpfbEHl2cYt I didn't like the guide, so I took it off. I just used a fine tipped sharpie on the tile and followed that line. It does make a wet mess, and once I started looking like I wet myself I started wearing a towel and apron while cutting. The blade it came with worked great until we wore it out. It was better than the replacement one we bought. I tried looking for just their blade, but failed. Not really for larger tiles unless you stack stuff on either side to support the tiles. Anyway, would definitley buy again.

Where's the husqvarna? Raimondi? Rubi? Target?

used the IQ working for a GC and lemme tell you the wheels are GARBAGE. used it about half a year and they damn near exploded and had to run to the depot for lawn mower wheels not to mention VERY heavy so if you have no helper its staying on the first floor or outside which honestly defeats the purpose of being waterless/dustless (still throws chips n dust btw)

I have bought a delta so i am going to try it, i do alots of comercial so i will se how much it lasts me 😂😂 lol hope alot

I bought this saw on his recommendation and it's not that great the pump will not stay put in the pan, the water to the blade is a joke, those adjustable water lines are apita ALWAYS HAVE TO MESS WITH THEM. I could see how a person would cut their finger constantly adjusting the water. The motor bogs down like it doesn't have enough power then it causes the water supply to slow down. He is correct it is loud and it will cut a straight line. But if I could send it back I would the water lines are enough to drive me nuts

"The IQ saw speeds up time." I think I"ll stay away from that one then.

Самая недорогая .

cut something

That's the crappy diamondback

ive got dewalt and fancy that iq look good got some large format 6mm 1meter square to cut any opinions