Bigger battery on Makita and it’s perfect

I’m onto my second one as no parts are available for this extractor in the uk, so not sure about the US. The second was through warranty so if I had to pay for it again, I would look at another brand. The bag storage ( base) of the unit isn’t deep enough to accommodate the entire bag capacity and the extraction is certainly not great, especially when cutting a few mm from stock. Dewalt let us down with this product

I use Milwaukee M18 chalking gun for Auto glass urethane, every day use and it's been 10 yrs I have it, I also got craftsman, great video man

Denatured alcohol in a spray bottle . Spray that after you run your bead , it dosnt allow silicone to smear to other unwanted surfaces . Dries in a minute or two with no residue . Learned that from commercial glass installers a few years back . Makes caulking a lot easier and cleaner

Nice bathroom! too bad You couldn't set the curb first and had tiled around it, and same thing with the bench/seat. I understand that underneath, the substrate is pitched, but it does help Kick out the water. And especially on either end of the curb, because we all know lots of problems happen there.

Doing the same exact thing in my home. This guy is awesome for making these vids! Always goes the extra mile to make the best design and tile work.

Landberg videos are just a little cooler than the rest...

What is that little grinder blade you using on outlets?

Extremely good step-by-step video, brother. Thanks a bunch.

Been watching your work for a few years now. It's great! I'd say less overhang on the bench seat next time... Everything else, perfect! 😊

Thanks for the tip on the miter for the bench

Like the corners, it didn't dull the corners out when you're pushing it through or it didn't separate the tile like it didn't make it. Go to you know a quarter inch more on one side. I would probably say that's better for more. Just the ceramic subway tile. I don't know man. Still not impressed. I only saw one cut

nice nice!

Alright. Hear me out. What if you install a nice bathroom. You were already paid 50% of the job. And when you go to collect final payment, the lady of the house offers her services. Do you: 1. Decline and expect full final payment or 2. Say YOLO and have yourself a nice little afternoon?

Damn cliffhangers! :)

Very good work💯

My 2000 generator turns off after 30 minutes with the AC and refer running 🤔😳.. you need to let it run more time to make sure it works

Quick question, why can't this be done with a cement backer board like permabase? I searched high and low for this answer and get conflicting results. My bathroom exterior wall is block here in Florida. Whoever laid the block did an uneven job, some blocks are recessed and others are protruding creating a wavy out of plumb wall when the furring strips are on. I ripped wood shims for the most part but would like to fill in some of the inconsistent spots with wet shims. Can this method be used for only certain areas? Thanks

It needs an adjustable depth stop

no water running during the cuts ?

Hi, after 5 years would you still recommend this product? I'm looking for small grinder to cut tiles for my DIY balcony tile project and also for grout removal.. which tool will do the best work for grout removal? Hacksaw with grout removal knife / multi tool with grout knife or this 3" grinder? Thanks!

no good

Do one of the best tile cutters in the market I always use the Rubi I want to switch

I bought it a couple months ago I love it 30 bucks using my battery choice and smoother than my corded

Болгаркой я быстрее вырежу .

Short and sweet, good content, thanks

Good job🎉🎉

With all that expensive tiling in the walls, why didn’t they just tile the tub? Roman tub?

Great review fun watch. Oddly enough 🤨

Do u have to have all the beams on at once?

it's a niche not a nitch

Very nice! But it is a niche, not a ni(t)che

Your reviews/demos are absolutely top-notch

❤How many kilograms of water pressure?

Hi, Is there supposed to be a grout gap at the back and corners of the nitch or do you apply sealant to the corners?

Hiii, I read on a trim spec sheet that Aluminium trim can corrode in wet areas. What is you experience with that? Just got to the end, the horizontal grout joints look pretty bad where they meet the trim. Probably not a great design of trim tbh.

Please put a wrench to that small grinder wheel to tighten it. You made my nuts run inside my body when you tightened it by hand. Only reason I say that because I seen them fly off twice when apprentices do that. Miracle nobody got hurt either time

So so many better options

I never thought of using a template for that I feel stupid😢

Would you recommend for a one off bathroom floor with mosaic tile?

Id rither a multi tool

Its called an impact driver for a reason,use a drill

Просто дорогая насадка которая не режет в ручную гораздо быстрей можно отпилить

Doesn't look like it cuts that well.

Sawzall

Neat, didn't know they made the variable speed cordless

Neat. You can switch the handle around you know? Makes it more natural for me to cut

Numbers are neat. I find they cut better if you go left instead

Where's the failure?

Nice... Like the original one that plumbers would have, but you needed a chucked drill or chuck att to the QC Impact. Now it's all in one with measurements. Knowledge, experience & correct tools. Recipe for a PRO!