Laser Cutting Nozzle | Problems and Solutions of Laser Cutting

Рет қаралды 13,752

2 жыл бұрын

Our Store/Nuestra Tienda: spierlaser.en.alibaba.com
Contact Us: +86-13335151833, clara@spierlaser.com
The video is related to the laser cutting nozzle, we talked about the nozzle usage, problems and solutions for the laser cutting operation.
For fiber laser cutting machine, the nozzle plays important role.
1: It collects the capacitance signal and transmits it to the signal processor through the ceramic ring, so as to keep the distance tracking of the laser head to the workpiece;
2: Guide the auxiliary gas to pass through;
3: Gas pressure is formed at the nozzle outlet to speed up the cutting, take away the slags, and protect the inner lenses of the cutting head.

Пікірлер: 35

@delwarhossain2977 Жыл бұрын

you are doing good job and it's help all of us

@ClaraChai Жыл бұрын

😀Please tell your friends I am here, thank you.

@Abdulbasit-di9cj 2 жыл бұрын

You doing great Job

@ClaraChai 2 жыл бұрын

Thank you

@abhilashkp9918 2 жыл бұрын

Hai madem, can you please explain how to set reference ponts for a nested pgm, and if I stop the cutting in the middle of the program, how can I come back to the starting point?, and how can I jump to the point where I click the stop button for resume the program? in MESSER system there is an option "jump to line number" but in Sypcut I am not aware about the process, can you please explain it?

@bogdanilietalmaciu7912 Жыл бұрын

Hello Clara! Please explain to us the logic behind the choice of nozzles. Depending on what exactly do we choose a certain nozzle? How do we know we've chosen the wrong nozzle? Thanks!

@ClaraChai Жыл бұрын

Could you find the answers from my nozzle videos?

@mohamedrezk5797 Жыл бұрын

❤😊

@fatiheltun2814 10 ай бұрын

Hii clara

@kenjiroryuki Жыл бұрын

hi carla, I have a problem with a 6000W laser machine with a Raytools BM114 type laser head. and cannot stably cut carbon steel plate above 14 mm thick. how much influence laser power with laser head type for good result?

@ClaraChai Жыл бұрын

I think 14mm is not so thick for 6kw, probably it is parameter setting a or some other factors.

@osdarproanio8051 5 ай бұрын

Hi Clara, I wanted to know if it has happened to you that I cut at high speeds over 250mm/s and sometimes the center moves and the cut comes out wrong as if it were off center.

@ClaraChai 5 ай бұрын

The center means the nozzle center? I think you could get something from membership videos.

@jacquesbezuidenhout3606 3 ай бұрын

Hello I have one very important question please help whe bought a gf 1530jh Fibre laser machine golden laser and sometime whene I cutt it just like dry cut it's cutting but no sparks dry cut and the laser source alarm comes ons shutter closes and does not whant to open

@ClaraChai 3 ай бұрын

I am not sure I could get all. Since it is important, have you tried to contact your supplier?

@___-ws5lm 9 ай бұрын

Привет из России. спасибо за канал

@ClaraChai 9 ай бұрын

Glad you like it.

@rodgerdodger7753 2 жыл бұрын

Which nozzle is best for cutting 2mm carbon steel with gas

@ClaraChai 2 жыл бұрын

1.2 or 1.5 double

@user-js3tg2dd9e 11 ай бұрын

hi, I cut in a common cut it is 5 hours program but the light is off and my machine is shut down what is the option to continue cutting as the last stop I know PT CONT. option is available but sometimes it doesn't active so give me a second option.

@ClaraChai 11 ай бұрын

'Task' could be a little helping.

@durgvijaykumar7074 2 жыл бұрын

Hello mam...

@night_grinder1378 Жыл бұрын

Good evening. For my laser machine I always encounter overheating problem every 30mins. Im using air cutting only for 2mm. Power of my laser was 2kw. What should be the problem ? Thank you in advance.

@ClaraChai Жыл бұрын

What kind of heating? Nozzle heating? If it is nozzle, you can check a short last month.

@night_grinder1378 Жыл бұрын

@@ClaraChai the cutting head itself