Laser Engraving and Cutting with LaserGRBL software

Рет қаралды 96,195

Күн бұрын

In this video, I am going to show you how to use third party software called LaserGRBL to engrave and cut with your NEJE Master machine.
My Blog where you can find content related to Laser Machines and Engravings as well as free 3d accessories, testing templates and projects for your laser engraver :
whathowwhysolution.com/laser-...
Machines:
Latest Laser Engraver and 3D Printer Offers affiliate.geekbuying.com/gkba...
Atomstack
Official - All machines
P7 & P9 s.click.aliexpress.com/e/_DCr...
A5 s.click.aliexpress.com/e/_DeE...
A10 s.click.aliexpress.com/e/_Dml...
X20 s.click.aliexpress.com/e/_Dd0...
X30 33W Laser s.click.aliexpress.com/e/_DDP...
Amazon
amzn.to/3OqnGLF
amzn.to/3ERIQiY
amzn.to/3OrnZG0
Aufero & Ortur
Laser 1 s.zbanx.com/r/7ONL70JFNkci
Laser 2 s.zbanx.com/r/8BshexpB5gsN
Laser Master 2 Pro s.click.aliexpress.com/e/_DkA...
Laser Master 3 s.click.aliexpress.com/e/_DDk...
LU2-4-SFLaser module s.zbanx.com/r/tnuGpccNPxBi
LU2-4-LF Laser module s.zbanx.com/r/QOp6rfiVguw6
Amazon
amzn.to/3TVw9rz
amzn.to/3tQfA5Q
NEJE
Official - All Machines shareasale.com/u.cfm?d=886868...
NEJE 3 PRO s.click.aliexpress.com/e/_9waC1r
NEJE 3 MAX s.click.aliexpress.com/e/_9ynf3X
Amazon
amzn.to/3AA5cTj
XTOOL
Official - All Machines
EU: eu.xtool.com/?ref=MRW&...
USA: www.xtool.com/?ref=MRW&...
D1 amzn.to/3ERfAIM
D1 PRO amzn.to/3AA5cTj
XTOOL RA2 PRO Rotary amzn.to/3AyWiFB
Longer Ray 5W & 10W
s.click.aliexpress.com/e/_Dej...
Amazon
amzn.to/3TSZCSL
amzn.to/3OsnYC4
Other Brands
Comgo Z1 s.zbanx.com/r/369OUFEJ2Tun
Atezr P20 Plus amzn.to/3UWSTIV
LaserPecker 2
s.click.aliexpress.com/e/_Dd6...
amzn.to/3VjRWKJ
OMTech CO2 Laser amzn.to/3Vd053p
Sculpfun S9 amzn.to/3ERfAIM
K40 CO2 Laser s.click.aliexpress.com/e/_DmW...
Accessory:
Ortur Rotary Roller s.zbanx.com/r/KEvEr5qpnB6X
Offline Controller s.zbanx.com/r/H7Qfwt9eiJO3
Aufero Laser Height Adjustment s.zbanx.com/r/tl634XxCxKsg
XTOOL RA2 PRO Roller s.click.aliexpress.com/e/_DlL...
Atomstack Roller: s.click.aliexpress.com/e/_DeM...
Atomstack Extension: s.click.aliexpress.com/e/_DBA...
See Also:
Regain lost power with your laser module
• How to regain Power in...
Setup Stubborn Laser Engravers
• Setup Stubborn Laser E...
Cutting acrylic with your Laser Engraver
• Cutting Acrylic with y...
Atomstack P9 initial thought and setup - Should you buy it?
• Atomstack P9 - Initial...
Engrave Projects bigger than your engraving machine
• Engrave and Cut Projec...
Aufero Laser 2 by Ortur - Setup and Testing
• Aufero Laser 2 - Ortu...
Aufero Laser 2 vs Neje Maser 2s Series
• Aufero Laser 2 VS NEJE...
LaserGRBL In-Depth Tutorial
Part 1 [Interface and Control Plus Engraving]: • LaserGRBL In Depth Tut...
Part 2 [Open, Append & Save gcode files + Hint]: • LaserGRBL In Depth Tut...
Part 3 [Work with Image Files]: • LaserGRBL In-Depth Tut...
Part 4 [Work with SVG + Trick]: • LaserGRBL In-Depth Tut...
Part 5 [Advance features and GRBL config]: • LaserGRBL In-Depth Tut...
What is Kerf? How to Find the Fit tolerance for a perfect Joint
• Find the perfect Fit T...
Machine Anatomy - Parts and Working Principle
• Parts and Working Prin...
How to cut large sheets
• Cut Large Sheets of Pl...
How to test your machine and materials in one Go
• Test your Laser Machin...
Safely home your axis
• Safely home your laser...
How to cut Leather
• Can you Cut Leather wi...
What is G-code
• What is G code
Laser Problem
• Laser Flashing Problem...
Can you engrave Metals?
• Can you Engrave Metals...
Upgrade the Neje Master with the 40W Dual Laser Module
• Neje Master Upgrade -...
Automate Layering in LightBurn using Inkscape or Autocad
• Automate layering in L...
How to engrave custom fonts with the Neje Desktop App
• How to Engrave Custom ...
See Also the in-depth tutorial of Neje Desktop App
• Neje Desktop Applicati...
Resources:
LaserGRBL
lasergrbl.com/download/
Timestamp:
00:00 Start
Foreword 00:27
Download and Install Laser GRBL 02:35
Overview of Interface 03:12
Load a project (.gcode) 05:10
Setting up the reference point 06:55
Machine Home vs LaserGRBL Home 08:00
Load a project (.png) 10:05
Adjust all the parameters of your project 10:40
Power settings 13:05
Engraving 16:08
Load a project - Photos (.jpg) 16:35
Conclusions 18:45
Thanks for watching

Пікірлер: 75

@Scottsman31 Жыл бұрын

i love your videos ive learned alot i just got a neje3 plus yesterday and its alot to process thanks again apreciate your content

@joelrob8606 7 ай бұрын

Bonjour de France et GRAND MERCI MERCI 💪💪 pour vos vidéos.

@DaAndyGaming 2 жыл бұрын

this is a very good video!!! lernd a lot thanks

@quillmaurer6563 Жыл бұрын

Question - possibly one of those questions too stupid for anyone to answer: How do you tell it which preset from the material database you want to run? This video doesn't show that, and I've scoured the internet and dug through every menu trying to find that, not finding anything. How do you select say "Hardwood - cut" or "leather - engrave"?

@AussieKillerD 29 күн бұрын

nice one thankyou !

@user-lm7pu6rt9q 6 ай бұрын

What type of woods do best for images, thank you

@jabbarhajiyev3052 2 жыл бұрын

hello. could you tell me how to create a file with an engraving inside and cut the edges (in coreldraw)?

@pitapinup Жыл бұрын

This is what I am trying to do as well

@shebibawaasadbawa9221 2 жыл бұрын

Hi there what are the best setting for neje master 2 40w to engrave on the wood 3 mm deep with out burning it too much because every time I try it burns my engraving area more then it should witch takes away real color of the wood

@MiddleRoomWorkshop 2 жыл бұрын

Hello Shebibawa asadbawa, thank you for your comment. That is deep engraving and honestly engraving so deep especially if it is scanning type will make lots of smoke and burn the surrounding. In my experience with and testing power above 70% and speeds below 800mm/min will create a big mess (see my testing with the 40W module here kzfaq.info/get/bejne/rrl9lrN3u5uod40.html) So far between 60% and 70% power with a speed of about 1000 to 1200 mm/min produces the best engraving effect with not much discolouring, but not as deep as you wish to go. The things that I could suggest is to reduce the fill quality or the lines/mm if you are using LaserGRBL (increase the interval if you are using Lightburn) this with some tradeoff will make cleaner jobs, also air assist will help a lot in reducing the burning around, but if you do not have one just put a blower or a fan blowing across the laser while it engraves. If the Engraving is a gcode type, meaning outlines then you can try with some masking tape in the are to engrave which you will then remove once the job is completed. I hope it helps. Ciao

@casper1240 Жыл бұрын

Silly question probably but how do i engrave a few words on 50 mill thick wood for a project im doing .can i convert a word file into a laser supported file vector etc ? thanks im complete Newbie

@RestoreTechnique Жыл бұрын

How do I cut a single straight line? I want to cut some things in half. If I vectorize it will cut a 2 dimensional shape, x axis and y axis. If i dont vectorize, it will cut side to side with a big kerf. Currently I have to import a rectangle, vectorize, and stop the burn after it's done the first line. Is there a way to just cut a single straight line?

@MiddleRoomWorkshop Жыл бұрын

Hi, Restore Technique; thank you for your comment. What software do you use for the vector? If you use Inkscape, draw a line in the direction you want using the Draw Bezier Curves and Straight Line tool, save the file and open it directly in LaserGRBL. LaserGRBL can read .svg as long as the drawings are paths. Once you open the file LaserGRBL will prompt you to set the speed and the power. kzfaq.info/get/bejne/q8x3p6dkxLTSdoE.html Otherwise, for such a simple task, you can write a simple gcode: Open a new notepad and write: G90 M03 Sval G01 Xval Yval Fval M02 Replace the val with the actual value; your laser's power goes where S is and corresponds to the power you want time 10. for example, say you want to cut a 250mm vertical straight line. G90 M03 S900 G01 X0 Y250 F200 M02 The above will run your laser with 90% power at 200mm/min. Save the file in .nc format and open it with LaserGRBL. Here jog to set your custom origin, frame to check all is good and run. Let me know. Ciao and Happy New Year

@Laserwurks 2 жыл бұрын

can we load a different firmware in NEJE to keep the power off the laser when its not doing anything

@MiddleRoomWorkshop 2 жыл бұрын

Hello usasolarwindinc, thank you for your comment. Unfortunately, that is not possible, I know that is pointless and wasting of energy, but NEJE hasn't thought about it. All you can do is to power down the machine withing engravings. Ciao

@JosemartiRodriguez 3 жыл бұрын

Hi. I can't engrave nothing with it. I downloaded and installed. The software starts fine, I can control manually my NEJE 2S 30W (same as yours), but I opened a simple *.nc and does not work. May you suggest something. Any missing setting perhaps?

@MiddleRoomWorkshop 3 жыл бұрын

Hello Josemarti Rodriguez, thank you for your comment. I believe there is not driver difference within the NEJE 2S and the 2S Plus, therefore the software seems not willing to compile the job. I can suggest you to try with another G-Code format. Have you tried to use the J Tech Photonics Extension on Inkscape? If you haven't I have a video for that kzfaq.info/get/bejne/mq53pMeIppyRdmg.html you can try to export your project with this extension which will produce a .gcode file that work also without problems. Let me know Ciao

@PichondeDragon 2 жыл бұрын

Hola Josemarti Rodriguez, seguramente ya solucionaste tu inconveniente. Para los que les pasó lo mismo que a nosotros los que tenemos el Neje 2S Plus, sugiero lo siguiente: correr el archivo neje-grbl-uploader_v3.4.exe, que encontré en el sitio de wiki.nejetool.com .Es muy intuitivo y ayuda a identificar el puerto y el valor de BAUD de tu unidad NEJE y luego abres el Laser GRBL y listo! Saludos y ojalá les sea útil

@nenadlelek581 Жыл бұрын

Could you give me the advice regarding the distance of the laser from the surface we engrave or cut (from the bottom)?

@MiddleRoomWorkshop Жыл бұрын

Hi, Nenad Lelek; thank you for your comment. The laser height depends on the laser module you are using and the material's thickness if you are cutting. The simple way to find the height is with a ramp test which I cover in an old video here: kzfaq.info/get/bejne/fbqle5VoyprPh4E.html Let me know if you need some more assistance. Ciao

@tomaszwasinski2816 2 жыл бұрын

Hello, I have neje master 2 7W, the machine connects to the grbl, but the laser does not work with the M03 command, help me please

@MiddleRoomWorkshop 2 жыл бұрын

Hello Tomasz, thank you for your comment. That is interesting, in a laser machine you can use either M03 or M04 where M03 stands for constant power, while the M04 stands for dynamic power. In my experience and knowledge, older machines do not recognize M04 but all of them should work with M03. Can you tell me which software are you using to generate your Gcode, and have you seen the Gcode itself? If you are using JTP extension with Inkscape then you are prompted to choose between M03 and M04 so you could try the latter, but I believe the issue is the power settings, try to open the exported Gcode with the notepad and check if next to M03 you have S followed by some number (e.g., M03 S55). If you import an image instead laserGRBL will ask you which command to use and so you can try both. From there we can debug further. Let me know. Ciao

@David-we5fg 2 жыл бұрын

hello, i have one neje master 2 mini i cant make the program to connect to the machine can you help?

@MiddleRoomWorkshop 2 жыл бұрын

Hello David, thank you for your comment. If the machine does connect to the native software from neje, then try on switching the port on the top left corner where it said COM before clicking connect. Another thing, to connect with any software, you need to make sure that other software are correctly closed. You can check if the NEJE Application is running in the background looking at the Task Manager. Let me know. Ciao

@jujucattys156 2 жыл бұрын

Hi m8 plz can u help I’m trying to engrave on to the back of a mirror so it will show thru to the frunt but I’m having trouble geting it to come thru if you get me wood u show me how to set up in lasergrl to do the job I’m using a vevor 30x40 5w blue laser

@MiddleRoomWorkshop 2 жыл бұрын

Hello JUJU CATTYS, thank you for your comment. I can plan a video for mirror engraving but it won't be uploaded soon. I have an entire series on LaserGRBL tutorial (kzfaq.info/get/bejne/braYftyLztapaXk.html) showing how to work with the software, but I think the problem here is to actually set up the mirror for engraving (kzfaq.info/get/bejne/qciXZ8iamcumomg.html). You should engrave the mirror upside down, i.e. the reflective side facing down and to engrave your project mirrored, that means flipped about its vertical axis. This should ensure success, but take a precaution to protect the working space because once the laser makes it through the reflective layer (which should be upside down) will burn the next absorbing surface, so if you place the glass onto a table, the table may get burned. Let me know how it goes? Ciao

@paulprs9703 Жыл бұрын

Hello thanks for the tutorial its so helpful, but I do have an issue that I wondered if you had any idea why, for some reason when I use the framing button its going from corner to corner instead of framing my work its only recently started doing it not sure why, its worked fine before. Thanks Paul

@MiddleRoomWorkshop Жыл бұрын

Hi, Paul PRS; thank you for your comment. I am not sure to understand it. When you click on the frame the machine should go through the four corners of the bounding box enveloping your project. So, taking as an example a random shape, the software will evaluate the lowest-most, upper-most, left-most and right-most points and make respective horizontal and vertical lines which will create a rectangle, aka bounding box. The framing command will tell the machine to frame that rectangle starting, for example, from the lower-left corner counterclockwise or clockwise to the lower-right, upper-right, upper-left and back to the lower-left. The software cannot trace the outline of the project, although that would be great. Let me know exactly what you are experiencing. Ciao

@paulprs9703 Жыл бұрын

@@MiddleRoomWorkshop Hi thanks for replying, not sure how its happened but it has corrected it,s self now, you are it was doing that originally then for some reason it just going across from one corner to another thanjs fir taking the time to reply great channel by the way, Paul

@MiddleRoomWorkshop Жыл бұрын

Hi, Paul PRS, I am glad you solved the trouble with your machine. Happy engraving Ciao

@elevenyes8679 2 жыл бұрын

does this software work on NEJE DK-8-Kz 1000mw laser engraving machine.

@MiddleRoomWorkshop 2 жыл бұрын

Hello ElevenYes, thank you for your comment. I cannot give you a certain answer as I haven't had such machine, but laserGRBL is a universal 2D CNC control software and works pretty much with any laser engraver and router. Ciao

@vicsdiyprojects4585 2 жыл бұрын

Hi I have vevor 5500mw laser engraver. Did u know how can I engraver on a wine glass and what power and speed ?thank you

@MiddleRoomWorkshop 2 жыл бұрын

Hi Vic's DIY projects; thank you for your comment. Engraving glass is not easy, and you need a trick for it; below, you can see two of my videos showing you how to do that. As for the power I normally use a NEJE A40640 Laser Module with an output power of about 10W, and the settings are as follows: Power 90%, Speed 500mm/min, Line spacing 0.12mm With my Aufero LU2-4-SF and other 5.5w laser modules, I achieve similar results with: Power 95%, Speed 400mm/min, Line spacing 0.12mm You should go to the second set of parameters in your specific case. The important is that you are in focus. kzfaq.info/get/bejne/oMCnnrKmlremoJc.html kzfaq.info/get/bejne/qciXZ8iamcumomg.html Let me know Ciao

@biancavezelici242 2 жыл бұрын

Hi, do you know what the power setting for scoring is? Thankyou.

@MiddleRoomWorkshop 2 жыл бұрын

Hello Bianca Vezelici, thank you for your comment. Manufacturers usually provide some indicative sheets which you can get the parameters from, but the best way is to test, each material has many variations, and you might get a different thermal response. If you tell me what material and thickness you trying to score (I guess you mean engrave) I may give you some numbers. Let me know, Ciao

@melenchit 2 жыл бұрын

@@MiddleRoomWorkshop Hello, can you give me some advice for the numbers, I try to cut 2.5mm plywood with atomstack x7 extra thin. Thanks in advance.

@tahajawaid1125 2 жыл бұрын

Which version of grbl are you using?

@MiddleRoomWorkshop 2 жыл бұрын

Hello Taha Jawaid, thank you for your comment. I am currently working with Version 4.3.0. Ciao

@peterdrienovsky Жыл бұрын

HI, i have a big problem, i cannot initiate my device in neje software.. it says.. homing failed, what can i do with this? a try to google an answer but.. any advice please?

@MiddleRoomWorkshop Жыл бұрын

Hi, Peter Drienovsky; thank you for your comment. What series are you facing the issue with? 2 or 3? Does the machine move when attempting to home? Have you tried any other software? As the first thing, I would suggest updating the driver, which can be found at Neje's Wiki Site wiki.nejetool.com/doku.php If this does not work, try reinstalling the software altogether. If the problem persists we need to dig dipper into the issue. Let me know. Ciao

@cristtiangonzalez1365 2 жыл бұрын

How can I set passes? Very good video by the way

@MiddleRoomWorkshop 2 жыл бұрын

Hello Cristtian Gonzalez, thank you for your comment. LaserGRBL takes in raw gcode and you can set the number of passes in two different ways; Through the JTP Extension in Inkscape during export, or in the latest updates in the small counter next to the progress bar on the top left corner. Note, set the passes to 1 in the JTP extension if you want to set the passes within LaserGRBL Software Ciao

@Aliambarek 3 жыл бұрын

Hi I want to cut 2mm plywood but it doesn't cut. Neje master 2

@MiddleRoomWorkshop 3 жыл бұрын

Hello Morad Ali, thank you for your comment. I haven't been working with 2mm Playwood. For 3mm thick one I set the module at 42mm height from the sheet 3 passes at 100% Power and 10ms Burning time. You can have a look to my latest video to see how you can find the right height/focus to have a clean cut. kzfaq.info/get/bejne/fbqle5VoyprPh4E.html Ciao

@emanmohammedali5203 2 жыл бұрын

Hi ,, can you please help with the code for the frame button ,, thank you

@MiddleRoomWorkshop 2 жыл бұрын

Hello Eman Mohammed Ali, thank you for your comment. I am not sure to understand your question. If you refer to the snippet of G-code that the "frame" button generates, that depends on where the local and global reference system is in your project, i.e. x and y values can vary. When you click the button the software takes the module to the custom reference system, then it throws bunch of linear interpolation G1 that will outline the project. Ciao

@barsmaden6921 3 ай бұрын

İyi günler lasergrbl kesim yaparken otomatik 2 kez geçmek nasıl yapılır

@MiddleRoomWorkshop 3 ай бұрын

Merhaba, yorumunuz için teşekkürler. Birden çok kez geçiş yapmak için sol üstteki ilerleme çubuğunun yanındaki alana sayıyı girin. Senin durumunda tip 2. MERHABA

@kymedramail Жыл бұрын

Can I engrave metal on the grbl ?

@MiddleRoomWorkshop Жыл бұрын

Hi, KARLA VELASQUEZ REALTOR; thank you for your comment. The material you can engrave does not depend on the software but on your Machine, specifically the Laser Module that comes with it. You can generally engrave (etch) metals with modules starting from 5w of optical powers. I can give you some parameters if you tell me what machine you have or its power. I hope it helps Ciao

@jwwilson1961 2 жыл бұрын

Lasergrbl doesn't do portraits on my cnc-3018pro as you stated. Everything I tried failed to produce a decent portait.

@MiddleRoomWorkshop 2 жыл бұрын

Hello jwwilson1961; thank you for your feedback. I am sorry to hear that. I thought you were asking for a typical desktop Laser Engraver, in particular NEJE, not for a CNC. Do you have a Laser Mounted into your 3018pro i.e., are you trying to laser engrave? If so, we need to ensure that the GRBL configuration is correctly set? Can you tell me what exactly does not produce a decent portrait? After manipulating your image, do you see the approximate output in your canvas? Is the engraving too dark or light? I can try to troubleshoot if you are more precise with the issue you are running into. Ciao

@jwwilson1961 2 жыл бұрын

@@MiddleRoomWorkshop I used Inkscape to provide a greyscale image of my brother who hobbies with me. The Raster image shows a good image. If I do line to line or with dots, horizontal, vertical, or diagonally the image is always to dark or to light. I cannot make out the texture of the hair and never make out the facial characteristics. I just purchased the NEJE 3 MAX . I returned the Universal engraver 15000 40" x 40" unit . It never worked when it arrived from their warehouse in New York and still to this day have not sent a replacement laser for the one that never worked. I'm practicing on the NEJE 3 Max and their program. I have yet to try a portrait on wood. I still have to mount the unit to a piece of wood as it does move. I tried a portrait on a piece of cardboard. Poor choice to burn with movement as well. If this was chemistry I wouldn't have a problem. This is new to me but it will be a great addition to our Shapeoko 3 cnc router. Thank you for your reply. John Wilson

@jwwilson1961 2 жыл бұрын

I cannot send a picture of the results of the Lasergrbl sample on this system.

@MiddleRoomWorkshop 2 жыл бұрын

Hello jwwilson1961, thank you for your feedback. It seems the issue is related to the file setup. Too dark or light may be the power setting given for the engraving; if you are using the NEJE desktop up, unfortunately, it is very limited and uses a different engraving approach; I would recommend you use LaserGRBL so we can have more control over the image. In LaserGRBL, once you load the image, which does not need to be preprocessed i.e., you can load it in the software directly, once loaded and setting up the parameters, if you use LineToLine tracing, be aware that your laser must support laser modulation (which I believe it does) try to check if PWM is active in the settings GRBL > Settings > Raster import > "Support PWM", also when loading the image at the "Targett Image" Window (the last one) under Laser Mode select M4. Additionally, since you are facing the issue with the diether option, check that the size is reasonable for the quality of the image you are loading; you can check "auto" under "image size and position" in the "Target Image" window and pull the data from the file using the EXIF button, then accordingly the quality or Line per mm must be reasonable, most lasers produce a spot of about 0.1mm in the vertical direction, therefore do not use more than 10line/mm. As per material, the use of line to line tracing implies power modulation as mention earlier, therefore you need a material that has a good linear thermal response to the heat. Cartoon is not very good at it. I normally use Diether or another kind of algorithms based dithering which respond well with any materials. Let me know if it helped. If you want to send me something to check you can email me at: info@whathowwhysolution.com Ciao

@jwwilson1961 2 жыл бұрын

@@MiddleRoomWorkshop Thank you. I will try your recommendations. Did you say that portraits can be loaded directly to Lasergrbl? You don't have to prepare them first in Inkscape or other programs?

@atamnirbharbharat4615 Жыл бұрын

where is link for laser GRBL software

@MiddleRoomWorkshop Жыл бұрын

Hi AtamNirbhar bharat, thank you for your comment. The link is in the video description, but I am pasting it here. lasergrbl.com/ Ciao

@elizabethfurlong1902 Жыл бұрын

I'm new was wondering how do I just to text

@MiddleRoomWorkshop Жыл бұрын

Hi, @elizabethfurlong1902; thank you for your comment. Unfortunately, LaserGRBL does not have a built-in designing tool, not even for simple text. For a text, you need to design it in some vector software like Inkscape, then either export a png and work it as png, or convert it into a path and either import the file as SVG, but is only for the outline or convert it into a Gcode with some plugin. kzfaq.info/get/bejne/ittka6lk0Ky6YZc.html kzfaq.info/get/bejne/q8x3p6dkxLTSdoE.html I hope it helps. Ciao

@renderuthis Жыл бұрын

whats a "step"

@pedrosacchetti3446 Жыл бұрын

and cutting???

@MiddleRoomWorkshop Жыл бұрын

Hi, Pedro Sacchetti; thank you for your comment. The difference between engraving and cutting is in the parameters you set on the exporting page. If you need to cut, you'll need to use a high value of power and a low value of speed, say 80 or 90% power and 200 or 250mm/min speed. It is not an option that you can select. I hope it helps

@b.w.oostdam8875 4 ай бұрын

There is no cutting in the video. Only engraving... Why does nobody do a proper video on a cutting workflow ?

@MiddleRoomWorkshop 3 ай бұрын

Hi, thank you for your comment. This is a quite old video discussing the workflow, I have a newer video showing the engraving and cutting. kzfaq.info/get/bejne/icyAoamlvbvFdqM.html I hope it helps Ciao

@bentebrunsvelt319 2 жыл бұрын

Good but sound not good👍🇳🇱😯☹

@possummanrld Жыл бұрын

I did not see anything about cutting, here.

@MiddleRoomWorkshop Жыл бұрын

Hi, Ron D; thank you for your comment. There is no difference between cutting and engraving from the software standpoint; it all depends on the power and speed settings you set for your machine. The higher the power and lower the speed the deeper you go. I hope it helps Ciao

@rondoring4964 Жыл бұрын

@@MiddleRoomWorkshop, thanks for the clarification!