Laser Engraving (Real) Leather Hat Patches: Step-by-Step Guide 2023

Рет қаралды 24,030

Күн бұрын

In this episode, we will go over my step-by-step process on how to laser-cut and engrave real leather patches for hats. We will also show you how to add the strongest adhesive to the back of the leather and show you how to apply the patch to the hat!! A true step-by-step guide on how it is done. Links below to all the products I used in this guide!
VEVOR ( HEAT ) PRESS LINKS:
VEVOR Heat Press Machine can be found here: s.vevor.com/bfQsQV
Other Heat Press Machine's options: s.vevor.com/bfQwOB
VEVOR HAT PRESS
s.vevor.com/bfQTdj
Leather Adhesive: Seriously The Best!
Lonestar Adhesive 25" wide: lonestaradhesive.com/products...
Lonestar Adhesive 12" wide: lonestaradhesive.com/products...
Where I Get My Leather: www.hidehouse.com/
Best Leather Oil For Veg-tan Leather: amzn.to/48B2fkL
Add Saddle Tan Color to Your Vegtan (color it that popular leather color) Here you go! amzn.to/3RFTUqc
I recommend 2-3oz thickness on veg-tan leather.
WHERE I GET BLANKS CAPS IN BULK: ottocap.com/
Additional Tools:
Teflon Heat Sheet: amzn.to/3ESJLie
Silicone Heat Mat: amzn.to/4690HwS
JOHNSON PLASTICS PLUS ACRYLIC AND JOURNAL SUPPLY
USE CODE 15% OFF ALL JPP PRODUCTS “ID5-4NB” DO IT!!
✔JOURNAL USED IN THIS VIDEO: www.jpplus.com/saddle-collect...
✔ACRYLIC USED TO MAKE STAMPS 6mm: www.jpplus.com/translucent-ca...
Timeline:
0:00 Intro
0:41 Leather and Lone Star Adhesive Overview
1:09 Where I Get My Leather
1:52 Vevor Heat Press Overview
3:07 Hot to Combine Leather and Lone Star Adhesive with Vevor Heat Press
5:17 Closer Look at Adhered Leather and Adhesive
6:01 Adobe Engraving Tutorial Shoutout
6:15 Laser Engraving Patches
6:40 Using the Hat Press with the Patches
10:56 Final Results
11:36 Outro
More Links!
✅Looking for 1 on 1 Private Laser Engraving Consultation With Yours Truly?
www.sonomalaserengraving.com/...
🍩www.buymeacoffee.com/laser911
👌Must Have Tools For Any Laser Engraving Business 🥓
Laser Glasses: For Fiber Laser amzn.to/2CKdrBi
Scotch Blue Tape: amzn.to/2NzEIZn
Weeding Tool: amzn.to/2Vgrfdd
Spray Paint Clear: amzn.to/2YBOxwk
F Clamp Vice: amzn.to/2Vlllr3
Brilliance Laser Ink: amzn.to/2YCcpQh
Decimal Ruler: Machinist Ruler amzn.to/2VlySyO
Data Vac Blower: amzn.to/2ZblxdM
Pana Vice: amzn.to/2BKyCm1
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com.

Пікірлер: 178

@VinnysProjects 9 ай бұрын

Here's a tip: put the patch in a paper towel or TP roll for a few mins to shape it to the hat. It'll sit perfectly on the hat and not move when you put the cover sheet over it.

@LaserEngraving911 9 ай бұрын

Love it! Thanks!

@gloria6508 4 ай бұрын

In a damp/wet paper towel?

@VinnysProjects 4 ай бұрын

@@gloria6508 no, just the cardboard tube. No moisture needed.

@gloria6508 4 ай бұрын

@@VinnysProjects Thank you kindly.

@laserengraverireland Ай бұрын

Top class videos, as I am just starting out with my laser, your videos are so helpful, thank you, Howard

@LaserEngraving911 Ай бұрын

Thanks glad you are liking them!!

@carlosgarcia6361 9 ай бұрын

Thanks for the video is quick and to the point.

@thenuttybowler 9 ай бұрын

Great video. Been looking at expanding with leather patchwork and hats and this just sold me. Love it.

@namegoeshere6923 9 ай бұрын

Your assistant is the best!!!!

@LaserEngraving911 9 ай бұрын

She's great!

@drasus233 8 ай бұрын

Awesome video!

@LaserEngraving911 8 ай бұрын

Thanks for the visit!

@denbig1 9 ай бұрын

Finally, a good hat video

@johnnyspropshop 9 ай бұрын

Very cool, thanks for sharing. Always enjoy you videos.

@LaserEngraving911 9 ай бұрын

Glad you like them! Thank You!

@clairemunley7460 Ай бұрын

So informative! Thank you!

@LaserEngraving911 Ай бұрын

Your so welcome! 🐱‍👤

@miketipan4906 7 ай бұрын

Great video!

@LaserEngraving911 7 ай бұрын

Thanks Mike! appreciate you! Thanks for watching!

@LowLos59 9 ай бұрын

Yes! Hats!

@CrazyKatOutfitters 9 ай бұрын

Love your videos! Always learn so much. Thank you!

@LaserEngraving911 9 ай бұрын

Thank You!!

@bigsargespeaks7384 9 ай бұрын

Awesome video! Been waiting on a video like this!!

@LaserEngraving911 9 ай бұрын

More to come!

@deejohnson5637 9 ай бұрын

Thank you very much for your Video

@LaserEngraving911 9 ай бұрын

Thanks for your support!

@ramonhidalgo8377 7 ай бұрын

Awesome video!! Will help enormously!!

@LaserEngraving911 7 ай бұрын

Glad to hear it!

@JeffHartman 9 ай бұрын

That is awesome. Can't wait to give this a try. Thanks for sharing.

@LaserEngraving911 9 ай бұрын

Have fun! Let us know how it goes!

@keithcopeland3412 8 ай бұрын

Great Video

@LaserEngraving911 8 ай бұрын

Glad you enjoyed it

@richardalves-cd5me 9 ай бұрын

Love the work thanks for all the tips!!

@LaserEngraving911 9 ай бұрын

My pleasure!

@captainmurphy66 3 ай бұрын

I'm really enjoying your videos. Thanks for the information

@brianroberts1605 9 ай бұрын

Thank you for sharing the video and all of the resources!

@LaserEngraving911 9 ай бұрын

Sure thing!

@joeb2147 9 ай бұрын

Answered a lot of questions I've had about heat presses. Thanks for the video.

@LaserEngraving911 9 ай бұрын

Glad to help, Thanks for watching!

@hollyverbridge9676 9 ай бұрын

Thanks of the informative video. Love that you started with the source of your materials.

@LaserEngraving911 9 ай бұрын

Of course!!

@user-ip5so5qp4i 7 ай бұрын

This is so helpful, thank you!!

@LaserEngraving911 7 ай бұрын

You're so welcome!

@bcurtis1612 8 ай бұрын

Great informative video! Thank you.

@LaserEngraving911 8 ай бұрын

Glad you enjoyed it!

@rotorrabbitfpv 8 ай бұрын

Awesome video! So detailed and really gives nice step by dtrr we p instructions.

@akantola2323 8 ай бұрын

Thanks a bunch!

@LaserEngraving911 8 ай бұрын

You're welcome! glad you got some value!

@gulfcoastlaserengraving9892 9 ай бұрын

Love the information presented here..

@LaserEngraving911 9 ай бұрын

Glad it was helpful!

@briankichta2027 8 ай бұрын

Good info!

@LaserEngraving911 8 ай бұрын

Thanks!

@bhenriksf 9 ай бұрын

Awesome tutorial and hats

@LaserEngraving911 9 ай бұрын

Glad you like them!

@drewmatney1907 9 ай бұрын

What a great video! I recently started trying to get a laser engraving business going. You are by FAR the best resource for any questions I had started out! Love the work!

@LaserEngraving911 9 ай бұрын

Glad to help! Comment any questions you'd like for us to do in a future video!

@SmithAerosports1 9 ай бұрын

Awesome! Perfect timing for some leather work I’m doing

@LaserEngraving911 9 ай бұрын

Glad to help for your project!

@manuelgarces1014 8 ай бұрын

Thanks for everything you share on your videos. Very informative and inspiring!

@LaserEngraving911 8 ай бұрын

Thanks for watching!

@ericwoodruff5516 9 ай бұрын

Thanks for all the information that you share. Always very helpful

@LaserEngraving911 9 ай бұрын

My pleasure!

@antkol 8 ай бұрын

Nice thanks for the helpful tips,

@LaserEngraving911 8 ай бұрын

You bet!

@perfectdesign6086 9 ай бұрын

Look very cool

@LaserEngraving911 9 ай бұрын

Thanks!

@perfectdesign6086 9 ай бұрын

Hey, your welcome. I stumbled across your video and enjoyed watching it. Have a great day. Keep up your great work.

@texx8891 9 ай бұрын

Great tutorial dude!

@LaserEngraving911 9 ай бұрын

Thanks!

@dian3145 9 ай бұрын

Your shop assistant is great! Thanks for the great demo, will certainly be exploring both suppliers.

@LaserEngraving911 9 ай бұрын

She is Amazing!

@elisetx213 9 ай бұрын

Love the informative video. Can't wait to try this on my hats! Cute kid too!!

@LaserEngraving911 9 ай бұрын

Thanks so much 😊

@BBS4uCrafts 9 ай бұрын

Thanks for the video it was very helpful, I learned something.

@LaserEngraving911 9 ай бұрын

Glad to hear it!

@XBoughtonX 9 ай бұрын

Great video! I have been looking for something to do with my laser and never even thought of engraving and making hats! Very inspiring! Thanks!

@LaserEngraving911 9 ай бұрын

Go for it!

@negretem1 9 ай бұрын

awesome video great tutorial - great tip on the temperature for the hat press!

@LaserEngraving911 9 ай бұрын

Thanks for watching!

@sethallen9272 9 ай бұрын

Love your videos I have learned a lot from watching them! Thank you for what you do!

@LaserEngraving911 9 ай бұрын

Glad you like them!

@davidarnold354 7 ай бұрын

Thanks for the video! I just recently purchased a laser and I am new to everything. Looking into trying my hand at leather patches and this video was very informative.

@LaserEngraving911 7 ай бұрын

Thanks David! Glad you got some value! Laser On!!

@SAllen-lf7ft 9 ай бұрын

Love it! hope you’re enjoying your coffee! 🤣

@LaserEngraving911 9 ай бұрын

Always!

@B-raddDaily 3 ай бұрын

This is a very informative video. I’ve been thinking of making hats for my wife’s boutique and selling them online. This video was very helpful. Thank you.

@LaserEngraving911 3 ай бұрын

You can do it! Its really a great money maker and super easy once you get your technique down!

@TP-si3km 4 ай бұрын

👍😃Danke für das Video

@LaserEngraving911 4 ай бұрын

Anytime!

@LuisCasstle 3 ай бұрын

Make sure your IR thermometer has a setting for measuring on shiny surfaces, as a shiny surface will throw the temp way off.

@LaserEngraving911 3 ай бұрын

Great tip!

@mavrikmavrik3032 8 ай бұрын

Thanks for the vid! I'm thinking about adding this to my leather business so I'm doing some research.

@LaserEngraving911 8 ай бұрын

Glad it was helpful!

@bigfranksworld 8 ай бұрын

Can't wait to do some leather work when my laser gets here. Great video. Subscribed!

@LaserEngraving911 8 ай бұрын

Awesome! Thank you!

@ShyneflowLC 9 ай бұрын

Great video bud! I need to get a hT press lol

@LaserEngraving911 9 ай бұрын

You should!

@Victoria.Henderson 9 ай бұрын

Great video. Loved the classic Transformers transition 😂

@LaserEngraving911 9 ай бұрын

Glad you loved it! It's a classic

@pablopicasso3641 8 ай бұрын

I want to start later engraving and I like your channel and suggestions. Can you please do an updated video for top 5 laxer engravers?

@LaserEngraving911 8 ай бұрын

I need to do this, for sure!

@mr.mrs.t.9292 9 ай бұрын

Great Video as usual. Would be interested in the #’s on your material costs and your suggestion of the margin for selling a hat. I enjoyed your previous videos on the topic of costs. I appreciate you taking the time to share your knowledge on the topics that matters to those in the laser business. Greetings from Vancouver, Washington

@LaserEngraving911 9 ай бұрын

The hats I use usually cost about 5.00 -7.00 depending on how many I buy at once, usually 24pcs case ++ will get you best price, the leather and adhesive are pennies on the dollar, unless you get some some really fancy premium leather. I see custom hats like this at craft shows, and online ranging from 19.99 to 27.00 per hat, so there is profit to be made there for sure. Thanks for supporting my channel!

@13stitchesllc60 Ай бұрын

I have the same cap press as you. You do not mention pressure I do not think. I even stopped video to see if I could see it on the machine, but it looked like "0". Thank you,

@JesusLopez-sb3ir 6 ай бұрын

I hope this message reaches you in time , but what kind of laser engraver do you recommend for beginners that will cut or engrave more that 1 patch or other material, at the same time for about 1000 dollars ?

@tyler4462 9 ай бұрын

Awesome video! I’m definitely going to have to try the Lone Star adhesive. Seems a lot easier than the 3m spray. I’ve been struggling with lasering the patches a bit. A can get the patch to look really good but I haven’t found a way to remove the soot from the engraved part. I can try to clean it off with oil but it darkens the leather too much. And suggestions so the soot doesn’t rub off on things?

@LaserEngraving911 9 ай бұрын

Glad it was helpful! couple of things, to try, mask off your leather before engraving (not my favorite way, but effective) 2nd turn of your air assist when engraving only, leave air assist ON for cutting only. Having air assist on during engraving is the main cause of soot and causes extra work for clean up. amzn.to/3LHp2l8

@sambarney5100 3 ай бұрын

Love this, thank you! What is the weight/ thickness and type of leather you order from them to make hat patches?

@LaserEngraving911 3 ай бұрын

I use vegtan Leather, 2-3oz, You cans use saddle leather too, or any type, just dont want to go to thick unless you have a dual heat hat press

@hcruz3008 9 ай бұрын

Here for the free hat!

@LaserEngraving911 9 ай бұрын

of course you are! :)

@aprildelibero6596 9 ай бұрын

I am excited to start making hats!! Veg tanned leather ✔️ Lone Star adhesive ✔️ Borrowed a friend’s spare hat press to get started ✔️ Just need hats. Would love some brand suggestions that you find work well with leather.

@LaserEngraving911 9 ай бұрын

Sounds great! The hats I use are from a company called Otto Cap and they're great quality, ottocap.com/.

@GPOutdoors 8 ай бұрын

Hey thanks very much for the detailed walk through and for letting us know the products you use. Question - is that adhesive permanent? In other words , after several months or some point in time, does the patch begin to peel off the hat? Thanks!

@LaserEngraving911 8 ай бұрын

very permanent

@rcamoonpie648 8 ай бұрын

Great videos that are very informative and to the point! New subscriber so it may have already been explained… But what is the Laser Cleaning Machine on your bench? By the way my wife is rolling her eyes at the thought of another “Gadget” as she calls all my tool obsessions! I just took delivery of my Mira 9 and I’m scheming ways to make a buck with it and all my sewing machines and since I’m already pretty versed with sewing leather I figured I’d apply the 2 together to be creative. Thanks for your input and knowledge!

@LaserEngraving911 8 ай бұрын

Sounds like a good combo, leather and lasers. The laser cleaning machine is a new item, Ill be doing a video on in the next few months. stay tuned. Thanks for watching!

@oclaser 8 ай бұрын

I still have the Stainless Steel water bottle when they just were interduced by Brookstone in 2008 (No double wall yet) and I put my son's name in trasformers font and Megatrone face on it. Of course he never used it, since you could taste the Stainless Steel in your water 😃. Thank You, for the tip on Lonestar Adhesive, will it work with Letherette as well?

@LaserEngraving911 8 ай бұрын

It 100% works great with Leatherette!

@BarbaraBeachy-qw2ce 5 ай бұрын

Could you please add a link to the laser machine you use or give a little insight as to what i should use to start with ??

@LaserEngraving911 5 ай бұрын

Sure thing, I use Epilog Co2 Lasers here in my shop for all my work, but...but! They are pricey! as they are the fastest and the highest quality Co2 lasers you money can buy. For you jus starting out and to not break the bank, You should look into the P2 By xTool! shrsl.com/4e18r it can do everything I do in my business, just not as fast,

@mikesmith7989 9 ай бұрын

Are you using any bottom heat doing this process? Nice work. I'll give this a try. Thanks

@LaserEngraving911 9 ай бұрын

Hey Mike, I am not.. I don't have the dual heat source hat press, would love to own one thought :) But I get by just fine for these patches and hats with the one I have, I would say for thicker patches dual heat press would be great to have, and you would only need to hit it once with dual heat source.

@juicebox069 4 ай бұрын

Question on the hide, which Hide do you select? Do you use garments, Upholstery, etc?

@LaserEngraving911 4 ай бұрын

Start with Vegtan leather from Hide House in Napa Ca. Its a great leather to engrave and cut, and you can stain too.

@brianpierrotti453 8 ай бұрын

so, just oil afterwards, no cleaner or degreaser? Mine always has lots of char after the cut even with air assist. Oh, also, do you only run air on the cut or do you run it for the engraving too?

@MichaelOliverSW 9 ай бұрын

Thanks for the video. That Vevor looks like it might come with a hat press in the photos. Did you get one with your order, and if so how well did it work?

@LaserEngraving911 9 ай бұрын

Yes, it did come with the attachment, but we think the dedicated hat press from Vevor would work better than the attachment on the heat press. Here's a link where you can find some options for a dedicated Vevor hat press: s.vevor.com/bfQwOB

@jse-1982 8 ай бұрын

At 5:10 you mentioned peeling off the cover sheet. Would it hurt anything to leave it on there during the engraving process? Say someone orders 100 patches, I don't want it to get all dirty in the meantime. Thanks for the great video.

@LaserEngraving911 8 ай бұрын

for sure, that would be a good way to ship and transport patches ready to go!

@CandyceFew Ай бұрын

Can I ask what you would use to clean or wipe down the leather patch before you press it? Thank you.

@LaserEngraving911 Ай бұрын

A damp cloth and a little windex, or LA Awesome.

@bucknboard 9 ай бұрын

I have an X Tool D1 Pro 10watt / any tips or suggestions on engraving leather? I don’t think it’s powerful enough to cut leather?

@LaserEngraving911 9 ай бұрын

I would think you can do think you can do thinner leather maybe 1-2oz thickness, but you may need to run the cut twice, just make sure you have good fume extraction, leather is stinky :) and you will not want that smell in your shop 😉

@747dom 4 ай бұрын

Hi, thanks for te video but I missed something I really wanted to know: how did you clean your patches after engraving? Whats that stuff? Thanks.

@LaserEngraving911 4 ай бұрын

I don't use cleaner, on my real leather patches, I just use a rag, and some walnut oil, or neatsfoot oil to wipe off any soot, cleans up real nice, if I'm cutting leatherette patches (faux leather) I just use some window cleaner on a rag, and wipe off.. Hope that helps.

@747dom 4 ай бұрын

That helps alot, thank you very much @@LaserEngraving911

@sallymiller4325 Ай бұрын

At what speed and power setting are you cutting your leather? I have a 90w CO2.

@LaserEngraving911 Ай бұрын

oh, you can cut thick leather all day with that 90 W CO2 I would try to stick with 2 to 3 ounce leather. I wouldn’t go much thicker than that unless you have a dual heat source hat, press, where you can heat the patch from the bottom and the top when you’re present it, my settings that I use for my Epilog Laser aren’t going to translate well to your 90 W CO2 laser so you’ll have to just start getting some thick leather and dialing in your settings

@reneeallison9059 2 ай бұрын

What laser do you think is best for leather patches on caps? Economical please?

@LaserEngraving911 2 ай бұрын

Hey There, good questions, for budget friendly units that are not only very easy to set up and use, for doing leather and faux leather patches, I would def recommend the XTool S1 shrsl.com/4d8q2 and really good fume extractor or a strong inline fan venting outside, Leather is super stinky when cut and engraved as well as faux leather. The S1 is my recommendation.

@JunkieVirus 6 ай бұрын

I notice when doing this, my leather get mush darker after the heating treatment. is that something you have too?

@LaserEngraving911 6 ай бұрын

no not really, might be too much heat, or the type of leather your using, or you might need to use a cover sheet, like parchment paper, or silcone.

@JunkieVirus 6 ай бұрын

I used the paper, but it must be a heat problem than I think. I’ll use the silicone next time. The leather is very high quality cow hide, around 2,5 mm thick.

@AlexElizabethDiaz-mb8fp 5 ай бұрын

Hello, which machine(s) would you recommend starting with. Primarily want to do leatherette hat patches with the intention of creating a business, but would like to be able to try other things if desired, like tumblers. I'm looking to spend the least to start (no more than 6k but would prefer to stay under 3k if possible) and will upgrade machines as needed. I would like plug and play or closest to, and reliability, most importantly I'd like to make a great product from the get go. Thank You !

@LaserEngraving911 5 ай бұрын

I would def consider the S1 Rotary Basic package by xTool I just reviewed for your price range, it can do all you need it to without banking the bank, and the user interface is easy to use. kzfaq.info/get/bejne/m76im7yEsrGwkXk.html Here is my link to the package ✅xTool S1 Rotary Package “ Best Package For Getting Started” shrsl.com/4d8q2

@AlexElizabethDiaz-mb8fp 5 ай бұрын

Awesome , thank you very much for your reply . Would you pick that over the omtech polar?

@user-wt3ge7pn7h 7 ай бұрын

Do you spray any water on the leather before you engrave it?

@LaserEngraving911 7 ай бұрын

No, I don't just engrave it as is :)

@MikesLife87 3 ай бұрын

Great video. So I have a question that no one has answered and also haven’t found. How long did it take you to laser engrave each sheet? Just a rough estimate per sheet you did. I just engraved mine and for one 2.5 inch patch at 300mm speed and 20% power. It took about 10 mins. Is that a normal time?

@LaserEngraving911 3 ай бұрын

Hey Thanks for the comment, so the answer to your questions is relative to the laser machine you have. The short answer is YES that is normal for lower cost budget machines, the the Xtool S1 and P2, Thunder Laser, Boss Laser, Omtech,Gewike Cloud etc, all didoe lasers, etc. While these machines are good at engraving and cutting they are very slow compared to professional Co2 lasers. That run time is normal, for reference I have Epilog laser machines in my shop, which are the best machines you can buy, and also cost 26k to 52k, they can do a 2.5" patch ins 1min and 20 sec. The more you pay for a laser. and that s not to say because the low cost machine are slow you cannot run successful business with them, not at all, you just cant output large volumes each day, and will be limited to how much you can produce each month. Hope that helps!

@MikesLife87 3 ай бұрын

@@LaserEngraving911 thank you so much for your answer. I have an Omtech 50w Co2 laser. I’m still new to this and lightburn. 😑. And hopefully I can upgrade in the further when the budget is right. Thank you again sir.

@RedPillSurvival 14 күн бұрын

Will the hats be machine washable with real leather? What about if using PU leather?

@LaserEngraving911 11 күн бұрын

iffy.. I dont know many folks that wash their hats. though. I dont. Best to just spot clean.

@pfiltz 6 ай бұрын

I'm not a hat guy, but do these Glued on patches withstand machine washing? I know some guys love their hats, and machine wash them.

@LaserEngraving911 6 ай бұрын

Not so sure about that, I don't know to many people that throw their hats in the machine machine though, That would not be good for the leather, or the hat.

@pfiltz 6 ай бұрын

Sure.... I'm just aware in these parts, that's what they do. I think I'll provide a card with each hat stating they should not be machine washed. I've got a hat press that I used years ago. I'm thinking of selling hats now that I have a laser. @@LaserEngraving911

@torowazup1 9 ай бұрын

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🤓

@opieshomeshop 5 ай бұрын

*_Ghost Busters_* 👻👻👻👻

@LaserEngraving911 5 ай бұрын

My Fav!

@opieshomeshop 5 ай бұрын

@@LaserEngraving911 HA HA. I could tell.

@user-sj2hn8ul9d 5 ай бұрын

Thought fake leather gives off toxic fumes whe lasered engraved ?

@LaserEngraving911 5 ай бұрын

Hey There, everything gives off toxic fumes when you laser cut and engrave it. That is why you need a great extraction fan, venting outside or a good fume extractor. Some things you never want to engrave or laser cut are, carbon fiber, PVC, ABS but this is mostly due to the fact that they offgas VOC's that will hurt the internals of your laser. For fake leather that is safe for your machine I recommend using Leatherette from JDS or Johns Plastics Plus. There are fake leather that do not have PCV in them.

@TP-si3km 4 ай бұрын

The vivor link doesn't work

@LaserEngraving911 4 ай бұрын

Ill check it!

@LaserEngraving911 4 ай бұрын

s.vevor.com/bfQTdj

@livelovesail5184 9 ай бұрын

Thankyou for the wonderful presentation and your son was awesome! Great information and very useful.

@LaserEngraving911 8 ай бұрын

Glad you enjoyed it!

@ErickCarbajal18 22 күн бұрын

Hola buenos días,creo que ya es tarde para que me regales una gorra verdad ?😢

@LaserEngraving911 21 күн бұрын

yes 🥺

@jasonlittle8814 5 ай бұрын

Says step by step guide and showing you everything on how to do it, then leaves out the hardest part that actually needs explaining. Of course that's on another video. It's not step by step if you leave out steps.

@LaserEngraving911 5 ай бұрын

What parts is the hardest part you would like to see covered?

@StumblingBumblingIdiot 9 ай бұрын

Cool tutorial man. Your son stole the show :) Was wondering why you didn't use the vevor for the hat? Is the machine you used better for the final patch?

@LaserEngraving911 9 ай бұрын

I try my best! I always feel they are too long so I appreciate that!