Laser Engraving with Aspire and CNC Machine

Рет қаралды 14,123

Күн бұрын

In this video I show you how I program laser engraving jobs in Aspire and also how I have my CNC machine set up to laser engrave.
Laser Module: amzn.to/2W96LXc

Пікірлер: 21

@arcrobotics9982 2 жыл бұрын

Thank you so much for this video :D.

@GeeksGoneBad 2 жыл бұрын

You are welcome! :) Thanks for watching!

@wikusdevos1957 6 ай бұрын

Hi This video helped me alot. Thank you. Just one question. How do i or where do i controll the power of the laser. I have actually successfully 3ngraved using your method but is is to dqrk. And on some spots very very deep

@GeeksGoneBad 6 ай бұрын

I struggled and struggled with that and eventually just bought an Ortur Laser and Lightburn :)

@gerhardachrainer6116 3 жыл бұрын

Hi. Nice combination of CNC and Laser. Would you mind telling me which clamping system you are using for the workpiece (the blue screw on the right). Looks interesting.

@GeeksGoneBad 3 жыл бұрын

Thanks! The Kreg Dog Clamps are these - amzn.to/3ppIeai and the bench dogs are these - amzn.to/3puFgRW

@gerhardachrainer6116 3 жыл бұрын

@@GeeksGoneBad Great, thanks!

@jimanderson8173 3 жыл бұрын

Very nice!! I would like to see your setup. I laser but do not know what the best way to set it up yet.

@GeeksGoneBad 3 жыл бұрын

I am working on a video of my set up :) stay tuned

@thriller0071 8 ай бұрын

what kind of clamping system do you have there?

@GeeksGoneBad 8 ай бұрын

They are called "Kreg In-Line" clamps

@joshporter6079 3 жыл бұрын

it looked like the laser was running while you jogged? is this true or just a camera issue?

@GeeksGoneBad 3 жыл бұрын

I think I have a ground issue or something - because yes the laser sometimes lights when I jog - if I fiddle with the wires I can get it to stop so I have a bad connection somewhere or something

@andyreid7274 3 жыл бұрын

@@GeeksGoneBad are your cables shielded?

@GeeksGoneBad 3 жыл бұрын

@@andyreid7274 The motor wires for the CNC are, but not the laser control ones - but I've kinda moved on to a different laser set up anyway :)

@gmopinillosvpinillos2827 4 жыл бұрын

Hi, where I get post proccesor "mach 3 laser ..." ? (when I am going to save file). Your links not working. Thank you

@GeeksGoneBad 4 жыл бұрын

My links are to the laser itself, thanks for letting me know they were not working :) - I am using the Post Processor from here for Aspire jtechphotonics.com/?p=3851

@gmopinillosvpinillos2827 4 жыл бұрын

@@GeeksGoneBad , IT WORKED !!! Thank you so much.

@GeeksGoneBad 4 жыл бұрын

@@gmopinillosvpinillos2827 Excellent! Glad you got it! :)