A quick video on laser engraving Zippo Lighters. #zippo #laserengraving #laserengraver
Пікірлер: 75
@nickmalone35993 жыл бұрын
Great tip on the dry eraser. I just got a laser and was struggling with Lining things up.
@Engraving-ld8gn3 жыл бұрын
Great to hear it! Easy little trick that can save a boat load of time.
@mrpooltable9374 Жыл бұрын
That is nicely done👏
@Engraving-ld8gn Жыл бұрын
Thank you!
@malaifaizul2 жыл бұрын
Hi! Great video. I got a question. Could you pls see the manekineko zippo design. What is the process? Im curious. Is that laser etching? If yes, how did they put the colours on? Thanks in advance
@giookee35973 жыл бұрын
Nice videos.. Waiting for another video 😊
@Engraving-ld8gn3 жыл бұрын
Thanks! Yeah, it's hard sometimes when it gets busy in the shop to get the videos shot. Many times the customer is over our shoulder watching and/or the product has personal info on it which I tend to not post or video.
@2009j4ck Жыл бұрын
Good job. Would U plz tell us the parameter you use for marking that chrome zippo? Thanks.
@MrBigleo25 Жыл бұрын
how do u focus with the ruler
@wes73103 жыл бұрын
Great video! Love all the info you are showing. What type of air evacuation system are you running? What cfm? Thank you
@Engraving-ld8gn3 жыл бұрын
I bought an aftermarket, fancy, high tech, expensive…. piece of crap. 🤣 Then I switched to the one that came with the laser, built an acoustic box for noise suppression and all is good! I’m unsure of the air it moves but it works great. I can even use it as I use two lasers.
@stevenchristiansen2892 жыл бұрын
Im new with a 30w JPT Fiber from Cloudray , so I'm running EZ cad2. So to engrave multiple items (with same logo etc...) in 1 production run, you can just do a copy function and place the copy's wherever in the workspace? I have a lot of bullet casings I want to do for a local Veterans group and being able to do 6 or 9 in a run (170×170mm work area for my lens) would be a great time-saver.
@Engraving-ld8gn2 жыл бұрын
Yes, copy and paste works fine inside EZCAD. You may have to use multiple settings to get a desired outcome on brass though, it’s a different beast all together. You may have to use one setting for the cut in a second setting to brighten it up! Have fun and be safe!
@stevenchristiansen2892 жыл бұрын
@@Engraving-ld8gn thanks for your time and input!
@zeamanning2262 жыл бұрын
Hello! I currently have a foxalien Reizer and mine has a horrible frame set up in lasergrbl. When you’re able to have the entire set up like the rectangle frame before engraving, is that because of the laser or the program? It would make life so much easier!
@Engraving-ld8gn Жыл бұрын
Not sure how I missed your question. It’s due to the software. EZCAD2 sends the info to the laser with proper settings. The new Lightburn for galvos can do the same thing, with an extra outline ability.
@brookswaitt6114 Жыл бұрын
What depth did you end up engraving into them? I noticed you did four passes, but not sure what your original setting was at.
@Engraving-ld8gn Жыл бұрын
The more you do, the more you learn. I use two different settings. One to blast the top coat off and the second to engrave until I feel it looks best. I was not looking to accomplish any specific depth. Hope that helps!
@MrBigleo25 Жыл бұрын
how do u make it a box and not letters
@CybrexKing3 жыл бұрын
Hi, great vid..what wattage laser are you using..if you don't mind me asking?
@Engraving-ld8gn3 жыл бұрын
We use a 30 watt laser. Thanks for watching... see what I did there?!! 😂🤣😎
@ob1coyote8 ай бұрын
I'm confused why you're having to line up the elements of the engraving. I thought that the entire point of having a jig was so that everything on your screen is automatically aligned to the jig. Is this the first time using the jig, or were you not able to position the jig where you previously set it up? I'm looking into purchasing a fiber laser, and I'm just trying to understand. Thank you.
@jamesinvegas8 ай бұрын
Do you do custom work with logos? Can I buy some?
@MrBigleo252 жыл бұрын
very nice
@Engraving-ld8gn Жыл бұрын
Thank you!
@benjaminjerome85973 жыл бұрын
What lens are you using for this?
@Engraving-ld8gn3 жыл бұрын
1046mm
@ciudaddellaser38483 жыл бұрын
Nice engrave, why you did it 4 times ? looking for a better shine? or a depth engrave ? thanks a lot
@Engraving-ld8gn3 жыл бұрын
Yes, just making sure to burn all the coding off and it’s the actual metal beneath it.
@Learjetz692 жыл бұрын
I noticed you use fume extraction. Can you explain the chemical composition of the dust you removed from the surface with the blue towel after engraving? It is my understanding engraving removes a chromium oxide layer from the surface. Chemically speaking, what happens to that layer during engraving and what is the chemical composition of the dust seen after engraving?
@Engraving-ld8gn2 жыл бұрын
You have entered weeds in which no man has entered before. 🤣😳 No sir, the only thought I’ve given to the dust is wether to use a wipe or air to remove it.
@netinfluencer2 жыл бұрын
Well I have many questions: How do you fit grafics to size of zippo? What software do u use? How powerful Is your laser? How much power do u use. Is all engarvings require same power on laser? How do you position grafics on zippo????
@Engraving-ld8gn2 жыл бұрын
Well my particular laser projects an image onto the surface and with him engraving. So it’s easy for me to size the image according to what I’m engraving. Your laser may be different and you may have to measure or use some other method. I use a 30 W fiber laser and my settings will be different from yours. Engravings will require various settings depending on what your engraving, how deep you wanna go, and the desired outcome. Practice, practice, and write down your settings.
@bobreichel3 жыл бұрын
So I am wondering what your settings are? Good video, I also have a 50 W laser.
@Engraving-ld8gn3 жыл бұрын
People asked this a lot and it’s kind of the same answer. I’m not blowing anybody off but all the settings vary from laser to laser. All I can say is start out with understanding what your focal distance is and vary in speed in power and you will figure out the best setting for your machine. Again, I’m not blowing you off or your question but that really is the answer. The upside to that is when finding the best setting for different materials you’ll really get to know your laser and its capabilities! Congrats on a 50 watt fiber laser. They’re not cheap and they’re super fun!
@CadicadMaroc2 жыл бұрын
@@Engraving-ld8gn I have also a 50 Watt Raycus Fiber Laser that I'm using for cutting and marking gold and silver. And of course the first question is when you see such beautiful and interesting video "Which Settings are you using to get such good results!?" I think nobody wanna hear your answear but indeed it's the right answear! Thanks for sharing your work with ohers and all the best.
@novemberstango7291 Жыл бұрын
What machine is that and where can I buy it?? Does it come with the program? Awesome video!
@Engraving-ld8gn Жыл бұрын
It’s from San Antonio Laser Engraving. Tell them I sent you.
@arthurgrossmann-lemauguen35063 жыл бұрын
Hi i would like to replicate your project to customise my zippo and i would like like to know if it was possible to get the plan or the inkscape file of your zippo holder? if it was possible it would help me a lot. Have a nice day
@Engraving-ld8gn3 жыл бұрын
I bought the Zippo holder from L&M Precision - ask for Mike. Great guy.
@Flametamer145 Жыл бұрын
What settings did you use. Looks awesome.
@The_Robot_Arm Жыл бұрын
can I please have the make and model of this engraving machine?
@heidis6004 Жыл бұрын
I have the xTool M1, could I do this with a none shiny zippo?
@Engraving-ld8gn Жыл бұрын
I’m sure you could with the laser.. Give it a try!
@lightningstrikelures23932 жыл бұрын
What Lazer are you using. Please and thank you.
@Engraving-ld8gn2 жыл бұрын
We use a 30w fiber laser
@all-boxspainhealthwellbein5072 Жыл бұрын
What fibre engraver are you using?
@Engraving-ld8gn Жыл бұрын
30 watt
@connerwilson23573 жыл бұрын
How clear can you engrave? Could you engrave photos or just logos?
@Engraving-ld8gn3 жыл бұрын
Hey Connor thanks for watching! Yes I can do photos but it really depends on what I’m engraving. I have yet to do a photo on a zippo but I can’t imagine that would be an issue.
@Engraving-ld8gn3 жыл бұрын
If you check out my Instagram page you’ll see some photos that I’ve engraved on some guitar neck plates that came out really nice.
@connerwilson23573 жыл бұрын
@@Engraving-ld8gn Ok, thanks.
@highlife72533 жыл бұрын
hello, do you guys know any website where i can buy zippo lighters for cheap i m trying to start my own busnies evryting about engraving
@Engraving-ld8gn3 жыл бұрын
Trial and error really. Sourcing is always a battle to find the right price. Look online and in stores for the best deals. Amazon, eBay, etc…just make sure you are buying authentic merchandise!! There are lots of fakes out there.
@joephilly6488 Жыл бұрын
Whats the filter/screen on your fume duct?
@Engraving-ld8gn Жыл бұрын
It’s a silk stocking from the dollar tree. It’s just a quick filter for the solid particles before they enter my exhaust fan and ruin it. Thanks for watching!
@-choppy3 жыл бұрын
Where Can I buy lighters custom made from you
@Engraving-ld8gn3 жыл бұрын
Send an email and we can set it up! Chris@1441engraving.com
@tequilandtacos2 жыл бұрын
Do you do this as a business or what because I have about 40-50 lighters I need done
@Engraving-ld8gn2 жыл бұрын
Yes it’s a business. Send me an email at chris@1441engraving.com
@takuyat90993 жыл бұрын
What percentage are you using with your 50w laser?
@Engraving-ld8gn3 жыл бұрын
Percentage of what exactly?
@CadicadMaroc2 жыл бұрын
@@Engraving-ld8gn There is just one :) Power % hhh
@mastarsyria7572 Жыл бұрын
هل هذا الشيئ في مصنع zippo
@salahalzalloum44213 жыл бұрын
Hey, where and how can I order that zippo holder?
@Engraving-ld8gn3 жыл бұрын
L&H Precision
@BurnstickProduction3 жыл бұрын
What kinda laser engraver is that?
@Engraving-ld8gn3 жыл бұрын
San Antonio Laser Engraving
@tuanzippolighter34793 жыл бұрын
Hello. I live in Vietnam. It's great to watch you sculpt your zippo. Can you share those pictures with me?
@Engraving-ld8gn3 жыл бұрын
I'm not sure what pictures you are referring to. The images that I use are for government employees and I don't share them. You may be able to find them elsewhere if you look though. ;)
@STDNY3 жыл бұрын
Your laser machine model and manufacturer please?
@Engraving-ld8gn3 жыл бұрын
Bought from the great folks at San Antonio Laser Engraving.
@MrSouthofBoston3 жыл бұрын
Do you have a business website?
@Engraving-ld8gn3 жыл бұрын
Yes, but it is w of a landing page to direct to our Instagram account. We also sell on Etsy and eBay… Amazon as well but they are a PITA. Our website is www.1441engraving.com