Embossing In Gold With Custom Laser Engraved Stamps

No video

Embossing In Gold With Custom Laser Engraved Stamps

Рет қаралды 16,279

Laser Engraving 911

Күн бұрын

Пікірлер: 94

@qwiggles4154 11 ай бұрын

You always do the most interesting things with your laser, I really appreciate your creativity figuring out what else your laser can do.

@LaserEngraving911 11 ай бұрын

Thank you very much! I love doing that kind of stuff!

@Ricks2Cents 11 ай бұрын

*I’m glad I stay until the end. I almost stopped the video when I saw the results after the powder was applied. Huge Difference After the Heat is Applied!!!*

@LaserEngraving911 11 ай бұрын

Its pretty cool tech for sure! You should see the black!

@andyjackson7407 11 ай бұрын

Going to put my wife's logo for her new business on an order book for her - thanks so much for sharing

@LaserEngraving911 11 ай бұрын

Fantastic!

@cliffgeter1105 Ай бұрын

Love it...I know a few B&B owners who would love to have monogrammed notebooks in their gift shops. This will sell in my craft boutique as well...

@LaserEngraving911 Ай бұрын

that's so cool, I hope you have fun trying this!

@Makersandjoe 11 ай бұрын

Awesome. Last step blew me away!. Great work mike. Thanks for the lesson.

@LaserEngraving911 11 ай бұрын

Glad you liked it! your very welcome

@Cspringslaser 11 ай бұрын

Excellent, never thought of embossing with the laser before…always appreciate your content.

@LaserEngraving911 11 ай бұрын

Thanks for watching!

@namegoeshere6923 11 ай бұрын

Nailed it! Great technique! Can’t wait to see the full video.

@LaserEngraving911 11 ай бұрын

Coming soon!

@davidelder5399 11 ай бұрын

Great video, awesome result, another project for the laser. Thanks for taking the time to make this video👍

@LaserEngraving911 11 ай бұрын

No problem 👍 Thanks Dave!!

@ivorytuskmeg 11 ай бұрын

Thank you so much!! I've been struggling all summer to add gold lettering and graphics to leather luggage tags, and I've wasted a lot of time and effort. I tried liquid mask/liquid gold leaf/leather primer and finishes in so many iterations and orders, and I was about to give up. Thank you, I can't wait to give this a try.

@LaserEngraving911 11 ай бұрын

Glad I could help! it works best one smooth finished leather, no so good on raw vegtan, because the glue soaks into the raw leather to fast, need the glue to float ontop, so your application should work well

@ivorytuskmeg 11 ай бұрын

@@LaserEngraving911 That's reassuring, thanks! If I may ask, have you ever experimented with using tape or liquid mask to keep the glue in place on your design versus creating an acrylic stamp? The stamping technique seems perfect for a scenario wherein I'll be making the same design repeatedly, but if I'm making different monograms for each customer, my desire for efficiency wants there to be an easier way. Haha. Thanks, your channel is wonderful.

@LaserEngraving911 11 ай бұрын

@@ivorytuskmeg Yes, and my final thoughts are do not put anything on the surface like mask or tape, liquid mask that may affect the finish of the leather or leatherette, the way I demonstrated I had the best results with.

@danadkin8652 11 ай бұрын

so it was , mm this is interesting, then ah, oh wow followed so cute!

@gracedesilva. 11 ай бұрын

I’d love to try this for some leather shoes! Great video thanks:)

@LaserEngraving911 11 ай бұрын

Go for it!

@nipajhaveri434 11 ай бұрын

Thie was excellent. I got so many ideas floating around in my brain. Thanks!

@LaserEngraving911 11 ай бұрын

Great to hear! I thought so too!

@AnthonyGriz 11 ай бұрын

That is freakin' awesome!

@LaserEngraving911 11 ай бұрын

Thanks!! Hope To Inspire!

@AnthonyGriz 11 ай бұрын

@@LaserEngraving911 definitely inspiring, thank you!!

@meederr 11 ай бұрын

Great demo! I'm going to try this out on some PU journals.

@LaserEngraving911 11 ай бұрын

Have fun!

@dian3145 11 ай бұрын

The ducky stole the show ❤ How long does the glue stay usable on the pad, once closed up? Fun little project!

@LaserEngraving911 11 ай бұрын

Thanks!! I found the glue stay pretty wet and tacky for about 3-5min hope you have fun experimenting!

@elisetx213 11 ай бұрын

Very cool! So, much info! Thanks for the video.

@LaserEngraving911 11 ай бұрын

You bet!

@directedt3ch 11 ай бұрын

Great video! Thank you!

@LaserEngraving911 11 ай бұрын

Glad you liked it! Thanks!

@lrmodranoel 11 ай бұрын

Screen printing is also a good method.

@ts8945 11 ай бұрын

Great video!

@LaserEngraving911 11 ай бұрын

Glad you enjoyed it

@edwardolivares5038 6 ай бұрын

That’s awesome 😮😮😮👍🏽👍🏽👍🏽

@LaserEngraving911 6 ай бұрын

Thanks!

@evilutionltd Ай бұрын

I wonder what it'd look like if you used a press to deboss the design into the leather first before doing this?

@LaserEngraving911 Ай бұрын

Probably pretty awesome!

@gerritgeldenhuys2763 5 ай бұрын

Excellent !. Do you think stamp rubber would make a embossing stamp as well if glued to a hard backing. I think it would go better into the little grooves of the leather, or maybe it would push out from the stamp and ruin it all.

@LaserEngraving911 5 ай бұрын

Great idea! always worth a try, anther material might be lino stamp material.

@carmelishus 9 ай бұрын

Did you do a video on making the actual acrylic debossing stamp?

@LaserEngraving911 9 ай бұрын

Working on that!

@rychei5393 11 ай бұрын

Would like to see if these could be used for debossing and pressure activated foils.

@LaserEngraving911 11 ай бұрын

I think you need heat and pressure for those foils, thats why they use metal stamping dies, you cant heat the acrylic up hot enough to activate the glue on the foil, unless you know of a foil that doesn’t require heat that would work

@bitsurfer0101 8 ай бұрын

I would like to use it to emboss some chopsticks but I'm not sure it would work since I would need some small features.

@LaserEngraving911 8 ай бұрын

not so sure that is going to work :( have not tired the powder on wood, but regarding how small you can go, you could make a stamp that small for sure.

@bitsurfer0101 8 ай бұрын

Have you tried using/making rubber stamps?@@LaserEngraving911

@ArnaudC. 2 ай бұрын

Hey ! I'm Franch guy. I see your chanel. Thx for helping ! I want to test this on Acrylique ? It's possible you think ?

@LaserEngraving911 2 ай бұрын

Im not sure how the bond to acrylic would be, I think it would bond well, but not stand up to heavy abuse.

@jamesshelton1124 11 ай бұрын

You talk about cutting this out of paper theoretically, you could take a blank sticker material such as the every full page labels white not cut it down and make your stencil out of that because you could stick it in place I could stay in place until everything was done, and then it simply peels off easy

@LaserEngraving911 11 ай бұрын

great idea!

@dasplague3103 11 ай бұрын

I'd be concerned about if the sticker material can be heat cut without offgassing.

@jamesshelton1124 11 ай бұрын

@@dasplague3103 when laser cutting, you should have the proper airflow that holds the offgassing away so offgassing cannot be an issue

@DoctorSib 7 ай бұрын

I usually use heat transfer foil vinyl, but I'm curious how using embossing powder would go! Do you think that using a heat press would melt the powder effectively with a silicone sheet cover, or do you think it would be problematic with the glue? Another fun idea: engraving the leatherette journals and pouring the embossing powder into it! (Making sure of course that there's no PVC in the journals. 😆)

@LaserEngraving911 7 ай бұрын

Yes, absolutely its possible but you might smash the powder and not get the raised effect, as far as pouring in the engraving, you would also have to get the glue in there well which could be problematic. But def worth a go!

@boruchlen 7 ай бұрын

Great video! Very helpful. If I may ask, how do you make the stamps? Do you have a tutorial? Or svg files for sale?

@LaserEngraving911 7 ай бұрын

Yes I do! coming in another video

@taeka1111 10 ай бұрын

I think you should prep it with antistatic pad..

@LaserEngraving911 10 ай бұрын

sure give it a try, I did not find that necessary, but if you think it would help go for it!

@freman 11 ай бұрын

Looks like a course powder coating paint... makes me wonder if I can adapt that stuff to do this (on account of I have 3kg of the stuff lol)

@LaserEngraving911 11 ай бұрын

I thought so too but its very different even tried this method with powder coat paint with poor results, Embossing Powder is a different animal

@BrownDogOriginals 11 ай бұрын

Out of curiosity, why did you create the stamp using acrylic as opposed to the rubber stamping sheets? Do you see a benefit of one over the other?

@LaserEngraving911 11 ай бұрын

Rubber is very stinky and require extra clean up, and more expensive, acrylic works just fine

@bitsurfer0101 8 ай бұрын

What is the smallest feature size you've tried to emboss?

@djs2220 11 ай бұрын

Do you have a video on how you made the stamp?

@LaserEngraving911 11 ай бұрын

Yess!! The full tutorial is coming next week!

@geniuskatie6813 6 ай бұрын

wooooooow

@LaserEngraving911 6 ай бұрын

its is pretty wow!! 😂

@amoreyjones565 11 ай бұрын

I got a 911,I bought a comgrow z1 and I am unable to connect it to lightburn or laser grbl I can see it in device manager but it wot connect.

@davidpalmer8419 10 ай бұрын

Can a similar embossing stamp be made with a diode laser using a black acrylic?

@LaserEngraving911 10 ай бұрын

I don't see why not, it will probably take you a while to get he depth required suing a diode, but in theory, its do-able. 👍

@davidpalmer8419 10 ай бұрын

@@LaserEngraving911or could you engrave the leather first and then fill the engraving with the embossing powder? sorry for all the questions lol. Im getting my first diode laser tomorrow :)

@meederr 11 ай бұрын

how does the embossing hold up with wear and tear? Any special steps to waterproof?

@LaserEngraving911 11 ай бұрын

Hold up great when done right, and it depends on the surface you are using it on as well, its water proof!

@semperstitchingllc7801 11 ай бұрын

Can you put embossing powder into an engrave (without the glue) and melt it instead of trying to paint fill an engraving?

@LaserEngraving911 11 ай бұрын

possible yes! but make sure you sweep away all excess outside the engraving, and not sure if it bonds to wood and other substrates

@Mellowdark17 3 ай бұрын

Where’s the video of you making the stamps?

@LaserEngraving911 3 ай бұрын

Haven't uploaded it yet.. thanks for the reminder!

@hotattic 11 ай бұрын

Just an odd thought. How do you think the embossing powder would work spread over an engraved area then lasered again?

@LaserEngraving911 11 ай бұрын

tried it, its to heat sensitive to do it that way, heat gun works just right..

@hotattic 11 ай бұрын

Me not knowing much about lasers and not knowing what laser you use , would a 10w diode laser be a possibility?@@LaserEngraving911

@torowazup1 11 ай бұрын

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

@LaserEngraving911 11 ай бұрын

😎😎

@user-vb3sd7hq3g 2 күн бұрын

❤❤👍👽🌈

@Stevieboy7 11 ай бұрын

You're using the term embossing incorrectly for leather. Embossing in leather means its being actually compressed/depth to the design via pressure and/or heat. What you have done is called stamping, not embossing. Very very different. Stamping is essentially painting/colouring. Embossing is pressing depth into the material.

@kerrypratt6077 11 ай бұрын

I believe if you make the stamp with enough depth that you can probably combine the two processes. Emboss the leather using the positive and then apply the glue, or perhaps just fill the embossed mark on the leather with the powder, and then heat it up to fuse the powder into the embossing.

@LaserEngraving911 11 ай бұрын

I like your way of thinking!! 😎

@jonathanhorvat2452 11 ай бұрын

@@kerrypratt6077 i will try this out, was thinking about it during video