Laserworld DS-2000RGB MK4 and Laserworld DS-3000RGB MK4 product video

Рет қаралды 8,549

10 ай бұрын

The Laserworld DS-2000RGB MK4 and Laserworld DS-3000RGB MK4 are high power full colour semi professional laser systems with built in multi-control mainboard. Amazing DMX control with internal safety settings making it simple to control multiple units along with the rest of your DMX lighting. Full feature laser show software license included! Sealed optics section for low maintenance. Perfect for small/medium sized nightclub installs, indoor events and mobile DJs.
- 2'000 mW / 3'000 mW guaranteed power
- Graphics capable - 40 kpps@8° ILDA
- Max scan angle 50°
- Full colour mixing - analog modulation
- Extremely sharp intense beams - ca. 4 mm beam diameter and low divergence of 0.9 mrad
- Save safety settings direct to the laser and they apply in all modes
- Link multiple units with linking Power, DMX and ILDA
- Free computer control software - Showeditor - upgradable to Showcontroller
- Multiple control modes - Auto, DMX, Artnet and ILDA
ShowNET mainboard as standard:
Various control options: ILDA, Professional DMX and ArtNET (two modes), LAN (computer control, integrated DAC), Stand-Alone Operation, ILDA Streaming Receiver, Master-Slave
Create custom content, store it inside the laser and play it back in different modes
Free laser show control software included
FB4 modification available on request.
Find more details:
www.laserworld.com/en/laserwo...
www.laserworld.com/de/laserwo...
#laserworld #diodeseries #laser #lasershow #nightclub #discothek #shownet #lasercontrol #professionallaser #laserdisplay

Пікірлер: 15

@kinimod_2312 10 ай бұрын

nice introduction i`ve already got one of these. The lasers are high quality and Shownet is a good thing for beginners but also for professionals never regret to buy the Diode-Series Lasers.

@flatlinersholger3772 10 ай бұрын

Wäre schön auch zu erfahren, was denn die MK4 Serie überhaupt von der MK3 unterscheidet? Im Video sind nämlich keine Unterschiede auszumachen.

@LaserworldAG 10 ай бұрын

Die MK4 haben schlichtweg innen einen weiter optimierten Aufbau und kleine Verbesserungen in der Optiksektion. Grundsätzlich sind rein äusserlich keine Änderungen ersichtlich, alles geräteinterne Optimierungen.

@filtax3984 10 ай бұрын

can i use the show editor program with ilda connection?and the connection with the pc to use the internal show net ,is simply a lan cable?

@LaserworldAG 10 ай бұрын

You can use the Showeditor Program with any ShowNET interface - external or internal. An external interface allows for using ILDA cables and connection to any ILDA capable laser. However, the internal ShowNET mainboards do not output an ILDA signal to the external connectors, it is just used internally. You simply connect the ShowNET mainboard (no matter if internal or external) to your computer with LAN cable. You can connect several ShowNETs using normal network switches. You can learn more about the ShowNET connectivity here: www.laserworld.com/en/laser-online-user-manual/shownet-dip-switch-panel.html and here: www.laserworld.com/en/laser-online-user-manual/shownet-display-panel.html

@climbingjohn 10 ай бұрын

if i run the mk4 along side a mk3 will there be a noticeable difference in the visual output of the laser? different colour tones ect? cheers

@LaserworldAG 10 ай бұрын

Not in the color tones, no. The beam profile is slightly better on the MK4, but that only matters over longer distances. In general you would probably not find a noticeable difference at all. The improvements are on the constructive side internally.

@climbingjohn 10 ай бұрын

@@LaserworldAG thanks

@filtax3984 8 ай бұрын

hi.can you tell me what is the little metal plate on the right side of the laser,as we look the front of the device near the printed laserworld logo?thanks

@LaserworldAG 8 ай бұрын

These plates are covers for accessing the dichroic mirrors for doing color convergence alignment, if required.

@filtax3984 8 ай бұрын

@@LaserworldAG many thanks

@thefullyautomaticmodel6210 6 ай бұрын

Can you provide a link to the API needed to interface with a mac running touchdesigner and a DS1000 mk4 please.

@LaserworldAG 6 ай бұрын

You don't need anything - it is already implemented in Touchdesigner. Just connect via LAN and go! Remember to use the latest Touchdesigner version.

@Marius-on6uf 10 ай бұрын

Is there any difference to the models of MK 3 ?

@LaserworldAG 10 ай бұрын

The MK4s simply have a further optimized design inside and small improvements in the optics section. Basically, no changes are visible externally, all internal optimizations.