Click Hear To Support Doubleboost www.patreon.com/bePatron?u=57... l. l.php?u=https%... www.r-techwelding.co.uk/
Пікірлер: 32
@robertmorrisby64953 ай бұрын
Thank you, very useful
@davidforbes6250 Жыл бұрын
Soot from an appropriate flame worked well in my days on this kind of work.
@lensman5762 Жыл бұрын
Thanks for this. It certainly is a lot harder than it looks. A couple of years ago I managed to turn some Morse 0 taper for my Sherline lathe. It took a couple of goes but it worked in the end. The rigidity of the lathe is paramount here.
@dermotkelly2971 Жыл бұрын
Good video john. Not many people know how to machine tapers.
@sandraalves73086 ай бұрын
Thanks for the tip of the tailstock off set direction
@jdmccorful Жыл бұрын
Thankyou for the lesson! Enjoyed watching.
@mrstan3997 Жыл бұрын
👍👍👍👍Good one John, keep 'em coming. Thanks for sharing
@paulp96275 Жыл бұрын
Thanks John excellent vid 👍👨🏻🏭
@mickymondo7463 Жыл бұрын
Offsetting the tailstock is the best method for singlepoint cutting of tapered threads, though getting the tailstock back into alignment can be tiresome, it's quicker if you mark things prior to moving it over, and don't forget, tailstock towards you gives thinner end at tailstock and tailstock away gives a thinner end at the chuck
@kentuckytrapper780 Жыл бұрын
Great info John, keep'um coming..👍
@graedonmunro1793 Жыл бұрын
good tutorial again John,, keep it coming
@edmac8212 Жыл бұрын
glad you done this need to cut 1 for a tool thanks
@ralphbarnes2994 Жыл бұрын
very good. I learned a lot.
@paulmorrey733 Жыл бұрын
Thanks John
@fuzzy1dk Жыл бұрын
seems like it would be important to have the clock gauge exactly on center height to get the correct taper. You could try it, after setting the compound angle, lower the clock slightly and run it back forth again
@staysheep8002 ай бұрын
My idea exactly. If you’re above or below center by literally anything you’re measurement will be wrong
@bobdixon6060 Жыл бұрын
as per brill
@derrick_v Жыл бұрын
Thanks
@manufacturingandrepairingskill Жыл бұрын
Nice video
@alltechinbox Жыл бұрын
I have played so many pranks with a tub of blue. I am too old to be bothered now :-)
@douglasthompson2740 Жыл бұрын
If one adds a full taper attachment to his lathe does that interfere with putting in a DRO? Specifically the X axis of a DRO. At first glance on my Grizzly G4003G it would appear to require remaking the back shield as well as take up the space the scale would go on the lathe bed? I haven't seen anyone doing taper attachments on the smaller (12" x 36") lathes. I would be interested in your thoughts on the subject.
@doubleboost Жыл бұрын
The taper attachment would mean removing the dro scale
@douglasthompson2740 Жыл бұрын
@@doubleboost Ouch! I was afraid of that. Thanks for the reply.
@jamesgui37333 ай бұрын
Yeah I can't get it to 0 out on my indicator. It's either too much or too little
@johnsmith-wl8dp5 ай бұрын
hi John, do you have details drawing for rasing the head on your mill please? i have one like yours and need to raise the head please.