yeah i had a hole in my intercooler piping was all excited how much more powerful my car is gonna be when i replace it, it was the same :D

Good videos as always. You need to mention/remember that with the leak the turbo will work harder to make the same target and as such it will heat up more and be less efficient. You won’t see that on the dyno pulls but on track you won’t lose as much as before because the turbo won’t over-work and the intercooler won’t heat soak as much. So it’s about what you’re now not losing because you fixed it, not what you could gain.

Nice technical vlog, would not mind to see more. Can't wait for the bigger upgrades.

Finally the video we have been waiting for!!!

Great vid as always! 👌🏻🤟🏻

5:00 People are so used to your "bad" jokes that you don't have to worry about them, even if they are holding a knife in their hands :'D

Thanks for sharring Misha!

I am pretty sure that the power figures are the same because even though there was a boost leak, the engine was getting the same amount of air, ie the turbocharger was working harder to achieve the same boost. I think that a slight difference in response and lag is expected after the installation of the new intercooler.

And as always, Great Content Misha!! Have a great lap!!

I was actually laughing the whole way through this video, lol Cheers!

Notice that the new intercooler only has 12 rows, whereas the old one had 13 rows. So it won't be as good as OE. Learned to pay attention to such details the hard way :(

Good video

Any bets, when we gonna see the suspension going in? :D I go with late September 2021.

3:00 Bruh..

You will probably get more consistent power over a lap. Having that intercooler fixed might not be that much difference once on a dyno, but hopefully you'll be able to tell while lapping, that the power has not fell off. Maybe a mph, (kmh) or two down the stretches?

The new intercooler will be way more efficient than the old intercooler, which will mean that intake temps are kept better for longer and hence the HP will be available even when external and engine temps rise up.

6:25 I think Water Temperature would make for a better abbreviation. Temperature Water makes TWAT like on that motec display :D :D :D

Any updates on the JRZs?

Do u have any idea why my car does this uphill stuck at 60kmh 3gear i press more gass but it looks like nthg goes Is vakum leak or dpf ?

The TDi turbo is very under stressed as standard and has lots of capacity, that’s why your boost leak didn’t effect the power output, it should improve lag and throttle response on track though.

Is the Intercooler placemant same for the Mk6 tdi. I think I have the same leak after putting the cr170 and a tune in my mk6 tdi

The Ringtracktor´s just smokin hot carmrade :D

Nice.

what was the intake air temperature before and how much decreased after?

Only just watching this in 22 and have same issue on my Bora of leaking intercooler, noticed ducting was rubbing through IC so cut it down but the main leak was on the bottom from joint betweem the core end plate and crimped joint. Fixed seam with metal putty for now and is way quiter, next up cleaning out the carbon from 160k miles :(.

Your turbo just work harder to compensate lost of pressure. MAP sensor send signal to ecu about pressure inside manifold, and if there is not enough, it just compensates with more boost from turbo. It means your turbo has a lot of free headroom for chip tuning also :) But main goal why manufacturers leave this headroom is expecially due boost leaks and comfortable driving if that happen, it prolongs engines, catalytics and etc :) Now imagine you chip tuned your car, allowing all potential from ur turbo to engine and then boost leak... Then ur engine stalling, vibrating, pulsating, you getting limp mode etc, because there are no more headroom lefted to compensate... The car trying to trim fuel, but fuel supply only can be delivered at real time measurments from sensors, so there is a big delay and car ecu cant store information to its memory :)

I think that in other It was with stock wheels. Does it means that wheels doesn't afect power?

More info on the E46 M3 please!🥰🥰🥰

Hey Misha, i want to come to the ring. But i dont now where to find tickets to do 1 lap at the ring.. can you help me out ?

6:32 they have to restrain the beast.

If it is closed loop management, it'll try to compensate for the leak

What is going to replace the Glanza?

If only my mechanics were as cool as George then i wouldn't mind taking my car to the shop lol smh. Lovely amount of bad jokes.

I'm most impressed that it didn't smoke at all even at full power. Now it can't be qualified as a proper slav tuning though :-)

Why not go for a big front mount intercooler?

George and his technical terms: "It's fucked..." Lol!

Wondering what the end result of the Golf will be like! It’s already crazy from where you started at stock. Will you do an overall cost video sometime or does it scare you to add the costs? ;)

Personally I prefer a front mount break cooler. I find the side ones tend to leak like yours.

Love Misha Nye, the Russian science guy videos!

the boost leak was minimal it seems.

What's the engine ?

Black velvet golf power

so the installer did the damage to the fins look just before he cuts the straps off everything is clean

How much extra does it cost to get someone to pre-dent the intercooler?

I laughed at your joke misha lol

Ti si iz hrvatske?

Better reliability = performance gains :)

I've got intercooler issue.. - nope it's f*cked :D LOL

Viele machen in die Radhausschale hinter dem Ladeluftkühler ein Lüftungsgitter vom Q7. Das ist genau so groß wie der Ladeluftkühler und die Luft sammelt sich nicht mehr dahinter.

Should of gotten a larger side mount you can get them cheap. Unless your going front mount when you build your motor

Will there be a video explaining what happend?

the stock intercooler is very undersized. not enough for stock tdi.

RIMAC ON NURBURGRINGGGGGG

how do you rate those Toyo T1R tyres?

Weten we dat ook weer dat het geen verschil maakt, zou je niet verwachten.

All the boost! Or a little less 🤷🏻‍♂️🤷🏻‍♂️😋

What the hell that rolls. How can you ever get something like that back together is beyond me

My mechanic didn't put anything back right after a serpentine belt change. One issue is they didn't bolt the intercooler back on with the two bolts at the top, one of the bolts is still there. I can't get it to go into the threaded metal holes and it's a standard bolt, but online I've found it's supposed to have a taper, is that right? Can it be done with the standard bolt? Thanks. Update: I found the bolt at the hardware store: M6x30 1.00. The one in there was an M8. Fucking idiots.

Shover caps for ears

I don't think 132 whp equals 143 flywheel hp, the losses are greater than 8%

You didn’t bleep hayyyyy!

How much power can you gain from fixing a leaking radiator?

If it runs cooler than you can maintain peak performance longer. At least that is what she said.

Tell George, The shower caps is not to that head. If you get it

Turbo, clutch, IC and pipes, exhaust, cams and injectors, you will be around 300bhp easily

You should have put a better IC, that will be leaking soon, they dont handle much power

How does fabt own a rolls at his age? He’s early early 20’s I assume?

why not just put a full front mount, cheap way to make power

My intercooler is full of oil..Same car..preety difficult to remove it at home from what i see

black velvet is a good song. don't know who sings it.

Trebali ste da uzmete ASZ ili ARL da se zajebavate sa velikom snagom. Nije ovaj za to.... :) ni motor ni menjac...

So to be clear. When you found a problem in the car you go to a shop a fix it? Nah! which planet you live at? :P In Argentina, still in lockdown for 5 months, I got my bike park outside. Collecting dust and flat tires... easier to sell xD

how are people supposed to click all notification when it isn't available lol

Fubar!

Gg

Alannah Myles will be chasing you for royalties 🤣 Spelt Myles incorrectly

En castellano por favor

First