Leaks problems on boiler piston DeLonghi Magnifica

Рет қаралды 25,332

Milen Stoitsev

Күн бұрын

Some of the most frequently occurring leaks from the boiler piston.

Пікірлер: 19

@christianocondo5179 3 жыл бұрын

Thanks for the video. I have replaced o rings on mine but I still get a jet of water squirting from around the inlet manifold and also out the drain tube into the grounds tray. I noticed the coil springs are very stiff. Difficult to push the piston in and out. Could that be the issue?

@jeane3809 2 жыл бұрын

great video～thank you for share

@DjTronk 4 жыл бұрын

Hi, one question: if the coffee is very good, but i see some water leak in the removable drip tray (the biggest, not the red and small one), could be this boiler piston problem? thank you in advance

@headlightking 3 жыл бұрын

Yeah, the yellow piston is overfilling with water... I’m investigating as to why. My thought is I have wrong size oring.

@DjTronk 3 жыл бұрын

@@headlightking The yellow piston in my case doesn't seems damaged. I have replaced all the old o'rings with all new o'ring but not with original, i took a replacement kit with all o'rings (15 more or less) on Amazon. looks well, but some water leaks...

@latechno9 7 ай бұрын

Здравей от София ли си?

@kef103 6 жыл бұрын

So no water should be in the clear yellow piston?

@headlightking 3 жыл бұрын

That’s my question!

@rozaliaroz3475 2 жыл бұрын

Thansk very mach. ❤❤❤❤❤❤🤗🤗🤗🤗🤗

@1000piva 7 жыл бұрын

Thank you for the video. If you will be able to help. I have problem after cleaning piston. During descale program or just when I want hot water, water comes from steam pipe, which is normal, but I when I opened a door during process, I noticed that water also drip a lot from the bottom of the piston. In every pump interval for hot water or descale program I see water drops from the holes in piston, and it is a lot of water, what after lead to large amount of water collect in the drip tray, overfill, and finally water leak from the bottom of machine. Do you have an idea?

@milenstoitsev6676 7 жыл бұрын

The cause of the leak from the bottom of the piston while using the steam valve may be because there are accumulation of limestone in mushroom valve which is located in the piston. Sometimes after cleaning with descale detergent limestone particles cause these problems they get in the wrong place and prevents mushroom valve from fully closing.

@miodragsubic5833 7 жыл бұрын

Milen Stoitsev I understand. I will dissasemble it again, and put some silicone grease on it. That should seal those litle cracks. I tought that I overscrew the main bolt (screw) from behind. Thank's for advice. Greetings from Serbia

@katugali 7 жыл бұрын

I have the exact same problem. Did you figure out what was wrong?

@violaopara2376 6 жыл бұрын

Hi I have this Same issue. Currently des along my machine. Will see if it gets better after.

@krasimirpishanov8979 5 жыл бұрын

@@milenstoitsev6676 здравей, имам проблем с моят philips който всъщност е чисто делонги. проблема е имам някакъв теч когато прави кафе, но немога да разбера от къде. водата се изтича във ваната , вътре при групата както и отзад при помпата няма течове. изтича по някакъв канал под чучура за вода. от къде може да е теча

@wildcountrygem06 5 жыл бұрын

How much should this cost to get done

@headlightking 3 жыл бұрын

I could do it. 150$

@TheKeepingitrealgirl 6 жыл бұрын

Are you able to email me? I have the delonghi that leaks. And I love it. I can’t find anyone in CA that is great at working on them. The place in San Francisco was an hour and 1/2 from me closed. I’d be willing to ship it to you, and pay you via PayPal? Message me

@milenstoitsev6676 6 жыл бұрын

Hello unfortunately I live in Bulgaria.