Learn about Griffin Natural Silk Bead Cord for pearl knotting. Ft tips & tricks, DIY beading advice!

Рет қаралды 10,512

3 жыл бұрын

Shop the full selection of Natural Silk Beading Cord 👉 www.eurekacrystalbeads.com/gr...
See All Griffin Bead Cord Here 👉 www.eurekacrystalbeads.com/gr...
Shop All Beading and Jewelry Tools and Supplies Here 👉 www.eurekacrystalbeads.com/je...
Leah will explain to you the best ways to use natural silk cord for knotting plus tips and tricks for how to make a successful beaded pearl necklace or bracelet. Learn everything you need to know so you can get started making beautiful things today!
#griffinbeadcord #makebeautifulthings #eurekacrystalbeads

Пікірлер: 37

@shellykearney7821 3 жыл бұрын

Very helpful, Thank you for sharing.

@EurekaCrystalBeads 3 жыл бұрын

Thanks for watching!

@kathyfriedman571 3 жыл бұрын

Great demo!

@EurekaCrystalBeads 3 жыл бұрын

Thanks so much!

@terranasauruss Жыл бұрын

Thank you. Exactly what I was looking for.

@EurekaCrystalBeads Жыл бұрын

Glad I could help!

@peggyschott2879 3 жыл бұрын

Great information and tips 😊

@EurekaCrystalBeads 3 жыл бұрын

Glad it was helpful! 💗💖

@BabySquirrelBeading 3 жыл бұрын

I'm so glad you explained everything so well. I've been doing workshop for making malas. It's a big issue trying to get the cord through semi precious gemstones when it's folded over to go through the eye of the needle. Awesome! 💜

@EurekaCrystalBeads 3 жыл бұрын

Glad it was helpful! It can sure be tricky at times. Thanks for watching 💜

@winnifrednelson7957 Жыл бұрын

Thanks for this very informative video. Also, "wiggleage" is my new favorite word :)

@EurekaCrystalBeads Жыл бұрын

You are so welcome! Lol!

@nishkam4726 3 жыл бұрын

Cool thank you!

@EurekaCrystalBeads 3 жыл бұрын

Thanks for watching! 💖

@A._.A._. Жыл бұрын

Hi, can you please make a video regarding how to join extra Griffin cord to another when 2m proves to be too short for the project?

@poetrychai6265 9 ай бұрын

So needed this video when I opened my Griffin bead cord as it seemed I must undo all the thread so that I could preserve my needle... Which indeed was the case. So helpful, thank you!

@EurekaCrystalBeads 9 ай бұрын

You are so welcome!

@Colours-dl3nu 9 ай бұрын

Really hoping you can advise me how to ensure the knots at the end of a tassel could be secured... I'm using the griffin nylon. It's a beaded tassel not a fabric one. So just the final knots at the end and the stray ends... Wish I could show you a picture.

@EurekaCrystalBeads 9 ай бұрын

Are you on Facebook? You can join our beader's group, The Beader's Nook and post your photo and question there! It's a great community of beaders from all over the world and we all love to help with beading and design questions!

@sherroniopa6274 3 жыл бұрын

I needed info on silk sizes. Thanks!

@EurekaCrystalBeads 3 жыл бұрын

Happy to help!

@florak1087 Жыл бұрын

thanks for this video. I just was going to retread a necklace that I previously finished on one side (necklace was divided and only one side broke and now the other did too) > I knew I had enough thread left over but I had a hell of a time because I cut off the wire end...arghhhh! Back to the store and lesson learned.

@EurekaCrystalBeads Жыл бұрын

Oh no, that's the worst 😖 Jewelry making really has a tendency to try our patience!

@bellagemajewelry Жыл бұрын

THANKS

@EurekaCrystalBeads Жыл бұрын

You're welcome!

@SpectrumShergie Жыл бұрын

How do you finish the end of silk on a sliding bracelet

@EurekaCrystalBeads Жыл бұрын

Hi there! I am not sure I understand exactly. Can you elaborate?

@dianneschussler6711 3 жыл бұрын

I am really confused. Isn't #3 (0.50mm) cord thinner than #4 and #6, or am I missing something?

@leahwyckoff4791 3 жыл бұрын

Nope, you're not missing anything Dianne! You know when you think & know something and then the wrong thing suddenly comes out of your mouth? That happened!! (eeep!) Thank you for pointing out the error! We've edited the video to remove the confusion and we'll film a follow-up video that goes more in depth into the sizes at a future date. We have the smartest viewers! ;-)

@dianneschussler6711 3 жыл бұрын

@@leahwyckoff4791 I understand perfectly, it happens to all of us at one time or another. Thank you for the clarification :)

@pamelajeanunlimited 21 күн бұрын

Hi! I've been using this cord and have now had 2 necklaces break in the center where I hang a light weight pendant or arrowhead. Any suggestions? Go with thickest cord?

@EurekaCrystalBeads 21 күн бұрын

Thanks for the comment! Arfe you able to take a look and see what was next to the spot where the cord broke, and what does the break look like? Sometimes, even just a bit of sharp edge can slowly saw through cord, and silk cord is made of hundreds of tiny delicate threads, so togethery they are very strong, but each individual one is quite fragile. Could this be what happened?

@pamelajeanunlimited 21 күн бұрын

@@EurekaCrystalBeads I think so. The arrowhead had wire so I revised that and used something less sharp to touch the cord. I also wasn't using the Griffen brand, an off brand, but 100% silk. This other necklace just had a pendant, not sharp. And both pieces broke in less than 2 weeks. 😭

@EurekaCrystalBeads 20 күн бұрын

That definitely shouldn't happen! Meanwhile for these particular pendants how about trying a different necklace material? Leather cord or perhaps even a thin Griffin cord but with beads on it?

@pamelajeanunlimited 20 күн бұрын

@@EurekaCrystalBeads I bought thick, wax coated, polyester last night and wrapped heavy pieces! 🙏