Learn How To Undercoat and Prime your Warhammer Miniatures

Learn How To Undercoat and Prime your Warhammer Miniatures | What is Zenithal Highlighting?

Рет қаралды 47,193

Жыл бұрын

Learn How To Undercoat and Prime your Warhammer Miniatures | What is Zenithal Highlighting?
In this tutorial I show you how to Spray Undercoat and Prime your miniatures so you can get them ready to play Warhammer 40,000
This is an easy to follow guide that uses Citadel products to achieve fantastic looking miniatures, even if you’re new to the hobby.
Here on TableTopReady, it is my goal to help you to become a better miniature painter no matter what skill level you're starting from. All my tutorials are beginner friendly and I explain in detail the techniques I use in my videos and let you know what products I use along the way.
You can support the channel by becoming a member or joining my Patreon:
PATREON - / tabletopready
Both give you access to my tutorials early, you'll see what I get upto behind the scenes
OTHER VIDEOS YOU MAY BE INTERESTED IN:
Get started with Painting miniatures • How To Get Started wit...
Get your miniatures ready for painting • How To Build Miniature...
How To Paint Ultramarines • How to Paint a Warhamm...
How To apply transfers • How To Apply Transfers...
PATREON - / tabletopready
WEBSITE - www.tabletopready.co.uk
INSTAGRAM - tabletopr34dy
CONTACT ME - contactus@tabletopready.co.uk
GET YOUR SPACE MARINES HERE:
www.firestormgames.co.uk/spac...
GET YOUR ORKS HERE:
www.firestormgames.co.uk/orks...
GET YOUR CITADEL BRUSHES HERE: www.firestormgames.co.uk/pain...
GET YOUR CITADEL SPRAY PRIMERS HERE:
www.firestormgames.co.uk/pain...
GET YOUR CITADEL BASE PAINTS HERE:
www.firestormgames.co.uk/pain...
GET YOUR CITADEL LAYER PAINTS HERE:
www.firestormgames.co.uk/pain...
GET YOUR CITADEL SHADE PAINTS HERE:
www.firestormgames.co.uk/pain...
GET YOUR CITADEL CONTRAST PAINTS HERE:
www.firestormgames.co.uk/pain...
GET YOUR CITADEL TECHNICAL PAINTS HERE:
www.firestormgames.co.uk/pain...
CITADEL TOOLS:
www.firestormgames.co.uk/pain...
OTHER PRODUCTS I RECOMMEND:
Tamiya Extra Thin Cement: amzn.to/3s3h1vW
Paint Rack I use to store Paints: amzn.to/3lNZWVx
Drop bottles small for citadel paints: amzn.to/2VKrEI1
Drop bottles Large for citadel shades: amzn.to/2X6XW0i
AIRBRUSH EQUIPMENT I USE:
Airbrush and compressor: amzn.to/2VADhl9
Portable Spray Booth: amzn.to/2VMkJy9
Airbrush cleaning kit: amzn.to/3CBQWbZ
Airbrush cleaner: amzn.to/3fSB2QV
Airbrush thinner: amzn.to/3s6NdhN
Flow Improver: amzn.to/37ywqLm
LIGHTING:
Lamp: amzn.to/3xMggZz
Bulbs: amzn.to/3yDZNrl
DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content
I REALLY APPRECIATE ALL THE SUPPORT AND COMMENTS AND IF YOU WANT TO JOIN ME ON MY JOURNEY IN GROWING THE CHANNEL, MAKE SURE TO SUBSCRIBE

Пікірлер: 152

@topponder7250 Жыл бұрын

cleaning my first models (Assault Intercessors & Paint Set) as I watch these videos. Good info, good presentation

@TableTopReadyYoutube Жыл бұрын

ooo exciting. I hope you've been enjoying it. good luck :D

@thazell8901 Жыл бұрын

Really useful video, and I love all the transitions and title cards you've done. Makes it look really slick!

@TableTopReadyYoutube Жыл бұрын

Thank you, I've worked hard to make sure my tutorials are full of as much information as I can give, including visually as I understand people take in information in all different kins of ways

@griffinsprague-dixon3131 Жыл бұрын

I've gone through at least 4 of your videos so far and I'm excited to try all the techniques I've seen so far to my models!! 10/10 would recommend haha

@TableTopReadyYoutube Жыл бұрын

brilliant, I'm glad I can help in some way to help you get better at painting. just make sure to take your time learning the process and building that confidence

@soundgarden8885 Жыл бұрын

<a href="#" class="seekto" data-time="321">5:21</a> and here is where the new yellow contrast paints come in.. have you tried them yet Michael? They are absolutely amazing. Never before was there as you said a way to get a solid yellow over a dark undercoat.. this works like a dream, and the finish is extremely smooth and matt!

@TableTopReadyYoutube Жыл бұрын

Really? I’ll Have to check this out 🤔

@george2408 11 ай бұрын

If you look after your models you don’t need to use much. It’s not worth the risk of clogging up details. A very very light spray is enough. Also zenithal with spray cans is more than likely going to clog up details especially for someone inexperienced with spray cans

@SoMrStewart Жыл бұрын

Hey 👋 just found your channel, good job dude , very helpful stuff and love the layout of your videos with the little paint pots on the side showing what colours etc , keep up the great work

@TableTopReadyYoutube Жыл бұрын

Thank you so much, welcome to the channel, I'm glad you like my content enough to subscribe and stick around, it means a lot :D

@warlocksunited2e580 Жыл бұрын

Please do a black legion tutorial

@fernandozavaletabustos205 Жыл бұрын

Another great video as always!

@TableTopReadyYoutube Жыл бұрын

thank you :D

@kristenwalsh6702 Жыл бұрын

Thank you for the help

@WhityRancaguino Жыл бұрын

very good video , thanks for all the tips , i can use more efficient my resources.

@TableTopReadyYoutube Жыл бұрын

Awesome, I’m glad I could help

@notmenotme614 5 ай бұрын

The colour of the primer makes a massive difference, I really struggled to paint yellow over black primer. Instead wraithbone primer works better with yellow armour. The temperature of the primer can makes a difference, if it’s too cold or too windy or humid outside, then the primer can end up being to blotchy or grainy. A friend said you should stick the primer can up your jumper for 10 to 15 minutes so your bodyheat warms the can up. I take it a bit further my relaxing under a duvet with the primer can to warm the can up while I watch a few KZfaq vids. Another way of doing zenithal highlighting is to use a rattle can of black primer then dry brush a small amount of white or grey paint over the raised areas of the model.

@sludgedisciple Жыл бұрын

I appreciate the info on Zenithal.

@TableTopReadyYoutube Жыл бұрын

I was going to do a video dedicated to it, but I don’t really use it very often and there’s better people out there to learn about it from. But I’m glad I included something about it, just so people know it exists 👍🏻

@MrTpimms Жыл бұрын

Michael, loving your work as ever mate, the production quality continues to improve with every video, keep up the awesome work!

@TableTopReadyYoutube Жыл бұрын

Thank you :) I'm glad you're still watching them haha that's a good sign

@MrTpimms Жыл бұрын

@@TableTopReadyKZfaq I have been keeping up with all of them. Not done any hobbying for ages as been really struggling with mental health issues. Hoping to sell my stuff I’m not going to work on and get some chaos knights with the proceeds. I think fewer models that are more ‘special’ will be less daunting that the Guard and Ork kits I’ve got currently!

@MrTpimms Жыл бұрын

If you wanted any for your tutorials 🤣

@petermealing6839 Жыл бұрын

Well done!! Love the introduction of a little bit of humour.

@TableTopReadyYoutube Жыл бұрын

thank you :D

@adamduncombe594 Жыл бұрын

Yes. Great video

@TableTopReadyYoutube Жыл бұрын

thank you

@justinkotrba2197 Жыл бұрын

Love the Warhipster Cameo!

@TableTopReadyYoutube Жыл бұрын

haha I did as well

@kaytigraham2413 Жыл бұрын

I almost exclusively use Vallejo Black airbrush primer with no zenithal. The only time I use a zenithal is on a detailed mini where the detail can get lost in a sea of black. However if I’m going for a retro eavy metal paint job then it’s a very light grey almost white primer. I feel this really makes the colours a lot more vibrant.

@TableTopReadyYoutube Жыл бұрын

I feel zenithal is a style choice and you defiantly need that bright undercoat for a retro easy metal feel

@cgs7226 Жыл бұрын

Thanks!

@TableTopReadyYoutube Жыл бұрын

Thank you so very much for your donation, it really helps and I'll be using it to purchase the Black Templars :D

@stemes2860 Жыл бұрын

Bought the new white scar yesterday and its fantastic

@TableTopReadyYoutube Жыл бұрын

the new white scar really impressed me

@kristenwalsh6702 Жыл бұрын

It is really good now that you help me

@TableTopReadyYoutube Жыл бұрын

I’m really glad your enjoying my content 😁

@thehonestaspy102 Жыл бұрын

Thank you so much for the helpful guide, I've been having real trouble spraying since coming back to the hobby as the spray seems to instantly dry on and go on far lighter but the video was really helpful

@TableTopReadyYoutube Жыл бұрын

Spraying can be difficult and even now I don’t always get it right. You just have to do everything you can and hope for the best 😋

@thehonestaspy102 Жыл бұрын

@@TableTopReadyKZfaq thank you for the encouragement, everyone else always seems to get it perfect I was worried it was a me problem 😅

@WICKEDJungles Жыл бұрын

Exactly what I was looking for! Thanks. :) Could you also show us, the best method of stripping/getting rid of the paint of old minis?

@TableTopReadyYoutube Жыл бұрын

Glad you liked the video. I’m probably not gonna do a video on stripping as I don’t really do it. I’m sure there’s lots of articles and videos already that show you the best way of stripping models

@pointandshootvideo Жыл бұрын

Very comprehensive tutorial - Thank you! I've never seen anyone do a zenithal subassembly tutorial. I'm thinking it may not possible to get the correct effect. Perhaps "tack" assemble and then disassemble? Might be something interesting to try. Cheers!

@TableTopReadyYoutube Жыл бұрын

tacking the miniature together first is actually a really great idea. I hadn't thought of that, maybe that's why you ain't seen one yet ha

@darsin7860 9 ай бұрын

Well done

@TableTopReadyYoutube 9 ай бұрын

Thank you :)

@sonofruss334 Жыл бұрын

i'm just got into 40k, and bought Space Wolf CP for starter, i use black primer for my model, and its irritates me when i want to paint the shoulder pad with yellow color, now i know why lol, thank you so much for your vids, it help me a lot in my painting journey

@TableTopReadyYoutube Жыл бұрын

That’s why I make these tutorials, so I can actually teach people how to paint 😃 I hope painting your yellow pads is less frustrating from now on 💪🏻

@songohan1075 Жыл бұрын

I undercoat my Cadians with Zandri Dust Spray, after spraying I use Zandri Dust from the pot and go with one thin coat over the uniform for a smooth finished.

@TableTopReadyYoutube Жыл бұрын

That’s a great undercoat colour to use for Cadians and I used it in my tutorial, I did run out of it though 🤦🏼‍♂️ but I agree with your choice and approach to painting the uniform 😃

@flamingoflame Жыл бұрын

Awesome vid. I ran into some drama recently attempting Zenithal - because I was scared to cover the model too much I wasn't holding the nozzle down firmly enough so there's load of sputtery dots all over them now. Having to correct with a brush before I add the contrast paint

@TableTopReadyYoutube Жыл бұрын

Hopefully it works out better for you from now on 💪🏻 zenithal is tricky

@tien65 Жыл бұрын

for me it has always been grey seer. However i recently started using the new white scar spray can, i feel like its smoother on the model.

@TableTopReadyYoutube Жыл бұрын

this was the first time I used the white scar spray and I was very impressed with it. I still love wraith bone but white scar is now a contender

@user-yn3kq4bn5t Жыл бұрын

🔥🔥🔥

@stonkotron319 Жыл бұрын

Could you please do a tzeentch tutorial one day. I got the start collecting box because I love the lore of tzeentch and I want to paint them like the box art.

@TableTopReadyYoutube Жыл бұрын

I thinking of doing more chaos tutorials towards the end of the year and no doubt will include Tzeentch

@Benandkyoko 2 ай бұрын

I had no issue with using sprays in the winter, but it just got a lot drier and hotter here in Japan and I did some of the new tyranids from the ultimate set... I wish I had not. The models themselves have too many small details and the spray clogs it even if you are careful. For that range of models, I will not use a citadel spray again for the base. A very light primer from a different company may be fine. Citadel base spray... no don't use it in temperatures above 26 degrees. It just dries too fast and leaves terrible detail damage.

@sanguinius6815 Жыл бұрын

I like black for general use and an off white (ushabti bone? I think) for models with brighter colours.

@TableTopReadyYoutube Жыл бұрын

Wraithbone spray is the off white colour. I very rarely find myself using black now. I’m just a big fan of bright colours I recon. Thanks for the comment 😁

@darrylking748 Жыл бұрын

Love your videos! Would love to see a black Templar tutorial

@TableTopReadyYoutube Жыл бұрын

It’s coming

@darrylking748 Жыл бұрын

@@TableTopReadyKZfaq thank you. I just joined your patron; I wish I had this content when I was ten.

@TableTopReadyYoutube Жыл бұрын

Brilliant. Thank you so much 😃

@bluedotdinosaur Жыл бұрын

If you're in a position where you can't spray for whatever reason, I have long felt Stynylrez primer from Badger is the best brush-on primer - at least black and grey. White still needs to be airbrushed for effectiveness. The other two however, go on incredibly well with a brush and harden to a perfect surface.

@TableTopReadyYoutube Жыл бұрын

Some good advice 👌🏻

@The80sWolf_ Жыл бұрын

I guess it works also to spray black, and then sligthly drybrush the model with white from above?

@TableTopReadyYoutube Жыл бұрын

Absolutely 💪🏻 lots of different ways. I don’t really do it myself so if you want to learn more I’m sure there are videos out there dedicated to it 😋

@MorrowindES17 2 ай бұрын

I haven't bought them spray cans in over year scared in case i mess one up but i do like them so especially white and black.

@TableTopReadyYoutube 2 ай бұрын

its worth tryng out :) the white and black sprays are pretty easy to use in my experiance. pratice on something your not fussed about first :D good luck

@MorrowindES17 2 ай бұрын

@@TableTopReadyKZfaq Thanks i will buy them when i am next in the shop model shop.

@MorrowindES17 2 ай бұрын

@@TableTopReadyKZfaq Yes was tempted to use spry can on my age of sig mar set too speed things up

@daniellukacs8792 19 күн бұрын

Hello There! Following up from the Tau commander video i checked out this one and following step by step i've managed to get the result that you have at <a href="#" class="seekto" data-time="230">3:50</a>, the problem is that my primer partly came off from a slight touch which i presume is because the paint itself is faulty since i've painted at 20 C after 3 minutes of shaking and 1 hour of drying. Also i've wanted to ask did you sand the white miniature between <a href="#" class="seekto" data-time="230">3:50</a> and <a href="#" class="seekto" data-time="280">4:40</a> or something? It looks a lot better then after priming.

@TableTopReadyYoutube 16 күн бұрын

Those are 2 different miniatures but both were undercoated the same. I'm not sure about the paint issue

@gabrieldarkwind5866 Жыл бұрын

What do you think about cheaper aftermarket sprays or sprays from normal paint shops, are they acryl or oil based, there's is not much info on cans. In most cases they are universal for wood metal and plasti materials and they cover very nice but I'm not sure about paint sticking to them.

@TableTopReadyYoutube Жыл бұрын

If you're going to look into different sprays, you'll want to make sure they are either acrylic or they will say primer on them, other wise you'll find they're lacquers. I know people use Halfords sprays

@MrScrawnjuan Жыл бұрын

Missed opportunity to say spray from about the length of the ruler away 🙃 I use a lot of Gold Retributor Armour spray, but that's for my Thousand Sons trim

@TableTopReadyYoutube Жыл бұрын

haha I was originally but I didn't know how universal rulers actually are. I told myself maybe they're different lengths

@zebr Жыл бұрын

What primer would you recommend for Goff Orkz? I've seen you use a variety of primers for Orkz and I'm trying to narrow my decision and not overthink it too much. New to painting in general so I'm trying to do it right

@TableTopReadyYoutube Жыл бұрын

it's really a personal choice on what you prefer working over. honestly I tend to use what I have at the time. so I have Orks undercoated leadbelcher, wraithbone, grey seer etc etc. I do tend to stay away from chaos black though, I like a good midtone or light colour. I would use chaos black for vehicles and things like mega knobs if they have a lot of black armour.

@OrcSmithz Жыл бұрын

Have you tried using Zandri dust for basing etc?

@TableTopReadyYoutube Жыл бұрын

I’ve used zandri dust personally and I’ll be using it in a Cadian tutorial next month. I’m a big fan

@terlondre Жыл бұрын

....and no matter how bad one fails at painting, he can always spray it over with chaos black and call them Black Templars, Ulthwe, Black Legion,..... and wrap it up Nice video :) personaly i stick with grey seer. It is sort of in the middle and after using it for a while, i know what to expect when applying colors, so its more of a habbit than a preferance

@TableTopReadyYoutube Жыл бұрын

Thanks 😃 I’m in the habit of using wraithbone. I like that creamy off white colour. I recon people like certain colours because they prefer how the different paints look on it

@Rookie40K Жыл бұрын

Are all the sprays from GW primer? Are they as durable as other sprays labeled as primer? If not which ones are? Thanks.

@TableTopReadyYoutube Жыл бұрын

all the citadel sprays can be used as a primer. they're just different colours. I probably use the different colours more than the basic colours and I've never had a problem with spraying them straight onto plastic

@dante4117 Жыл бұрын

I use GW mechanicus standard grey as my base primer. How and what color would be best to use to zenithal highlight over it?

@TableTopReadyYoutube Жыл бұрын

It’s not gonna be much different to be honest. I would still use white and follow how I do it in the video 👍🏻

@robertrice347 Жыл бұрын

I may have missed this, but how do you safely attach your pieces to the wood to set them up for spraying? I’m trying to avoid damaging the plastic.

@TableTopReadyYoutube Жыл бұрын

I do have a building and getting miniatures ready for painting tutorial that shows you how you could do it. I’ll either use blu tac or super glue.

@MorrowindES17 7 ай бұрын

Questions What are those big dropper bottles on your work bench? you have never seen them before.

@TableTopReadyYoutube 7 ай бұрын

I transferred paints and mediums into them. I regretted it and no longer do it. It’s a waste of time

@MorrowindES17 7 ай бұрын

@@TableTopReadyKZfaq good idea

@Rookie40K Жыл бұрын

“Did you say contrast paint?” LMAO!

@TableTopReadyYoutube Жыл бұрын

he did a great job haha

@gravastar241 Ай бұрын

I’m having trouble applying my retributor armor, it either doesn’t come out in the gold that I want, but rather some times a sandy looking color, I live in Florida so the temperature barely goes down below 80

@TableTopReadyYoutube Ай бұрын

if your making sure its shaken and follow other advise from the video then its likely the florida temperature. maybe teres a cooler time of the day? the issue with high temperture is the paint dries and evaperates more quickly when it leaves the can so you'll find your just getting dry paint on your miniature. try spraying a little closer to your miniature and use less frequant bursts as you spray

@GaudiaCertaminisGaming Жыл бұрын

I use Pebeo Black or Vallejo Grey but neither stick to my models that well. I’ve tried washing with soap and water and also with alcohol but the results have not been great, though acceptable.

@TableTopReadyYoutube Жыл бұрын

I'm gonna assume these have been mixed with thinners or are they spray based? if you are mixing them with thinners, sometimes the thinner can effect how that primer performs, especially if its a different brand. I know Vallejo doesn't work very well with Mr Hobby for example. the Vallejo thinners are pretty universal though. I know AMMO do airbrush ready primer. if they are sprays then I'm not sure why that is

@dittmar104 Жыл бұрын

@@TableTopReadyKZfaqmy valejo airbrush primer comes out really wet and just runs off the models

@jonaso680 Жыл бұрын

Im new in the hobby and having a hard time getting a clear answer to whether a "primer" and an "undercoat" is the same? - Im going to paint orks and want to use wraithbone, but it is labled as "contrast undercoat". Do i need to use something labled as "primer" under it? Or is it the same thing? (I have gone through countless reddit threads and keep getting mixed answers)

@TableTopReadyYoutube Жыл бұрын

An undercoat and primer both do exactly the same thing. People just like to get high and mighty about things. Wraithbone is a great undercoat to use. I use it myself 👍🏻

@jonaso680 Жыл бұрын

@@TableTopReadyKZfaq Thank you! - Your videos do a great work at explaining for newcomers like myself!

@mancman-bu4kz 2 ай бұрын

New to all this so what spray use for marines if plastic is blue?

@TableTopReadyYoutube 2 ай бұрын

You can use the same spray. The colour of the plastic doesn’t change anything 😁

@mancman-bu4kz 2 ай бұрын

@@TableTopReadyKZfaq cool cheers

@mcdoogle_robotman Жыл бұрын

I've been priming my minis on the Sprues is that fine??

@TableTopReadyYoutube Жыл бұрын

I always say do things the way you want to do them. I would recommend against priming on the sprue though as you'll have to cut the parts off and then clean up which can make priming pointless as you'll probably remove it in the process. I have a building and getting your miniatures ready for painting video that could help you out

@cqb_7075 3 ай бұрын

So can I just prime the kit after glueing everything

@TableTopReadyYoutube 3 ай бұрын

yes you can

@mr.kashoroki6607 Жыл бұрын

Dam yu are so good at painting can y please do a runtherd and gretchin painting tutorial plzzz You would be a god

@TableTopReadyYoutube Жыл бұрын

I’ll add it to the list

@mr.kashoroki6607 Жыл бұрын

@@TableTopReadyKZfaq OMG thxxxx so much

@ReeceyJC Жыл бұрын

Can you please do a tutorial on how people get those pinky/purple/red chaos that I see in all the battle reports, it's so nice but mine always just look like power rangers...

@TableTopReadyYoutube Жыл бұрын

Which battle reports 🤔? I’m not sure I’ve seen these

@ReeceyJC Жыл бұрын

@@TableTopReadyKZfaq I believe it's a few of the Chaos Space Marine battle reports on "Play on Tabletop's" channel :) Adeptus Mechanicus vs Chaos Space Marines and First Game of 40K! Chaos Space Marines vs Ultramarines are two that use the really nice colour scheme for sure!

@kristenwalsh6702 Жыл бұрын

I have a starter set but I don’t know what to do

@TableTopReadyYoutube Жыл бұрын

I’m guessing you have now seen my getting started painting miniatures video now? If not make sure to check that out and it should get you started 😃 good luck

@galan8115 Жыл бұрын

As i have stated with numerous tutorals like this. Can you do a version for priming multiple units at the same time? Cause hrde armies cant afford to go one by one xD

@TableTopReadyYoutube Жыл бұрын

Just get something bigger to stick more things to? The way to spray them is the same, your just spraying more miniatures. If you really doing a lot and want to do them quickly then don’t build them in sub assemblies. But everything I do is the same when I spray a larger amount of minutes as well.

@horuslupercal2385 Жыл бұрын

If you're doing large numbers of minis, best to assemble them all in full and blu-tack them onto 1 side of a rule/long stick (you could literally do 4-8 in a row) and spray them all together. Might need to separate them and finish off spraying each of them into the more concealed sides/underparts, but you could easily spray a large unit of models in the space of an afternoon.

@jameswatson1951 Жыл бұрын

One thing that I never see talked about is those hard to reach recesses/places. I always spend an hr or so on a unit afterwards getting those places by hand. Otherwise if I try to do it using the spray can it goes on too heavy and ruins the model. Does anyone else have this problem?

@TableTopReadyYoutube Жыл бұрын

honestly, I never manage to get every nook and cranny, but I find the over spray tends to be good enough and you're able to paint on on it regardless :D

@jameswatson1951 Жыл бұрын

@@TableTopReadyKZfaq thanks, sounds like I’m spraying the right amount then. I usually have this issue more when my base coat is the same colour as my primer so need it all fully covered. I find a wash or contrast though tends to cover any small areas I’ve missed. Because of this sometimes I do feel I waste a bit of time getting it fully covered before my wash/contrast so still experimenting with what’s best. The one thing I really want to avoid though is over spraying and losing detail. I tend to struggle with this a bit when spraying. Probably wouldn’t be such an issue with an airbrush. Great video!

@jacobbragg9958 11 ай бұрын

Anyone else having a hard time getting leadbelcher to cover properly? Tried priming my dreadnought and all i get are speckles of metal and clogged details. I did prime it with mechanicum grey a month or so ago and decided i didnt want to try painting all the metal with a brush. Not sure if its me or if leadbelcher being a metallic paint makes it more finicky.

@TableTopReadyYoutube 11 ай бұрын

The leadbelcher should behave the same as other sprays. If your finding it building up then try moving the can more as you spray in short bursts. Make sure it’s really well shaken. Less is more with leadbelcher as well.

@jacobbragg9958 11 ай бұрын

@@TableTopReadyKZfaq Thank you kind sir, I greatly appreciate you and your videos

@alderonsabbet7217 Жыл бұрын

I did that and it came out slightly gritty.

@TableTopReadyYoutube Жыл бұрын

this could be for a lot of reasons, its just gonna be a bit of trial and error. a lot of the time this is because the paint is drying too fast before it hits the miniatures. make sure its shaken and maybe spray a bit closer to the miniatures.I can only show you best practice

@STOOJIE Жыл бұрын

Grey or black or both

@TableTopReadyYoutube Жыл бұрын

I've not really tried grey, but I may give it a go now I have some

@STOOJIE Жыл бұрын

@@TableTopReadyKZfaq I prefer it to white, was surprised at how it can still lay down a zenythal but the highlights are not as stark when you start layering

@LaMOi1 25 күн бұрын

I prime my miniatures… I paint them. The paint just seems to scratch off so easy with my fingernail. Whereas, I’ve bought miniatures already painted off eBay, and they don’t look varnished, but you’d have to practically take some vapour to those suckers to get the paint off. I don’t understand where I’m going wrong ?

@TableTopReadyYoutube 20 күн бұрын

paint cures over time, I would just avoid scratching it with your finger nail :P

@LaMOi1 20 күн бұрын

@@TableTopReadyKZfaq lol… didn’t think of that…

@TableTopReadyYoutube 19 күн бұрын

yeah it dries fast enough to work with but it will need to continue to dry over a longer period of time ha

@leespiderpod 19 күн бұрын

I’d definitely use rattle can primer, the water-based ones aren’t as good imo. Once the mini’s finished I sometimes varnish them in water-based Vallejo gloss and then go over them with Vallejo clear varnish. If they’re going to be used a lot in games, this really stops the paint coming off. The gloss varnish is tough stuff!

@davesmith9844 Жыл бұрын

...there are better and cheaper options than citadel rattle cans. Even Forge World don't use em on resin.

@TableTopReadyYoutube Жыл бұрын

There are lots and lots. It’s all about doing a little research and finding one that you like to use

@jamesteaney4550 Жыл бұрын

This may mark me a heretic, but has anyone had success with non-Citadel spray cans?

@TableTopReadyYoutube Жыл бұрын

Yeah, there’s lots of different options out there. Just make sure to do some research before you dive in to the unknown

@LaMOi1 20 күн бұрын

Maxi colour - Robert Dyas. £5!

@Mordraqq Жыл бұрын

Dont use spray cans, safe money for an airbrush.

@TableTopReadyYoutube Жыл бұрын

That is an option 👍🏻

@MakeEmRageQuit Жыл бұрын

Citadel spray is NOT primer, it may contain some primer like a house paint does, but it is not a proper primer. Actual primer serves a real purpose. Also Priming and Undercoating are two different steps.

@TableTopReadyYoutube Жыл бұрын

This is worth knowing 👍🏻