Learn Studio One 6.6 | Get Rid of Clipping Errors!
Рет қаралды 498
28 күн бұрынIn this tutorial we take a look at several simple but effect methods of getting rid of clipping errors on our master channel and during song export. These are quick and simple methods for beginners who are not familiar with gain staging and mixing practices.
@quantaaudio 27 күн бұрын
Learn Studio One directly from Quanta in Zoom!!: quantaaudio.com/webtraining Download my 6+ hour course for Studio One 5.5: quantaaudio.com/store Like the Tutorial??? By me a coffee! www.buymeacoffee.com/quantaaudio
@grzegorzpiwowski890 27 күн бұрын
Great job💯👍👏 fantastic and I'm really glad that you back 👍You are one huge knowledge of this DAW 👌
@quantaaudio 26 күн бұрын
Thanks so much for watching and taking a moment to leave a message!
@Wizitch 27 күн бұрын
Nice work here. Another strategy I use for clipping and gain control is to activate the input controls (Mixer wrench icon under "Channel Components". Using a mix bus like you demonstrate here you can also use the channel input control to reduce the signal going to the main bus. I also recommend putting your main bus controls onto the Mixbus and only have the limiter on the main bus. Probably doesn't make any real difference but I find it easier to gain stager and level control this way. Hope this helps someone....
@quantaaudio 26 күн бұрын
Yes, indeed. I kinda wanted to talk about gain staging with the input gain controls in the mixer and making them visible, but I didn't want to overwhelm new folks with the many different options. As I'm sure you know, it can get very convoluted if you're just a beginner! Anyhow, thanks for watching and sharing insights. All the best.
@fridaymusic569 27 күн бұрын
Excellent tutorial as usual!👌
@quantaaudio 22 күн бұрын
Appreciate it, man! Thanks for watching.
@carstenaltena 25 күн бұрын
Off topic, but really cool beat!
@nriley1536 22 күн бұрын
A question: If you choose to reduce faders on all channels to eliminate clipping, should you likewise reduce the level(s) on any FX channels (e.g., reverb used as a send)? Thanks very much.
@quantaaudio 22 күн бұрын
By default, FX Sends are set up as "post fader". So, as you decrease the fader levels of all of your channels, this should also decrease the level going to your Send which will maintain the overall balance of your mix. IF you changed the setting of the Send to be "Pre-Fader", you'll also need to reduce the faders on the FX Sends at the same time your reduce all other faders. I hope this makes sense!
@nriley1536 22 күн бұрын
@@quantaaudio Makes perfect sense. Thank you very much for taking the time to answer my question.