the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzfaq.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

I came from MaCenna's video! You guys are seriously inspiring me to do my own cabinets!

Wes, you have got to be one the kindest gentlemen I've watched on KZfaq. So refreshing. Thank you for sharing your approach. May God bless you.

Hi Good Morning... XO Macenna brought me here... Absolutely worth watching as it is short and simplified but GREATLY informative! Thanks to both of you for inspiring others!

Hi, Wes! You taught XO MaCenna make her cabinet doors 😄👍

I also came from MaCenna's channel. I've been meaning to fix my cabinets. You two are an inspiration! I think maybe I can do it!

I’ve watched so many kitchen cabinet videos, this is the best! And Wes seems a very good communicator!

Two router tables would make life and this work very pleasant. The router table is very well done. Your experience really shows in this video. Thanks for sharing.

I’ve been woodworking for many years (50+) never knew the trick of making both rails and stiles out of one board. Thank You. Monte

How am I just now finding your videos?! AMAZING!!! No banter, all knowledge!!! THANK YOU!!!

MaCanna recommended your channel for making doors. I’m so glad she did, you explain each step . Thank you.

Great video. I wish i was your neighbour and pop in for a coffee and learn more cool woodwork tricks.

The tip about cutting the tile and rail edges before cutting them down to size is great. As you said, it's much easier to control a wide piece of wood. 👍

This guy is the "Bob Ross" of the woodworking world...

Hi Wes! I heard about your channel watching MaCenna's DIY channel where she raved about your cabinet making skills and how great a teacher you are and she was right. You're so easy to listen to and follow. Thank you so much for sharing!

The Mr. Rogers of woodworking. Absolutely enjoy your teaching method.

You’re a great teacher! If your were a high school wood shop teacher I’d think we’d have more cabinet builders! Im obsessed with door and cabinet building!

I appreciate the way you teach. It has helped me improve my skill.

Hey Wes! XO, MaCenna used this video to learn how to make her kitchen cabinet doors! She gave you a shout out on her video! You should check it out!

Wes, Thank you for this video. I feel much more confident in attempting to build these doors. Especially the router bit setup. Excellent detailed video.

Built a lot of panel doors but never thought of making both rails and both stiles at the same time and then separating them. I added dust collection to my router table and made a world of difference in cleanup and breathability. :-) Great video and great lesson. I particularly liked using the jointer for cleanup. Now I can build my vanity doors with greater ease and accuracy. Thank you. I subscribed in the first 2 minutes.

Hey Wes, I've watched 3 or 4 of your vids so far and I can't tell you how much you've taught me. You are an awesome teacher. You state everything so eloquently and make everything so easy to understand. Thank you so much my friend. I couldn't subscribe fast enough!

I’m thoroughly enjoying your video’s and I’m learning a lot, you keep things simple enough that everyone can benefit. We are thinking of remodeling our kitchen and with your videos I feel confident enough that I know we can do this. Thank you so very much!

Mr. Wes, you are absolutely amazing!! Your method and guidance are simple, straightforward with great craftsmanship. Thank you for sharing your God blessing carpentry work.

I watch a lot of woodworking youtubers. Just stumbled on this video. Now a subscriber. I wanted to tell you how much i enjoyed learning from you! Youre a great teacher, fantastic demeanor, and your style is very calming. I would have loved to grow up with a guy like you teaching me. We need more men like you teaching others how to craft. Keep it up, and ill keep watching! Prob my favorite channel now.

I really appreciate your meticulous explanations and you make it easy to understand thank you 🙏🏻

Thank you so much for the lesson..... I, really, appreciate this.

I'm a visual learner. This is the best video I have ever seen!!

You are so patient and sweet, Thank you for all your knowledge!!

Ripping the rails and styles after routing the profiles was a great tip! Thanks!

Loved your easy-to-follow instructions. Very fine work. When I bring in my hammer, I call it the "persuader". But encourager works, too. Thanks for making such great how-to videos.

Total newbie and wannabe woodworker here. I’ve seen so many videos on doors and this one is the best by far. Love the concept of making the stiles and rails double wide and then slicing them in half. So much safer that way!

You did my shop teacher proud. I am looking forward in see all your videos and giving them a thumbs 👍 up. Thanks you.

Great Video Wes! I really like how to let the video run and didn’t trim the video down to a few minutes. This way we get to see a lot of the detail work in the set up! Thanks!

We keep subscribing to people - but then we forget who is the better option to learn from - you are the master and your videos are not only "he look I can do it", but also here is how to do it - so it is precise to getting the steps right and getting a final product or learning from it. Thank you Wes. I am going to re-evaluate some of my other subscriptions.

Best tutorial on shaker doors I have seen!

Space balls...they're out of this world!!

Wes, you're the best cabinet maker I know. I love my kitchen and am so glad I got the easy cleaning surface. It was worth the wait!

Built my kitchen cabinets with those bits doors all mdf and even raised panels. The boxes made with white melamine. Turned out excellent with raised panels on coney ends.

Wes thank you for all your Insight. I'm glad there are still people out there with the love of woodworking and like to share the love of woodworking and not become advertiser. I really enjoy your videos please keep us in love with woodworking thank you.

Thank you for making this video. Really great quality. You’re a great teacher.

I appreciate deeply your reminder about "BE SAFE". It is very important professionals keep pushing this idea, to lead a solid, consistent change in our approach to woodworking. Beginners look these videos and it's a key moment to decide which habits to take: if fast & furious or proper & safe. Those habits will stay potentially forever. There are still lots of experienced workers around cheating with safety… and accidents keep on happening.

I have watched 30+ videos to find this answer. Thank you kind sir, your expertise is absolutely superb!

I like how well you explained, and demonstrated each step. I’ve watch a couple similar how to videos, yours was the best one. Thank you for your thoughtfulness

Great work finally found another senior that knows what he is doing may God Almighty continue to bless and keep you and yours safe. Totally outstanding.🙏🙏👍👍👍

This was a great video on making these doors, I can't wait to start mine.

That is a terrific tutorial on making doors! Sooo enjoy watching and learning by you! Regards from NZ!

Wanted to thank you for this video.i just built my form shaker door and turned out nicely.

Very good. Clear and informative. Good combination of basic shop-made and store-bought tools. One point: The frame and panel door was engineered, centuries ago before plywood and mdf, specifically to deal with expansion and contraction of solid wood. It's not just fancy woodworking.

This is such a nice video. Thank you for explaining everything with patience. It waa really insightful to watch the whole process. Thanks again!

Very informative and encouraging for us late starters thank you Wes

Love this guy!!

Outstanding job, Wes. I learned a few new things. Thanks for sharing.

I also came from XO MaCenna's channel. Love your teaching style Wes.

Love the way you make the larger size meterial before cutting it to width. I will now do that and also thanks for the jointer trick.

Great tutorial. Going to use this method on my next cabinet build as I am confident it will give me better results. Thanks!

Thank you Wes , very informative, thanks for sharing.

love your way of explaining things thank you

I love your videos! I have learned so much from you! You have inspired me to try new things. I have found, that I get a good router cut by making a really shallow cut first, then I make my final cut. I haven't considered using the jointer. Great idea.

Very thorough and so helpful. Thanks Wes!

Sr. Excellent job, Congrats!. Thanks.!.

You're such a perfectionists 🤭🤭🤭🤭🙌🙌🙌

You do a beautiful job of explaining what you’re trying to achieve and then how to get there. The end result is quality. Jointing the sides and then recutting the grove for the panel is a clever idea. We put that idea in the memory file. Very nice vid, thank you. From Missouri

Great video this was exactly what I was needing to learn, thank you!!

As a beginner this is the best video i found, many thanks Wes ;)

I built my first set of base and wall cabinets this past month and have about 15 more to go. I wish I had watched this video before as I feel that I need to go back to the existing ones and fix all the things I did “wrong” 😂😂 I’m very happy to be a bell-subscriber to this channel. I really enjoy your content.

I love to make 5 peace raise panel doors and cabinet ends. This video will help a bunch. Thank You.

Sencillo limpio y muy ordenado su trabajo muchas gracias por su enseñanza también muy didáctico

You are a good teacher thanks

I really enjoy the way you break things down

Perfect work. Very good explanation

Good job Charlie Brown, great presentation!!!

best demo ive seen thanks so much

thank you papa, nice shop simple tools and ideas lessons taken.

Wes nice job! You are one of a few woodworkers that mill the styles and rails first and then cut them apart. I always make my styles and rails 2" so a 1"x6" works perfect leaving less than an inch of waste but sure makes the milling much safer. That jointer trick is amazing!

Wes is awesome!! Thank you!!!

You make a good teacher. I learned a lot. Thanks

very intuitive, thank you sir👊

You sir have the heart of a teacher. Love your stuff

Mil Gracias soy aficionado a la carpintería no hablo ingles pero su clara explicación gráfica muestra sin error los pasos a seguir y en consecuencia lograr trabajo perfecto GRACIAS

Awesome demonstration, thank you sir!

i'm enjoying your all video's.Thank you very much!

I learned so much off of this one video I feel like I could open up The New Texas Workshop, thanks!

That's a great process...looks great... thanks...

This was such a good video and an excellent learning curve as I've just got a new router table especially for building a set of door for the kitchen I've hand made so excellent thank you. 👏👏👏👍

You are a Great instructor. ❤

XO, Macenna gave your channel a huge shout out! Love your content too! Subscribed!

Super detailed explanation... great video! thanks Wes.

VERY GOOD INFO. Thanks!

Making the parts double wide then cut them to width afterwards is ingenious. Thanks for the idea.

Your a fantastic teacher Wes , I’m looking to start my first diy kitchen and this was EXACTLY what I needed to know. Great resource youve put on KZfaq, thanks so much 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

Your are a perfectionist man! .

Great tutorial. XO, MaCenna mentioned you on her recent video. She did an amazing job using your techniques.

Great technique Wes and a great looking door!👌👌👌👌👌

Outstanding video Wes! Thanks for sharing,

Enjoyed this. Cheers mate.

Thank you

Veldig lærlingsrikt video, Alt er forklart på en ryddig måte .Takk for innsatsen.

Thanks again. Great video. 👍

I found your channel through MaCenna here in YT. This is so inspiring!