Learn To Fly the Douglas DC-3

No video

Learn To Fly the Douglas DC-3

Рет қаралды 18,544

Күн бұрын

This two hour session is a workshop on handling the Douglas DC-3, C-47 Classic airliner in Microsoft Flight Simulator. From every aspect of the POH, speeds, cockpit familiarization and demonstrations. Come join Howard on this learning journey to master the skill of handling this legendary airplane.
ForderLearnToFly website: ForderLearnToF...
Twitch Channel: / forderlearntofly
Experimental Aircraft Association: (EAA) www.eaa.org/eaa
Tobii Eye Tracker discount: tobii.gg/forder
Table of Contents:
00:00 - Introduction
01:04 - Let's Get Started
01:53 - DC-3 Background
04:12 - First Flight DST 1935
05:15 - Technical Specifications
06:05 - Home Cockpit Bindings
09:44 - The Engine
11:23 - Weight & Balance
11:56 - The Seven Steps
13:57 - Improvement Mod
17:26 - Step 1. Obtain the POH
18:17 - Home Cockpit Setup
18:54 - 2. Learn Vital V speeds
24:09 - 3. Handle Multiple Engines
29:38 - 4. Make a Checklist
30:25 - 5. Learn About the Blue Knob
32:09 - 6. Cockpit Orientation
45:38 - Demonstration Steps
47:38 - Startup Cold & Dark
1:04:12 - Runup & Taxi
1:15:58 - Takeoff & Cruise
1:26:36 - The A-3 GyroPilot
1:28:52 - Approach & Landing
1:40:06 - Shutdown Cold & Dark
1:42:10 - Now It's Your Turn
1:45:20 - How Did You Do?
1:46:30 - Questions & Wrap-up

Пікірлер: 50

@michelverheughe Жыл бұрын

Splendid ! My father flew the C-47 from Belgium to the Belgian Congo in the 1950s. I flew 750 hours in my Ultralight Kitfox III taildragger airplane in Norway. Now, at 75, I try to retrace the flights from my father, on the MSFS DC-3. Your video has learned me a lot of things, thank you so much. But I still have problems to keep this bird straight on take-off and landing ! My father must have been better than me ! ;-)

@michaelkaercher 2 ай бұрын

What a phantastic channel. Great work.

@billolgaau Жыл бұрын

I flew 1,600 hours in the DC-3 nearly all with Wright Cyclone R 1820 9 cylinder engines with 24 hours with the Pratts. R 1830 ( almost the same to operate). Taxing is an art form - to turn unlock the Tail Lock , add power to the out side engine & apply some brake to the inside of the turn - half way through the turn idle on the outside & stop the turn with some power on the inside - tail lock back in. You did a good job BTW

@ForderLearnToFly 2 ай бұрын

Thank you for your feedback and tips. I will practice that.

@Kyle-wf4id Жыл бұрын

great teaching! can't wait for more videos in order to learn how to fly!

@howardforder4481 Жыл бұрын

Thank you. Working on some more. Like the DHC-4 Caribou.

@SpaceJelly45 Жыл бұрын

Fuel selectors are in the Before Starting Checklist.

@rubensardon1504 10 ай бұрын

Thanks a lot, I learned how to deal and fly with a DC3

@lionheart8001 Жыл бұрын

Thanks for giving this excellent tutorial, exactly what I was looking for, concentrating firstly on the manual and then the demonstration is very nice approach.

@howardforder4481 Жыл бұрын

Just like in real life. Instructors will drill us on things in the POH just to see if we read it. I appreciate your feedback. Working on some more now.

@AB-kg6rk 10 ай бұрын

Rewatching this one. Im getting my computer and msfs very soon, thanks again for this tutorial, my favorite for this plane by far.

@willynicolasannicette2412 Жыл бұрын

I have been flying in real life and through flightsim for the last 25 years and I have just discovered your channel. I particularly appreciate your pedagogy and the detail level. Love it! Keep it up!!

@howardforder4481 Жыл бұрын

Thank you Willy. I got my teaching certificate through Harvard/Bok and my experience in my career as a Microsoft Certified Trainer. It helped that my wife was an elementary school teacher so good examples of teaching were all around me. Now I apply that to my love for all things aviation. Thanks for your feedback. Working my twitch stream and the next KZfaq lesson video.

@GeoTactics Жыл бұрын

AS a kid I actually flew many times as a passenger with my parents on a DC-3.

@thc4Fishu Жыл бұрын

i looking for soo long time something like that. You are my master now. Can't wait for more videos !!!!

@FoxtrotDelta11 Жыл бұрын

AWESOME VIDEO

@brianwillson9567 Жыл бұрын

To call the DC3 legendary is an understatement.

@AB-kg6rk 10 ай бұрын

Love this plane and your detailed instruction.

@Vonbeardingham Жыл бұрын

Chaps like you are a godsend to the rest of us! I would have watched this just for the quality of the content even if i didnt own msfs

@howardforder4481 Жыл бұрын

Thank you. It's a lot of work, but a joy to do. I appreciate your feedback.

@jameslanning8405 Жыл бұрын

Today, (Over the past 3 decades really), there's a turboprop version also. Doesn't the tailwheel lock, lock the tail wheel to the rudder? And by doing this, you can control the plane's direction by actually steering the aircraft with the rudder pedals. 'Unlocked,' allows the tailwheel to be turned with engine power, for those 180 degree turns, that the rudder just can't do.

@speedlime1515 Жыл бұрын

Great Job, i wish all Learn to fly tutorials where like this, and I had to learn the hard way to fly this amazing plane before I found this video. I had no idea the manual came with the plane and that it was hidden in the official package folder of the plane. Have you considered doing a DC-6 version next.

@howardforder4481 Жыл бұрын

Thanks for your feedback. We did do the DC-6 a year ago but not a KZfaq video. Only on twitch chat. I certainly could pull it together. It is such a dream to fly these engineering marvels in the sim. We couldn’t touch them otherwise. Working on a helicopter series for twitch right now which will become YT videos. I’ll start thinking about the DC6 next.

@Lince7722 Жыл бұрын

A nice video.

@aramos3639 7 ай бұрын

This is super useful good job man

@MegaPeedee Жыл бұрын

Very good. This was a cut above. I have subscribed (I just came across it by chance).

@ForderLearnToFly Жыл бұрын

Thank you. Let me know what other planes you wish me to dive into. I regularly give "Learn a New Airplane" lessons on Tuesdays on my twitch channel: twitch.tv/ForderLeanToFly

@drisscode Ай бұрын

Good video, can you please do the PMDG DC-6 ? Regards

@mizzyroro 10 ай бұрын

I can never get this aircraft to track down the runway after landing and nothing I do can stop the tail from swing wherever it wants to. Every landing ends up with the aircraft running off the runway whether the tailwheel is locked or not.

@harisguhdija9734 2 ай бұрын

Think you need speed and power over the tail. Jonathan Beckett has a video on it.

@mizzyroro 2 ай бұрын

@harisguhdija9734 Just this weekend, I did some practice and was finally able to get it to stay straight. Even in a crosswind. Yes, power and very little rudder movement. I was kicking the rudder too much.

@pontushaggstrom6261 7 ай бұрын

on my 4th attempt, i was able to take off

@GeorgeRon Жыл бұрын

Outstanding tutorial. I'll be following your steps from the same airport. This will be my next step up from the C172 in MSFS! Just had a question. Why are the fuel booster pumps ON on takeoff and touchdown but OFF during cruise? Did I get that right?

@howardforder4481 Жыл бұрын

You got it right. I could look deeper into the POH for the DC3 and look at the fuel diagrams, but generally, we turn on fuel pumps for takeoff and landing in many planes as a safety net, just in case there is a fuel issue during those two times of very low to the ground and very slow. An engine failure would be catastrophic. During flight the engines have fuel pumps, just like many cars and even if you have a fuel pump failure in flight, you can switch on the fuel pump to override it. In real planes it's a safety thing, redundant thing, like having two engines when you can safely operate on one.

@saren6538 Жыл бұрын

Are you using the improvement mod before I watch the full video ?

@howardforder4481 Жыл бұрын

No improvement mods. They weren't out yet. This product was included in the 40th anniversary update.

@saren6538 Жыл бұрын

@@howardforder4481 cool another video we can expect then :)) dc3 with improvement mod - can’t wait 😛

@osros Жыл бұрын

Still working on this video but great teaching so far. Problem with improvement mod, when installed I lose Condition levers on the Bravo, they work on mouse but not on Bravo. when uninstall all is fine any idea?

@izazroosal950 Жыл бұрын

WOW THAT'S GREAT COURAGEOUS STEP AND BEYOND THAT VERY LESSONS WOULD HUMBLY HELPFUL TO US ALL ! IZAZ RASOOL MOHAN FROM BARIDHARA GULSHAN DHAKA BANGLADESH AND BEYOND.

@makebelieveballroom Жыл бұрын

Did you disconnect ground power before starting the left engine?

@rogerminn Жыл бұрын

How may I obtain a copy of the DC3 manual you referenced? I am using an Xbox and not a PC.

@Adventure494 Жыл бұрын

I can email to you?

@ForderLearnToFly Жыл бұрын

@@Adventure494 I am not sure I can just disseminate the manual in case it goes to those who don't have this sim. To be cautious, just email me at hforder@gmail.com and I will send it to you as you own the plane on xbox. This goes for others too. Maybe email me a screenshot of your xbox home screen with your handle up top. I keep this confidential and only use it to send you the manual. I understand you can't get to the folder to retrieve it.

@Adventure494 Жыл бұрын

@@ForderLearnToFly Hi Howard, no worries. I already have it. I wanted to send Roger a copy as he already has an Xbox. But thanks for pointing out the legality aspects of it. Didn’t think about it. 😊 Love the channel! Happy Holidays!

@silwerston Жыл бұрын

Its not a mod...how about the mod? Im curious about radionavigation in this plane

@ForderLearnToFly Жыл бұрын

It's not a mod. This product comes with the 40th anniversary edition (free update) from Microsoft. There are two mods you can add if you wish. The GotFriends expansion pack (for the Beaver and DC3/C-47) and the Duckworths flight model mod. Both are recommended and work beautifully. flightsim.to/file/43893/duckworks-dc-3-improvement-mod www.got-friends.com/products/40th-anniversary-expansion

@petermillar9022 4 ай бұрын

Your start process is all wrong. You need 1.Fuel 2.Air 3. Spark 1. external battery on. position lights on 2. left and right tank set (fuel) and boost pumps on to start 3. Cowl flaps open (air) 4. Propeller condition levers fully forward, 5. Throttle open 1inch or 15% 6. Red Mixture Condition levers off or back 7. Master ignition switch on (pushed in) Energize switch ON to right engine FIRST as when started drives battery (down) count to 8-10 (props turn to make sure there is no hydraulic lock in the cylinder). 8. Mesh switch to right engine (down) 9.Right magneto switch fully turn on.(spark) 10. Right prime switch on (fuel). Note: When you hit the prime switch for either engine on startup the red mixture condition lever automatically moves to Auto rich. 11. Ground power Off, 12. Inverter switch On. 13. Battery switch On. Rinse and repeat for Left. NOTE: You dont have to keep repeat pushing the prime switch, that is incorrect, just do it once after magneto on step 10. If you havent got fuel, air, or spark set, it wont start. duckworks mod start is slightly different

@ForderLearnToFly 4 ай бұрын

Excellent. Thank you. I rely on the checklists provided by the developer or if absent, checklists from the internet supplied by pilots of the beast. I will review that and see how I can improve that. I appreciate your insight.

@makebelieveballroom Жыл бұрын

Now I see you do it. just a little late.