Learned a hard lesson with the Atomstack A12 Pro Laser Engraver
Рет қаралды 6,204
5 ай бұрынNever underestimate the amount of fumes laser cutting can produce!
Here's the machine: atomstack.com/products/atomst...
And here are some of the different materials I got to test with:
Basswood: amzn.to/3U5plvf
Calvana: amzn.to/3RZNgt6
Plexiglass: amzn.to/3vHAWGC
Leather: amzn.to/3U9VhyG
Vinyl: amzn.to/3Ud94nV
Be Safe!
🔥These links support my madness🔥
💲 NordVPN: www.bmbsucks.com
💲 Members-Only Punishment: bit.ly/bmbmembers
(As an Amazon Affiliate, I earn from qualifying purchases)
💯These are my other Socials💯
🔹Twitter: bit.ly/BMBTw
🔹Instagram: bit.ly/bmbinstagram
🔹Tik-Tok: bit.ly/bmbtock
🔹Discord: bit.ly/BMBDISCORD
✉️P.O. Box for Mail✉️
Byte My Bits
P.O. Box 77
Haysville, KS 67060
#Atomstack #laser #engraving
@MichaelP-ns 5 ай бұрын
You should really watch Maker's Muse's video on laser cutter safety before buying or using a laser cutter.
@XxTWMLxX 5 ай бұрын
Good ol' fake PVC leather! Awesome to breath in.
@Lyrkan_ 5 ай бұрын
Yeah, that's was really painful to watch... he pretty much speedrunned everything that you shouldn't do with a laser cutter/engraver. - Don't cut/engrave vinyl or anything PVC based (it CAN kill you) - Don't cut/engrave something if you don't know what it is (even if the leather was actually leather the way it is tanned can introduce really nasty things) - Don't move the machine while it's running - Don't run it in a closed room without any ventilation/filtering - Don't run it with an animal nearby - Don't leave it unattended - Don't use glasses provided with those cheap machines
@CGGC0202 5 ай бұрын
first rule with those laser engravers, NEVER trust the glasses they give you ...
@Pro4TLZZ 2 ай бұрын
Dont doubt the lase
@revtoyota 5 ай бұрын
Get Lightburn it is the best software for lasers out there. It's worth the few bucks it costs a year to use it. As for venting put the laser in an enclosure and vent it outside. Just about everything has a coating on it these days and ALL of them off gas nasty stuff. Ohh and always use the air, it keeps the lens on the laser clean and the edge (side) of the board you are cutting from charring. It also helps with engraving use a low setting.
@RavenRaven-se6lr 4 ай бұрын
Could you tweak the laser to a 30 w retro fit
@Cameronsutubes 5 ай бұрын
Would this be the first time reading instructions Jason 😮
@bojakcates2817 5 ай бұрын
try lightburn
@TimOsman 5 ай бұрын
Get lightburn its $60 i think. I don’t mnd the smell of burning wood so i put a fan behind it and turn it on, smell is light but no smoke. My cheap sculptfun can do 3m vinyl, wood, cement, etc etc.
@mitchellstl 5 ай бұрын
Fior ventilation, get a window fan. Have it blow the air out the window.
@hazy33 4 ай бұрын
And this folks is why USA'ers need their very own special safety instructions.
@connectdotstars 4 ай бұрын
Lasering vinyl creates hydrochloric acid gas
@joseph-montanez 5 ай бұрын
Hannibal Lecter will be reaching out in regards to your human skin collection.
@RavenRaven-se6lr 4 ай бұрын
Your a gadget man - me to
@luvnotvideos 5 ай бұрын
Yeah, I think that piece of leather you burned was chrome-tanned - meaning you were breathing chromium fumes. Not good.
@CantankerousDave 4 ай бұрын
Especially for his dog and cat.
@genevievehoulton5433 5 ай бұрын
Hello,Jason. May I get reply from email?
@SirHackaL0t. 5 ай бұрын
Shaky video like this gives me a headache.
@TechySpeaking 5 ай бұрын
First
@davidflorey 5 ай бұрын
First
AtomStack A24 Pro: High speed laser engraving @50,000 mm/min, the fastest laser engraver ever tested
Aurora Tech
Рет қаралды 10 М.
Joshua De Lisle
Рет қаралды 354 М.
GADGET CRUNCH
Рет қаралды 3,5 М.
JOON Italian
Рет қаралды 863 М.
LED Screen Factory-EagerLED
Рет қаралды 15 МЛН
notebook-31
Рет қаралды 126 М.