Learned Stained Glass Series: Grinding Stained Glass & Different Bits Used

Рет қаралды 5,578

Күн бұрын

Discuss the different bits used in grinding stained glass and continue grinding the heart pattern stained glass pieces.
***************
Like my content? You can buy me a coffee.
🌐 Buy me a coffee - www.buymeacoffee.com/scoartglass
👍📝▶🔔Subscribe to the channel and hit the notification bell so you will know when I post new content. Thank you for your continued support of this channel.
🌐 Website/Store - scoartglass.com/ - Discover, Learn, Create Stained Glass
************** Stained Glass Grinder Bits**************
This link shows Grinders & Grinder bits available on Amazon.
scoartglass.com/product-categ...
************** Stained Glass Tools Starter Kit **************
Glass Cutting Square - amzn.to/39Mx3Sh
Safety Glasses - amzn.to/2LHA12h
Starter Pistol Grip Glass Cutter - amzn.to/3io11jf
Running Breaking Pliers & Grozer Pliers - amzn.to/3sApQNB
Glass Grinding Stone - amzn.to/3j3Rcay
Fid Pack (Burnishing foil to glass) - amzn.to/3qCyMjT
Starter Soldering Iron - amzn.to/38URlK1
*****
Stained Glass Consumable Material Starter Kit
Cutting Oil - amzn.to/39H8Hcp
7/32 Copper Foil (Silver Backed) - amzn.to/2M2TKJq
Flux (Liquid) 8 oz. - amzn.to/2M2tzmp
Flux Brush (Acid Brushes) - amzn.to/38V1VRf
Solder 60/40 - amzn.to/38Zx06t
****Able to spend a little more? Stained Glass Tools Upgrade Options ****
Tools:
Toyo Hand Grip Glass Cutter (Thick Glass) - amzn.to/3ioHBdU
Toyo Pencil Grip Glass Cutter - amzn.to/3nXwaLz
Toyo Custom Grip (Saddle Grip) Glass Cutter - amzn.to/2NjG9yl
Weller Soldering Iron w/Temp Control Stand - amzn.to/2XPqQiy
Hakko 601 Soldering Iron w/TempControl - amzn.to/3p2bHGY
Foil Pattern Shears - amzn.to/39OACYa
Stained Glass Grinder (Inland Wiz CG) - amzn.to/3iqaZAG
Light table (Various sizes available) - amzn.to/2Nit1JF
Respirator Mask - amzn.to/3j2sSG5
Hakko Smoke Absorber - amzn.to/3ctDexd
Foil Caddy (Dispenser) - amzn.to/3r0EVXc
*****
Consumable Materials Upgrade:
Gel Flux (No Odor/No Smoke) 4oz. - amzn.to/38VmSvu
Paste Flux - 4oz. - amzn.to/3nPLeLa
7/32-3M Venture Tape (Silver Backed 1.5Mil) - amzn.to/3sAtqay
7/32-3M Venture Tape (Black-Backed 1.0Mil) - amzn.to/3oRz7hY
7/32 Edco Copper Foil (Black-Backed) - amzn.to/2XRTT5q
Amerway 60/40 Solder - amzn.to/3p8kua0
Canfield 60/40 Solder - amzn.to/2LCcm3o
Variety Glass Pack (8"x4" - 8 Sheets) - amzn.to/3oZSzJt
***************
Checkout Tubebuddy! It has innovative tools to help you grow your channel with confidence. It provides time-saving tools to help creators optimize their channels with ease. Click the link below (affiliate link) and check out the plan that works for you.
🌐 www.tubebuddy.com/TBSCOARTGLASS
FTC Legal Disclaimer - Some of the links found in the description box may be affiliate links, meaning I will make a small commission from purchases you make through my link. There is no extra cost added to you for using these links/codes, it's just one more way to support me and the channel! I sincerely appreciate your support by using these links.
🌐 Show your support for SCOARTGLASS as a "Patron" on Patreon: / scoartglass
🌐 Like SCOARTGLASS on Facebook - / scoartglass
🌐 Follow SCOARTGLASS on Instagram - / scoartglass
🎶 Music provided by MixKits.com
🎛🔉SFX sounds from Zapsplat.com
Obento by KODOMOi / kodomoimusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/obento-kodomoi
Music promoted by Audio Library • Obento - KODOMOi (No C...
#SCOARTGLASS #learnstainedglass #stainedglassgrinder

Пікірлер: 26

@SCOARTGLASS 3 жыл бұрын

My grinder doesn't have a tall enough shaft for stacking the 3/4" standard bit and the 1/4" bit together as you might see in some studios. There is an even smaller 1/8" bit for even tighter spots. Leave a comment if you got topic ideas or come across any other grinder bits.

@littleliftera8244 9 ай бұрын

Awesome info thank you

@SCOARTGLASS 9 ай бұрын

Glad it was helpful!

@peterroberts1658 Ай бұрын

Would be keen to know where to buy the blue tool that you use to help hold the glass while grinding . Love the vid, thank you.

@SCOARTGLASS Ай бұрын

It is a glass grinder cookie. You can buy through my website store. scoartglass.com/product/grinder-cookie/. Thanks for watching!

@doracarrington9219 9 ай бұрын

I have 'inherited' one of your grinders - Is your Kirstall 1 suitable for grinding broken pieces of chinaware? Is there an instruction sheet? I am not sure how much this machine has been used for glass grinding, but when will I know it is time to replace the existing one? Thanks in advance.

@SCOARTGLASS 9 ай бұрын

Thanks for watching and the question. I am not to familiar with Kristall grinders. I believe these are more available in Europe. Mine is a Diamond Tech Max 2 grinder and it has been a champ based on all the grinding I have done. It should be suitable for chinaware but I would use a a fine grit bit so not to cause too much dust and to test since chinaware (porcelain) is more dense than glass and then go from there. As far as when to replace, stops working or the motor seems to drag or has slowed down after you turn it on. Hope this helps.

@vickikgibson9470 5 ай бұрын

I know you may not see this, but where can I get that glass hold tool? That's a great idea for the small pieces! And do you have a pump on the grinder? I don't have that but the water tank under the top of the grinder...? Thank you! nice informative video!

@SCOARTGLASS 5 ай бұрын

I usually carry them on my website, an affiliate of amazon, but here is the link on amazon for the "Grinder Cookie". It saves your thumbs from little glass scratches! amzn.to/3OP4w3D. I had a pump in the bucket that pumps the water up to the grinder (amzn.to/3UIuF7U). I will be making a new video on a new pump system for the grinder later this spring. Setting up new studio now.

@glasslight7960 9 ай бұрын

What grit do you generaly use? I've been purchasing the 100 standard, but wondering when the coarse or fine would be beneficial.

@SCOARTGLASS 9 ай бұрын

I mainly use the standard/regular grit (100 - 120). I find the course bit useful if you are working with heavily textured glass. Scores aren’t always consistent and glass sometimes has a mind of its own and doesn’t break where you want. This bit lets you quickly grind the excess off and doesn’t ruin you regular bit. Fine I don’t use but recon it might be good for glass beads or mosaic work? Thanks for the question and watching.

@stevieg3078 2 жыл бұрын

Thank you for your video. I'm going to attempt to use my grinder to sand & polish a rough opal stone. What are the finest grit bits available?

@SCOARTGLASS 2 жыл бұрын

For a stained glass grinder, I believe the finest grit bit is 600 (Ultra Fine Grit). You can buy from where you buy your materials. I use the Anaraku Twofers bits on my machine. I buy them from Amazon. Here are some links. Since your grinding from rough state you might get the fine 220 (Fine Grit) amzn.to/33Y7uyL and then to the Ultra Fine 600 Grit amzn.to/34nFpQU. Thanks for watching.

@stevieg3078 2 жыл бұрын

@@SCOARTGLASS Thank you for taking the time to respond.

@oneofthesixbillion Жыл бұрын

Given the same coarseness, does a 1" and a 3/4" bit have different qualities? When would you use one over the other?

@SCOARTGLASS Жыл бұрын

If your not changing coarse grit, in my opinion, no difference. I primarily keep the 3/4” on my grinder all the time as it is more versatile for smaller inner curves and shaping. To me, the only advantage for the 1” would be larger pieces of glass with minimal curves to get around the glass a little quicker or using it as a base to stack bits to reduce change outs. I hope that helps. Thanks for watching.

@gagunshooting803 17 күн бұрын

What brand of bits do you recommend? Also which size do you recommend 1” or 3/4”?

@SCOARTGLASS 15 күн бұрын

If you don’t have a specific branded grinder that only takes that brand bits then I recommend the Aanraku Glass Grinder Bits - 3/4 inch “Twofers” : scoartglass.com/product/aanraku-glass-grinding-bit-3-4-inch-twofers-stained-glass-mosaic-supplies/. I have these and other sizes on my affiliate website. Thanks for watching and the question.

@gagunshooting803 15 күн бұрын

@@SCOARTGLASS Thanks I have been looking at those.

@gagunshooting803 15 күн бұрын

@@SCOARTGLASS I will definitely check out your link…thanks

@CharmaineSmyth Жыл бұрын

I recently purchased a ripple bit as I understood it would facilitate applying the copper foil on thick/extremely textured glass. However I am baffled as to how to set up the ripple bit on my grinder (it doesn’t sink into the hole surrounding the grinder motor shaft) and I am not sure how to use the bit correctly. Wondering if you have any videos with demonstrations.

@SCOARTGLASS Жыл бұрын

Charmaine thanks for your comment. I struggled at first too. Check to make sure the ripple bit you have matches the contour of the shaft. Theses bits do come in handy with thick textured glass. I will see if I can get a video posted here soon on this topic per your request.

@pollitobebe 2 жыл бұрын

What kind of glue do you use?

@SCOARTGLASS 2 жыл бұрын

I use Elmer’s stick glue. The kind you use in school. It dissolves in warm water very easily.

@jaikumar3409 2 жыл бұрын

Priece Kitna grinder ka

@SCOARTGLASS 2 жыл бұрын

यह पुराना मॉडल ग्राइंडर है। इसी तरह का मॉडल $ 189 यूएस डॉलर है। मेरी वेबसाइट पर लिंक. scoartglass.com/product/gryphon-studio-stained-glass-grinder/. देखने के लिए धन्यवाद!