Leather Seat Repair with using Vinyl and leather repair kit | RESTORE

Leather Seat Repair with using Vinyl and leather repair kit | RESTORE | ALIMECH

Рет қаралды 468,971

Күн бұрын

In this video i will use Vinyl and leather repair kit, ((( video is not sponsored )))
Restoring leather sit with Vinyl and leather repair kit
kit i used: amzn.to/2tzUxcb
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/3beZ4BN
Dji Ronin sc Staiblizer: amzn.to/39bvyed
gopro hero 5: amzn.to/2H2ZbSQ
samsong gear 360: amzn.to/37YDj7b
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

Пікірлер: 208

@abdullahKSA799 4 жыл бұрын

Followed your tutorial and now my seat looks perfect. Thank you!

@AliMECH 4 жыл бұрын

Thanks for watching, glad my video helped you 🙏

@richeyrich2203 3 жыл бұрын

How do they look a year later?

@abdullahKSA799 3 жыл бұрын

There was a big cut on my seat, and restoration fixed it. So far, I don’t have any issues and my seat still looks perfect except some small stretches.

@AliMECH 3 жыл бұрын

Richey, the repair area still same but I have some more damaged on other sits,

@Anonymous-it5jw 2 жыл бұрын

Well planned and produced video on a topic of interest to anyone who drives the same car for more than 4 or 5 years, or who buys used, older vehicles, many of which have rips and tears in the driver's seat. Thanks for making this. The detailed instructions are great!. P.S. I'd recommend cleaning the entire seat bottom with the detailing brush & cleaning solution, so that the repaired area would not stand out because it was cleaner than the surrounding area. Takes only minutes more, and you have to wait 4 hours for the seat to dry anyway. Particularly liked your technique for putting the ventilation holes in the patch to match the surrounding area.

@petergriffin3549 3 жыл бұрын

It would have came out a lot better if you would not have cut the material but just loose strings, put that backing under trim and super glued the tear back together, put the resin over the cut with would be very small if done this way. Painted over the damaged area and then used some very fine sand paper to smooth it out. That is the way repairs are done by the manufacture.

@novabluerocks 4 жыл бұрын

Thank you for posting this video. Your seat leather looks exactly like mine. It gives me hope!

@AliMECH 4 жыл бұрын

You welcome, thanks for watching

@ThomasLeonard454 4 жыл бұрын

Not bad, a lot better than I thought it would be. Kudos.

@AliMECH 4 жыл бұрын

Thanks

@neilsmith4836 4 жыл бұрын

That's awesome thank you

@tonyg-2jz82 2 жыл бұрын

Dude just in the last few days alone I've watched like 5 of your videos. I had to replace a fuel filter and clean my fuel injectors and you had awesome straight to the point without leaving anything out on those. I can see you stick to the same formula for other videos including this one. Much appreciated. Where you from brotha? Eastern Europe, Middle East?

@JuanKis 3 жыл бұрын

Wooooow!!!! That is really cool Man! I didn't know that was possible! Thank you for sharing!

@AliMECH 3 жыл бұрын

Thanks, if you take ur time with mixing colors, u will get better results than mine

@calmstormambience1875 2 жыл бұрын

Cool. I have a hole the size of a small felt pen and it's a leather seat cushion it's not that big though. but wondering when you put the resin on top of it will it reinforce the hole from tearing overtime?

@destruxandexploze2552 3 жыл бұрын

“Only when you get close you can see the repair” Me from 10 feet away: Boi how much Taco Bell did you eat to tear through the seat like that?

@AliMECH 3 жыл бұрын

Lol, it happens everywhere on that seat, even on the back

@markwillis5472 3 жыл бұрын

😂😂😂

@zzzzoot Жыл бұрын

This is the most helpful tutorial for this kit, thank you.

@AliMECH Жыл бұрын

Glad it was helpful!

@brandonbattle9359 Жыл бұрын

It’s def way better than before!!

@6hundred6ixty6ix 2 жыл бұрын

You’re a Genious!!!!

@lethecm8385 3 жыл бұрын

Superb!!!!!

@jayyin88 2 жыл бұрын

Very well done!

@seashorelineone 4 жыл бұрын

Nice job! Looks like I can do it Thanks

@AliMECH 4 жыл бұрын

Yes, its easy,

@captainnutty4168 2 жыл бұрын

What did you use for the holes?

@MrLospect 5 жыл бұрын

Looks good, well done!

@ElkhornRich 3 жыл бұрын

Know this is an older vid but, great job! Thanks.

@AliMECH 3 жыл бұрын

Thanks 🙏🏻🙏🏻

@faris9327 Жыл бұрын

Would it reopen after a while from sitting on it it seems to be labor intensive and in the end if it opens again its a loss with the kit as well

@saradiaz6179 3 жыл бұрын

prefect job!

@AliMECH 3 жыл бұрын

Really not perfect, but better than before, I will do another video soon

@Phantoma3 Жыл бұрын

5:56 I would have used a Dremel tool with a very small drill bit

@tomvosejpka7854 2 жыл бұрын

This was the best instructional for this application that I have seen! Thanks!

@AliMECH 2 жыл бұрын

Thanks for watching

@melissacarr3257 Жыл бұрын

Looks great thank u for sharing

@AliMECH Жыл бұрын

Thanks for watching

@carlosoliva7350 3 жыл бұрын

Came out great

@AliMECH 3 жыл бұрын

Thanks Carlos

@matthewvasquez9278 2 жыл бұрын

I have the same tear on my 04 Highlander, see if I can make it look better before I sell it

@SportiesNJ Жыл бұрын

appreciate you Video, much needed

@docmiaz 2 жыл бұрын

This is a great video bro. I have a question. Can you put a link to the cleaning kit you used? It looked like it worked very well.

@israelsantos7896 Жыл бұрын

I would've cleaned the whole seat! That stuff works ... whatever it is!

@LifeAmongTheWildflowers 10 ай бұрын

Thank you!

@AliMECH 10 ай бұрын

You're welcome!

@MS-ic8lj 2 ай бұрын

Thank you 👍👍

@AliMECH 2 ай бұрын

No problem 👍

@naveencarworld.2782 3 жыл бұрын

Excellent sir

@AliMECH 3 жыл бұрын

Thanks 🙏🏻

@ianblanchet5500 3 жыл бұрын

What is the name of the song that you used throughout the video ?

@TK-lc7be 3 жыл бұрын

Great job

@AliMECH 3 жыл бұрын

Thanks,

@javiergomez9099 3 жыл бұрын

Dang this is a really good tutorial

@AliMECH 3 жыл бұрын

Thanks

@chatlelolcosanbonbazo559 10 ай бұрын

Very well explained exelente

@AliMECH 9 ай бұрын

Glad it was helpful!

@debbiejohnson1325 5 ай бұрын

What tool did you use to make the holes?

@WillChil466 3 жыл бұрын

Clean the rest so it matchs. What did u make the pattern with? The plug in wand?

@AliMECH 3 жыл бұрын

It comes with the repair kit

@hmdixon91 3 жыл бұрын

@@AliMECH what iron tool did you use? I think that is wat they are asking.

@jedibreezy7212 2 жыл бұрын

So now i have to go buy that tiny iron. Great. Anyway thanks for the video, appreciate!

@BuddysDIY 4 жыл бұрын

Great job brother!

@AliMECH 4 жыл бұрын

Thanks 🙏🏻

@GraceGuitar 5 жыл бұрын

I like your editing style 👍 great video

@AliMECH 5 жыл бұрын

Thanks Grace for turning in

@syedyounus5464 2 жыл бұрын

Keep it up bro I'm from karnataka

@AliMECH 2 жыл бұрын

Thanks bro

@BPoweredLove 4 жыл бұрын

I farted while driving and blew a hole right under my brown eye. I will use this video to fix my shart damage. Great video! Thank you!😘

@nodnarB14 4 жыл бұрын

Even this expert level tutorial cannot conceal shart rips on a leather interior. Please consult the owners manual.

@zixoon 4 жыл бұрын

Can confirm.

@strawbricketteshortcake5460 3 жыл бұрын

What am I a 12yr old boy? This thread is too funny😂😂😂

@mkfourgli1 2 жыл бұрын

Cleanest part of the seat

@sahanaash4653 2 жыл бұрын

For india you need HBC kit tell me

@I41535D 3 жыл бұрын

Good Video Tutorial

@AliMECH 3 жыл бұрын

Thanks

@etilhcir4645 3 жыл бұрын

You make me laugh cos you speak like you dont give a fuck but you do great work . LOL Thanks for the video

@AliMECH 3 жыл бұрын

lol thanks

@azamauto2936 5 жыл бұрын

Azam Ali says >>>>so brilliance

@AliMECH 5 жыл бұрын

thanks for watching

@jamesberonja1539 8 ай бұрын

Nice job!

@AliMECH 8 ай бұрын

Thanks!

@jubaxhunter6580 2 жыл бұрын

Good work man

@AliMECH 2 жыл бұрын

Appreciate it

@CARNIVOREat60 2 жыл бұрын

Nice video.. thanks

@AliMECH 2 жыл бұрын

Thansk for watching

@peachykeen96 4 жыл бұрын

I am purchasing a used car where someone tried to patch the leather and did a poor job so that it's basically just a blob of filler with no perforations. Is it possible to remove the filler they used and then re-patch it by myself?

@AliMECH 4 жыл бұрын

Yes, it would be much better, and take your time to match the color and it will be much better than before

@peachykeen96 4 жыл бұрын

AliMECH how do you recommend getting the old filler off?

@wellnesspathforme6236 4 жыл бұрын

@@peachykeen96 Cutting it out makes the most sense, no?

@mannyuribe8780 2 жыл бұрын

Since the holes do have a pattern. What could be done is to make it unnoticeable would be to make lines wit thin tape peices like a grid of a sort to match the pattern then start making it holey lol very good still THANK YOU!

@bamwa Жыл бұрын

yeah he slacked on that part. half the holes look like pen marks

@newvendetta9638 7 ай бұрын

color can be selected using ncs.?))

@annabarth7264 Жыл бұрын

The spatula they sent was insufficient for a truly smooth application.. IMO, a small offset spatula (typically used for frosting cakes) would have given MUCH better results..

@Ghoppa32 Жыл бұрын

Cut duck tape, apply, done lol

@rodbratcher8254 Жыл бұрын

What tool did you use to poke holes back in the seat?Does it come with the kit?

@lindamcd1217 Жыл бұрын

I used a craft bead reamer. Time consuming. But very relaxing! 😂

@houseofblouseampang2936 3 жыл бұрын

Howblong can last

@noname9585 5 жыл бұрын

great idea

@AliMECH 5 жыл бұрын

Thanks

@mercury0214 3 жыл бұрын

Looked great till you butchered those holes😂😂😂😂

@AliMECH 3 жыл бұрын

Oh yeah! lol

@bosslifethebusiness 3 жыл бұрын

Nice

@AliMECH 3 жыл бұрын

Thanks

@spaghetti_man3807 Жыл бұрын

I have a huge tear on the corner of my seat, how am I supposed to fix that? it goes halfway down the height of it...

@zerozero8643 7 ай бұрын

How much the price

@timothystallworth4295 Жыл бұрын

Where you get the iron from?

@AliMECH Жыл бұрын

It came with the kit

@temirtaragay8932 Жыл бұрын

Not bad

@yogensharma5721 2 жыл бұрын

Nice bro 👍

@AliMECH 2 жыл бұрын

Thanks ✌

@yogensharma5721 2 жыл бұрын

@@AliMECH do upload more ✌

@shalps9681 Жыл бұрын

Sick music

@misgual 2 жыл бұрын

Should I try mine or get a seat from junk yard ??🤔🤔🤷🏾‍♂️ the tutorial was great.✔

@ONC_Diggin 3 жыл бұрын

We just gonna pretend it looks good?? 🤦🏻‍♂️

@tbev3363 3 жыл бұрын

lol......it looks better than a hole for sure....but saying you can't even notice is a stretch.

@AliMECH 3 жыл бұрын

Lol, yes, I even said that it's not good, but it will hold it from getting bigger

@hansomesolo1136 2 жыл бұрын

@@AliMECH this guys trippin man for a repair it looks great 👍🏻

@jamesb9303 2 жыл бұрын

If you want it to look good, spend that dough. If you're looking for a repair, this is great.

@georgesmith113 Жыл бұрын

Well it looks better than it did Mr. Perfect

@nikolaikornienko8862 Жыл бұрын

That’s not bad man

@AliMECH Жыл бұрын

Thanks

@itsintheword230 Жыл бұрын

I would have took a sewing needle and poke little holes to match the pattern of the seat.

@KRYSISJAG Жыл бұрын

At first I thought what a sh!t repair..then I realised this is just a repair tutorial not a restoration to full glory...👏👍 Well done from New Zealand.

@AliMECH Жыл бұрын

Thanks, appreciate that

@Luna-sp7be 4 жыл бұрын

Does it matter which leather cleaner you use?

@AliMECH 4 жыл бұрын

No, just to clean the repairing area for better bonding

@Luna-sp7be 4 жыл бұрын

Thanks! I finally got around to purchasing my repair kit, but reading the instructions I already appear to have a problem. There's only one backing cloth provided, and it's much smaller than my tear. What should I do?

@AliMECH 4 жыл бұрын

You can put few layers of fabric too, it doesn't have to be that exact backing cloth

@lindamcd1217 Жыл бұрын

Triclean

@marshallsilva9389 2 жыл бұрын

That's really going to last?)

@devingorge1022 3 жыл бұрын

That seams like a lot of work

@AliMECH 3 жыл бұрын

The color mixing process is the hard one to me, but other steps are easy

@devingorge1022 3 жыл бұрын

Thanks for getting back to me, I'm going to try it in two weeks. Wish I could show you a picture of it, they way it is now

@AliMECH 3 жыл бұрын

No problem, my personal Facebook in the up right side of my KZfaq channel

@mjk9674 4 жыл бұрын

Good video, but the instructions clearly say: "do not use the included hardener" on a "soft area such as a seat"

@AliMECH 4 жыл бұрын

That's what they use in there official video, I tried it, it wont cure, it will stay sticky, and dont worry it will not be hard as u expect, even with the hardener, still like a rubber

@nelsonrivas7573 3 жыл бұрын

And that makina that you use to make the holes, what's its name?

@rlg42 3 жыл бұрын

Looks like it’s just a soldering iron with a fine tip

@sandakramo3ash 4 жыл бұрын

Honestly it's very obvious the inperfection even from far distance but thanks for the video

@AliMECH 4 жыл бұрын

Yes, agree with you, but much better than before

@mikebarker5783 3 жыл бұрын

It will stop from the hole getting bigger at least. or you could go on Ebay and spend 500$ on a seat.

@bunster4322 2 жыл бұрын

it's not the best but if you think about it it's cheaper than replacing the whole seat !

@AliMECH 2 жыл бұрын

Thanks, yes exactly

@alpo44 4 жыл бұрын

Horrible

@michaelpast19 4 жыл бұрын

My dog made a hole with his nails on my camaro leather seats 😢

@AliMECH 4 жыл бұрын

Oh that's not good lol, fix it like this 🙏

@johnyramos1954 4 жыл бұрын

Same thing happened to my Escalade

@hexZ06 3 жыл бұрын

johny ramos why do people put their dogs in their cars with leather interior 🤦🏻‍♂️

@DallasStorm43 3 жыл бұрын

@@hexZ06 Exactly!

@gusto8585 Жыл бұрын

ALLAH IS good!!!

@jaywheaton6755 4 жыл бұрын

If those seats were just maintained and cleaned and polished on a regular basis they wouldn’t tear like that. I’m sure those surfaces fissures are just due to drying of the leather, making it weak. A leather conditioner would do wonders on those seats. Sources: Owned two cars with leather seats, both in immaculate condition

@AliMECH 4 жыл бұрын

It's been maintained good but keys and jeans which has smale metal ripped it like this

@yamahayz9227 4 жыл бұрын

People also may do this on purpose, ask me how i know.....

@makeamoment2428 4 жыл бұрын

@@yamahayz9227 How do you know?!...

@katiehunt3083 4 жыл бұрын

Well, actual leather makes it last longer. This one is not leather...so it tears easier with age, regardless of condition.

@cedricadaniels7983 3 жыл бұрын

Thank you so much for this information! My mom has a Benz and the seats are like this. My brother was driving it for a while and the driver seat and arm rests are ruined! We had been thinking that it was because of how he always leaned back in the seat, but it could very well be that he didn't get the car detailed and the seats conditioned. I took it for an estimate and was quoted over 1k to have it fixed. Maybe I can find someone to do this instead.... just hope the outcome is as good.

@natrix0 Жыл бұрын

Yeah I have a tear just like that one and a repair place wants to charge like 900 for it so no thanks this’ll be just fine

@ApexRoyals 3 жыл бұрын

I think you need to find a better kit but not super bad. If it weren't for the holes it would have turned out ok.

@AliMECH 3 жыл бұрын

Totally agree man, the holes and mixing colors need experiance, I did that on camera without practicing, so ppl know what the result will be

@MrGeeza 2 жыл бұрын

Alright if it's Stevie Wounder's car..

@goodnightvids Жыл бұрын

I mean it looks better I guess lol

@XroorX 11 ай бұрын

Permatex kits is great FOR NON perforated leather seats. Feel this guy rushed the color matching. Also the backing patch he inserted was WAY TOO big for the tear and was visible from the perforations. A pro would’ve colored that backing cloth he inserted

@hellsgunz1006 2 жыл бұрын

Instructions unclear; hardener stuck in my urethra!

@diegogxn10 Жыл бұрын

Hasta la weba

@Golyamkur 3 жыл бұрын

Horrible how this repair is done! So obvious! Can't anyone do a good job so its NOT visible so badly?

@shereeward6905 11 ай бұрын

Well you no longer had a rip but it looked like???? when you finished. I wouldn’t want my nice sports car having a nasty repair such as that on my seat!

@mircea5013 3 жыл бұрын

Mate, seriously, you didn't even take the time to draw some lines so that you know where to put the holes, you just went to town with it..

@AliMECH 3 жыл бұрын

Yes, you are right

@andrewdytyniak1529 2 жыл бұрын

See A.R.T.s Real Repairs if you want to see how to repair perforated leather seat where it looks like new. This repair what we use to call "butcher job" Sorry, I know you did your best but A.R.T.s will show you a professional repair. (PS...I'm not associated in any way with A.R.T.s, just try to help with another option). Oh, and 'seat' is not spelled 'sit' : )

@GrabinGears 3 жыл бұрын

Wow that leather is filthy

@alexthai2456 Жыл бұрын

wasting my time of doing this.............why not buy new chair...........and I have to cost money to buy all the tools, gel, and instrument for it in order to fix it.....lot of works