This is a package opener feature on the large flat screwdriver tool. One important thing to note: this is truly a ONE HAND multi-tool (Px, Tx, Kx) for all tools. Leatherman has shown its great capacity for innovation and engineering with its FREE models.

I have both the surge and the wave and the p4 is my favorite as a practical edc multitool. One hand operation and easy deployment are advantages that I will never go back from again. Had huge anxiety that I was going to miss the bit holder but haven’t even once actually needed it. Free is by far my favorite multitool and I bet if you use it for over a couple weeks you will agree. Side note: fidget factor is 100/10

The Leatherman free p4 is a pretty good multi tool. It will do the job. 👍

I honestly don't see a reason why people heavily criticize this model. I think it is great tool, and the one hand functions are amazing for those who need it.

This has been my every day carry at work and away from work for about 8 months now and I love it. I mostly use it over the surge for the one handed operation. I work in residential construction and I mostly use the serrated knife for package opening, the large flat and phillips drivers and the scissors. But its been great for me so far

I like my P2 its perfectly fine and the implements work well, the problem is a lot of people are to fussy, haha!

I just picked up a Free P4 last week. I’m loving it so far. The pocket clip and one hand blade are important for my EDC.

This is a great tool for older folks like my Dad and his best bud who are now in their early 80's.They still have their 1st gen Leatherman tools and wear them every day. Now that they are having tactile issues, I am building them both a tricked out P4 with the bit holder from zapwizard. Doing offset colored cutter blades, and cool pocket clips from Donk. I am also getting them each bit kits and ratchet drivers (when they are back in stock at a reasonable price) Lol Amazon is gauging them for $68 at the moment so $74 with tax or so. Meanwhile I will keep fiddling with their P4's so they are butter smooth when I gift them.

One hand operation including deploying all tools is a must if you are holding whatever you are working on. The flat Phillips is sturdy and works great on small and medium screw heads.

I love the free series. The P4 is my most carried multi-tool. Appreciate your videos.

Been carrying mine for 2 months or so, whenever i got pants on, with shorts i dont carry it. But ive gotten made a custom made Horizontal leather sheath for it, and removed the pocket clip. I freaking love it. Ive taken a dremel to most sharp edges, i found it to have WAY too many hotspots out of the box, but ive fixed it now. I just love that P4 :)

Comments to drive engagement, you’re really helping me put together the proper multi tool for my front desk job at a hotel right now I’m looking at a Gerber mp600 blameless! But really excited to mod a wave to have no blade other than scalpel for a removable blade, definitely grabbing that wave t shank adapter

People either love ‘em or hate ‘em, and the ones that hate ‘em, don’t like the magnetic architecture because they work around metal shavings, etc., and I get it. Then there’s the wobble, and I get that, too… but I find them very unique. 👍🏻

If they switch out the serrated blade for a file and then replace the file with a small serrated blade like on the sidekick which is perfectly capable of cutting rope then this tool would be great. Also add the ruler to the large flat head and make the ruler something else like a chisel or something. Oh! and also make a proper awl! I dont need 5 flat heads! I barely need one... then the tool would be great

Another great review. I have the P4 - it's brilliant. Very smooth opening, a good tool selection, pocket clip, all locking tools, relatively compact (although still weighty), nice scales & looks pretty sleek too. What's not to like...?

Good review. I will be looking forward to some of your comparison videos. This is on my shortlist for a possible multitool Christmas gift.

So you want us to pay you to buy multi tools? Lmao 😂 🤣 😂 🤣 😂

Yah iv chipped those Phillips heads on a door jam before. After that I'm weary of those particular Phillips

Carried mine for over a year, and haven't seen one that could replace it. The magnets pick up grinding dust and metal shavings is my only gripe

Great presentation mate. Merry Christmas & safe New Year.

Free p4 Is the Better leatherman multitool and the more practical. Despite woht evryone say in America. The tools are very practical and design Is a real revolución in multitool world. Is the only leatherman Almost comparable with Victorinox swisstool quality. If It wosnt for the usual leatherman poor and soft pliers steel. Specially in the pivot. After few hard wire cutting muy free p4 be came with a horrendous play in the pliers. Worst than MY others leatherman. With a Little mod in the Phillips screwdriver i can use the leatherman bit adapter. Leatherman must absolutley improve steel quality or Heat treatment. Pliers are ti soft and rapidly take a indecent Play. And the theets Always bend. If leatherman put on pliers the same steel of Victorinox pliers maybe can be comparable. And only in free series.

prefer the p4 than the other leatherman that i have. If i edc leatherman, will always be the p4. Price is getting more expensive now.

😀😀😀cool

Looking at the Wave+, Surge, Charge, or P4 after getting the T2.

I dont like the wiggling handles. Also weight can be a sign of strength too. This is not something you gonna use while building your house or garage and they never advertised it as such a tool. It is a hobby tool for people who occasionally do something other than watching tv. Nice review though.

Great review and comparison

love my p4 :)

I had a P4 since they first came out. It was a birthday gift so I will keep it but I really don’t like it in its current form. The scissors aren’t very good compared to a Victorinox, the lack of a bit driver is a deal breaker and the file is not really very useful. Also, I tried to use this tool but I’m around a lot of metal and metal filings and it gunks up pretty easily. That in and of itself isn’t a dealbreaker but it’s just one more problematic thing. If they added a bit driver and replaced the saw with a blade exchanger ala the Surge, I’d definitely be interested. Otherwise it’s a mediocre tool at a premium price.

Do these models have locking blades?

It would have been better if it had a bit exchanger instead.

Sheath went immediately into the trash. Why tf can’t it ship with a Portland-made sheath? I will pay extra, guys, jc I just paid $150 for a Portland-made multitool 🙄

I haven't read, heard, or seen anything that convinces me that the Free series is anything more than a collection of toys. The serrated blade is actually pretty good, but the rest of the tools are jokes in search of a punchline. They have the balls to charge $150 for this POS? Shame on you, Leatherman.

I don't like that they are a filling 🧲. They have too many 🧲 to collect every metal shavings in the immediate area.