LED Headlight bulb replacement

LED Headlight bulb replacement - 2017 RAM Sport -

Рет қаралды 1,525

8 ай бұрын

After completing the LED fog-light upgrade (link below), I knew I needed to upgrade the stock headlight bulbs to make it all match. I was happy with the stock projector style housing that came on the Sport model RAMs, so I only wanted to do the bulb replacement. I decided to go with ‪@sealight_official‬ and their 9005 bulb LED Headlight kit. Everything went very smooth with the install and extremely happy with the results. It really lights up the night. No check engine lights or bulb out lights with this setup so far either. Consider subscribing if you'd like, or leave a comment if you have questions. Thanks for watching!
#ram #ram1500 #ledlights
Link to LED bulbs purchased:
www.amazon.com/SEALIGHT-28000...
Additional link for just the 9005 bulbs if you have factory projectors like I do:
www.amazon.com/SEALIGHT-9005-...
LED Fog-Light install video:
• LED Fog lights with DR...
Link to 2017 RAM Playlist:
• 2017 RAM Hemi

Пікірлер: 9

@RaymondLamb 8 ай бұрын

Watch LED Fog light upgrade video here -> kzfaq.info/get/bejne/gpebnLNp07nGhas.html

@victorortega2718 Ай бұрын

Your amazon link says they do not fit the 2017 ram 1500 ?

@RaymondLamb Ай бұрын

Thanks for letting me know. I wonder if they changed something. On mine, with the factory style projectors, all four bulbs are 9005, and here is a link to those. www.amazon.com/SEALIGHT-9005-Installation-Adaptability-Non-polarity/dp/B0CM9CZ9HK/?th=1 If you have the normal style lights, the highbeams are a different number. Thanks for watching.

@Dezmond_Roman 3 ай бұрын

Hid is best with projectors

@RaymondLamb 8 күн бұрын

I may check into those for the projector housing ones, I've been hearing that a lot. Thanks for watching.

@user-fc6fl9nq7v 3 ай бұрын

Any check engines ? Or hyper flash ?

@RaymondLamb 3 ай бұрын

Nothing at all, had them in for a while now and everything still working perfect.

@AMunday1988 2 ай бұрын

Your bulbs are not oriented correctly, the led chips should point in a 3 and 9 orientation.

@RaymondLamb 2 ай бұрын

Yes and No, they do say in the instructions that if you aren't happy with the beam pattern you may want to adjust the housing to align just like what you suggested. I think if I did change anything it would only be for the high beam, since the low beam is in the round projector style housing, I don't think it would matter honestly. I've been 100% happy with the coverage and output, so in my particular case, I'm going to leave as is. Someone else might not be happy with it though. Thanks for watching and the tip!