21 күн бұрын
Пікірлер
@dsjhutch 9 сағат бұрын
Have the 350 bumper, replaced liners blew them both out within a day 😢
@rosmarcrespo3409 3 күн бұрын
Hello beautiful truck ,What is your tire size?
@RaymondLamb Күн бұрын
Hey, thanks so much. The tires are Toyo Proxes STIIIs and are 285/45R22. I did a video on those too here if you are interested. Thanks for watching. kzfaq.info/get/bejne/lbN0ZNmUvMzMm40.html
@mikeinvegas1 7 күн бұрын
Looks awesome. Is that a chrome paint in middle of bumper? Looks shiny like chrome
@RaymondLamb 7 күн бұрын
Hey, thanks, I was really happy with the way it turned out. I think you're talking about my Mishimoto dedicated oil cooler. The silver thing with the black "M" in the middle? I did a video on that too. kzfaq.info/get/bejne/jbOPmZd42be3ZKc.html Thanks for watching.
@mikeinvegas1 6 күн бұрын
@@RaymondLamb no the actual bumper. What color is it. The part goung across the middle. Is the bumper 2 different colors?
@RaymondLamb 6 күн бұрын
Gotcha, no, it's all black. There are some trim pieces that I left flat black, but the rest was painted gloss black to match the car. It may be the angle or reflection of something you're seeing that makes it look that way. If you have a time stamp in the video I'll look. But it's all black. Thanks again!
@mikeinvegas1 6 күн бұрын
@RaymondLamb ok awesome. I really like that bumper. I see some gt 500 front bumper that doesn't have the bumper part going across the middle. I like yours the best. Great look! How's the Quality of that one ? How much does a place charge to install one?
@westwasbest 8 күн бұрын
So this is only a solo kit for one side only? Other side remains fake? Kind of pointless
@RaymondLamb 7 күн бұрын
I see your point, and it would be nice for someone to make a custom kit that uses both sides and makes them functional. This is just to make at least one work like they should have from factory in my opinion and feed fresh air into the mopar cold air intake. It does do that nicely and this kit is waaaay cheaper than what Mopar charges. Thanks for watching!!
@westwasbest 7 күн бұрын
@@RaymondLamb I agree the price is definitely great, you did a beautiful job and it functions well, it would just bother me to have one open vent and one closed vent, maybe even if they had just an open vent that didn't go anywhere on the other side that would be acceptable, at least it would blow down into the engine compartment.
@bigamigo4863 14 күн бұрын
Did mine last weekend, this video was super helpful. It was definitely leaking from these original vents....to my shock none of the "flappers" were actually present on either!
@RaymondLamb 14 күн бұрын
Glad it helped you track it down. Thankfully the new ones I installed are still doing fine, wonder how long this new design will last. Thanks for watching.
@davidleslie949 15 күн бұрын
Thanks for the informative video. I couldn't remember what size the bolts were for the thermostat housing but I did remember that they need to be torque to 9 foot pounds when I heard you say got them tightened down real good that's scared me because you're going into aluminum. Hopefully you talked them to 9 foot pounds kind of just go back-and-forth a bit, snug snug and 9 ft/lbs that way you don't distort the thermostat housing. as far as the V6 fan you installed. It's not necessary. The electric fan that was already there which is on the smaller side, but perfectly adequate to move enough air even in traffic. You can remove the entire shutter assembly is what I did and then it allows for more air, but reconnect your shutter motor and find a piece of steel so you could make it into a bracket to bolt the shutter actuator to it. by placing a screw at the top and at the bottom, this will limit the amount of movement the shutter actuator can actually move, so as do not throw a fault code. Otherwise it will think it's not there and throw a fit with a check engine light. Not only will get better airflow, but shave off about 10 pounds from the front end, which is quite a bit considering how heavy the front end of a ram truck is. I removed my spare tire as well that saved a lot of weight. I'm gonna be taking off my front tow hooks and my trailer hitch. I think that'll be about 200 pounds I'll be saving altogether with those four items removed. Oh plus my front clutch fan just like you did. if you have any issues with cooling after removing the V6 fan if you do so, it might be due to not having the full fan shroud assembled? You may have had it off for the thermostat R&R as well? I just need to either figure out a way to cheat so my electric fan will come on at 180 F or I'll have to bite the bullet, and buy a tuner. Another cost saving trick or hack if you will is that I noticed a lot of the aftermarket cold air intakes aren't a lot different than the original one except for the fact that the side of the airbox is cut out so you could pretty much cut the bottom portion or some of the bottom portion of your airbox out as long as it's below the air filter to allow more air from the right side of your wheel wheel to come into the airbox, rather than it be so much more restricted. By cutting out the bottom portion of your airbox, he will look pretty much like the AFE or rough country version because they state that if you're in a really dusty or dirty climate to block off the rear portion of the cold air intake. When I looked at my own airbox, I thought to myself why hasn't anybody put out a video on this yet on how to modify their OEM airbox to make it more of a TRU cold air intake because it would be taking air from a lower height than the restrictive inlet. Keep on MODDIN
@RaymondLamb 14 күн бұрын
Thanks for watching and all that info. I made sure not to crank down on them too hard. I got a custom tune video I'm working on now and it tweaked the fan settings as well. That with the AGS delete, electric fan and the 180 thermostat, has been a game changer. While driving, it rarely ever goes over 185 on the coolant. Sitting in traffic it might get around 190 before the fan kicks on for a minute or so and drags it right back down. Very happy with the outcome so far. Thanks again!
@bloajmj2680 15 күн бұрын
The green ceramic coil is a resistor for a voltage drop for the two speed fan option. 3 terminals ,one is ground, one is straight 12 pass through (full speed), other is 12v through coil( slow speed) . Most people will only use high speed ,but two speed is an option.
@RaymondLamb 14 күн бұрын
Thanks for that info and for watching! I wish I could cut mine on at a lower speed, have it tuned to cut on earlier than stock, but it's high speed and sounds like a hurricane. Cools it off quick though. The other cooling mod videos I did have helped keep it nice and cool and stable.
@Sleepy731 15 күн бұрын
Bro. Just received my fan. Passenger side mount is broken just like yours. Box wasn’t damaged. Did you jb weld it? Did it hold up? The broken peice was at the bottom of the box. Almost as if they knew it was broken and shipped it anyways! 🤦♂️
@RaymondLamb 15 күн бұрын
Man that sucks. Same exact thing with mine, no damage to box, but it was snapped off. I did JB weld it and should have let it dry longer, but was impatient since I had everything ripped apart already. But regardless it's still holding strong and haven't had an issue with that piece. Hope you get yours all fixed up or get you a replacement. Thanks for watching.
@Sleepy731 14 күн бұрын
@@RaymondLamb amazon gave me a $50 partial refund. So l bought some jb welded it. Let it set for like an hour before install. Looks ok. The test will be if and when i remove it for any reason. Thanks for the video. Take care.
@michaelhampton4348 15 күн бұрын
The amount of hours I put my ram on ramps lookin for a damn crack under the truck smh lol awesome video man and thanks for the info!
@RaymondLamb 15 күн бұрын
Thanks so much for watching and glad it helped! I did the same, crawled under there multiple times, just knowing that it had to be coming from underneath. So far so good and no more leaks since I replaced the vents!
@joeheikes8147 18 күн бұрын
Hey Raymond, fantastic video for me. Very helpful. Based on your guidance I pulled the trigger on buying this Mishimoto transmission cooler for my 2022 GT, even though Mishimoto says it won't fit (CJ Pony parts DOES indicate fitment through 2023). Anyway, everything was going according to plan when I hit the interference between the transmission cooler lines and the A/C line that you talked about. I saw in the comments from a couple of years ago that you never bothered with trying to have the A/C line re-routed or anything so as to properly get the condensor tab to fit into the slot on the radiator. Have you still had no issues? Has your A/C kept working alright for the last couple of years, lol? I'm going to sleep on it a bit before buttoning the car back up and taking my chances as you did, but I thought I would ask if you have any more wisdom to share now a couple more years down the road. Like you, my transmission keeps getting too hot on track, and I'm getting tired of cutting sessions short, etc. Had to try something.
@RaymondLamb 15 күн бұрын
Hey, thanks for watching! I actually sold the car a little while back and looking for another project. But after the install, I did drive it quite a bit and tracked it several more times and there was never any issues for me. The way it is wedged in there, I wasn't too concerned about there being an issue, and me personally, I never had one. The cooler did help on the track, but on days that were extremely hot (90+) it was still hard to keep it cool. The problem that I saw and researched is that the thermostat in the transmission doesn't open until it's already so hot, that's it's hard for it to bring it back down quickly. But overall, I still thought it was worth it and helped. Good luck with yours!!
@brianfreland9065 19 күн бұрын
i just bought mine yesterday! same color and everything haha! im really excited to have it and start my MOPAR journey!
@RaymondLamb 19 күн бұрын
Awesome, good luck with it and hope you enjoy. I still really love mine. Thanks for watching!
@Moment2Forever 21 күн бұрын
My truck sits nearly a half inch lower on the driver side even before lowering but I heard it's a common issue
@RaymondLamb 21 күн бұрын
Might be from the gas tank on that side. I've heard to that can cause it to not be level side to side. Just a guess though. Thanks for watching!
@Moment2Forever 21 күн бұрын
I'm running max track 2 inch lowering springs and they're noticeably softer than stock, so I'm wondering if these are better
@RaymondLamb 21 күн бұрын
I feel like they are very close to stock, maybe a little softer. I don't tow or haul often so it would be hard for me to compare.
@BraxtynMyers 28 күн бұрын
Good vid👍
@victorortega2718 29 күн бұрын
Your amazon link says they do not fit the 2017 ram 1500 ?
@RaymondLamb 28 күн бұрын
Thanks for letting me know. I wonder if they changed something. On mine, with the factory style projectors, all four bulbs are 9005, and here is a link to those. www.amazon.com/SEALIGHT-9005-Installation-Adaptability-Non-polarity/dp/B0CM9CZ9HK/?th=1 If you have the normal style lights, the highbeams are a different number. Thanks for watching.
@Moment2Forever 29 күн бұрын
Are the middle lights functional or accent lights only?
@RaymondLamb 29 күн бұрын
They are definitely functional, I tested them to see how bright they are. Like a concentrated foglight beam. Maybe about as bright as the low beam led lights but in a tighter pattern. Hope that helps.
@jvallieres1979 Ай бұрын
That was me last weekend. Dry now.
@ivanmurrieta9594 Ай бұрын
Can u still put the rt badge on the chrome grill?
@RaymondLamb Ай бұрын
You could, you might have to adjust it slightly to fit the holes in the chrome grille the way you want it, but I think it would work. Thanks for watching.
@aleinabailey Ай бұрын
❤❤
@mark1756 Ай бұрын
Morimotos would go well with that drl foglight . Thats my plans for my blue ram. Great video!!!
@RaymondLamb Ай бұрын
I agree, but they think very highly of them with that price tag lol. If I had the standard lights I'd definitely do it, but since I have the projectors, I'll probably stick with them. Thanks for watching, good luck with yours.
@mark1756 Ай бұрын
@RaymondLamb thanks bro!!
@ffhillclimber9858 Ай бұрын
At the beginning of your video shows 20 inch wheels but 19 inch wheels. I imagine both are 19 inch. Just a typo I’m sure.
@RaymondLamb Ай бұрын
Good catch, can't believe I did that and it's been on here that long and never knew it lol
@Moment2Forever Ай бұрын
The stock sport wheels are around 33 to 34 pounds, cast 22s are probably 40 plus lbs, one reason I ended up not getting them, I was looking at those exact wheels
@RaymondLamb Ай бұрын
Thanks for the info. I still like the look of them, but man are they heavy compared to what came off. If something happens to them or I need to replace, I'm going to look for something more lightweight for sure!
@troyvan6952 Ай бұрын
Check out CT Sounds they're website has separates (components) that fit S550 Mustangs. I have them in mine... great speakers.
@RaymondLamb Ай бұрын
Hey, thanks for the info!
@TroyRossberg Ай бұрын
Could you have installed the trans cooler under the car & did you have any issues with the rubber lines with the hose clamps popping off the transmission lines do to the high pressure of the transmission fluid
@RaymondLamb Ай бұрын
Hey, do you mean accessing it and installing from the bottom side under the car, or am I misunderstanding? If so, I don't see how you could, not saying you absolutely can't, just that I think it would be very difficult. The way it's bolted to the radiator and everything slides in from the top, I don't think they would be a way to do it from the bottom side. I tracked the car multiple times after this upgrade and never had a problem at all with the lines, leaks, etc. everything held up great. Hope that helped.
@TroyRossberg Ай бұрын
@@RaymondLamb Mounting the trans cooler on the underside of the car like near the rear bumper
@RaymondLamb Ай бұрын
I'm with you now! I suppose anything is possible, but I think you'd have a hard time getting it mounted at the right angle back there or underneath somewhere, in order to keep enough air flowing through it to keep things cool. Then you'd have to worry about rerunning the lines too. I had the GT500 front bumper and had thought about moving it to the air intakes in the corners, but never did because this worked out well. Good luck with whatever you decide!
@MarioTorres-yc7nx Ай бұрын
Delisioso viejon
@rooftopazn18 Ай бұрын
so if you leave the top and bottom shutters in, the check engine light wont come on?
@RaymondLamb Ай бұрын
So far so good with mine. There may be other ways of doing this, but I haven't had any trouble yet, and it's kept the temperatures from fluctuating so much while driving, still happy I went this route. Thanks for watching!1
@johnsn10 Ай бұрын
There is supposed to be a 3rd tab in the middle that’s about an inch long. Your must have broke off
@RaymondLamb Ай бұрын
Interesting, I didn't notice anything. If that's the case, thankfully everything is still holding together just fine and in place, looks like factory still and hasn't come loose. Thanks for watching!
@keithfabin1302 Ай бұрын
Outstanding Video
@RaymondLamb Ай бұрын
Thanks so much, and thanks for watching!
@troyvan6952 Ай бұрын
Hi Mike Would this work on a 2016 Shaker with the Sub? Car is a Mustang GT Thanks
@RaymondLamb Ай бұрын
I imagine it would, but I think the code you might need could be different. I've read articles where different year models with other options require a different code than what I used. Good luck with it if you try it. Thanks for watching!
@dtaposse8858 Ай бұрын
U need to quit doing burnouts,lol
@dtaposse8858 Ай бұрын
Good job buddy always enjoy your videos
@AMunday1988 Ай бұрын
Your bulbs are not oriented correctly, the led chips should point in a 3 and 9 orientation.
@RaymondLamb Ай бұрын
Yes and No, they do say in the instructions that if you aren't happy with the beam pattern you may want to adjust the housing to align just like what you suggested. I think if I did change anything it would only be for the high beam, since the low beam is in the round projector style housing, I don't think it would matter honestly. I've been 100% happy with the coverage and output, so in my particular case, I'm going to leave as is. Someone else might not be happy with it though. Thanks for watching and the tip!
@kreazyd Ай бұрын
Just finished rebuilding my top end do to lifters and cam failure (Hemi tick). I will probably do this ASAP. I have 136,000 miles. Thank you.
@RaymondLamb Ай бұрын
Going to keep an eye on it and see how much it starts collecting. I don't drive a ton, but it's a nice peace of mind! Thanks for watching.
@marcustolentino8896 Ай бұрын
Great vid. Just ordered these since troubleshooting points to these leaking. No water or dampness around brake light, i.e., surrounding headliner area. Noticed water in the storage compartments under the back seats after some pretty heavy rain (Florida). Also right under the vent (both sides). New vents around $9.00 plus shipping. Truck is a 2015 Ram 1500
@RaymondLamb Ай бұрын
Sounds just like the issue I was having. So far so good with mine and the replacement, no more leaks still. Hope you get it fixed up and that solves everything for you. Thanks for watching!
@UnknownSpirit222 Ай бұрын
I’m going in September. Can’t wait. Gonna visit a few places near by too.
@RaymondLamb Ай бұрын
It's a pretty place for sure. Hope you have a great time!
@venomrogue1 Ай бұрын
I used an Allen wrench. Put short end in pulley, long end to tensioner. I then used a large channel locks pliers to turn fan nut. Worked great. There are two zip ties on that wiring. Look in that vertical grey support. Remove them and there’s enough slack.
@RaymondLamb Ай бұрын
Hey, thanks for those tips! I'm going to check on the wiring if I have to redo my connection. Thanks for watching!
@jloilseparatorco.1853 Ай бұрын
Thanks for sharing!
@RaymondLamb Ай бұрын
You bet! Great product!
@Bodezafa Ай бұрын
Looks Awesome. I ordered some the other day, can't wait to install them. Thanks for the video!
@RaymondLamb Ай бұрын
Thanks! They're still working perfect, no issues.
@Bodezafa Ай бұрын
Looks Sweet!!
@RaymondLamb Ай бұрын
Thanks! I was happy with the results and still holding up just fine.
@MVigil007 Ай бұрын
Great tutorial! It worked amazing on my 2018 explorer
@RaymondLamb Ай бұрын
Glad to hear it helped. I know some vehicles have different codes. Thanks for watching!
@markwithamaxima2680 Ай бұрын
Yup I'm buying it for my '12 ram hemi
@RaymondLamb Ай бұрын
I still really like mine and no problems with it. I keep thinking about doing a full exhaust, but I've been happy with this setup. Thanks for watching.
@philo_beddoe4367 Ай бұрын
I got the double whammy on my 2016. 3rd brake light and the cab vents. Unreal how poorly this was designed. And still even models as recent as 2021 and 2022 have the leaking issues.
@RaymondLamb Ай бұрын
I know it, crazy that the little rubber flap is all there is to it and they break off or disintegrate so easily. I haven't run into the brake light leak yet, but I'm sure it's just a matter of time! Thanks for watching.
@travlite8496 2 ай бұрын
Well it would have been nice to see HOW the things come out!
@RaymondLamb 2 ай бұрын
LOL, I hear you. It was so easy though, I showed in one part, just push down on them and they'll pop right out for you. Nothing to it! Hope that helps a little.
@dtaposse8858 2 ай бұрын
Pretty truck my friend enjoy your videos
@RaymondLamb 2 ай бұрын
Thanks so much!
@dtaposse8858 2 ай бұрын
Dem dare pro chargers ain't cheap
@RaymondLamb 2 ай бұрын
That's for sure! Big ticket item with the procharger!
@dtaposse8858 2 ай бұрын
Left the 2 top and bottom fins on,no probs,guess I'm smarter than the one who designed it
@dtaposse8858 2 ай бұрын
Good job buddy,I took mine off,I want all the air to my engine I can get
@RaymondLamb 2 ай бұрын
I thought about taking them all off, but will wait just a little longer.
@Baeza_5.0 2 ай бұрын
lund racing for tuning
@RaymondLamb 2 ай бұрын
Thanks, I'll have to check them out.
@dopeboyp3487 2 ай бұрын
I appreciate the time and energy you put into this. Thank you! How is it going through the carwash? And I know it’s designed to be flexible, but does it spring back upright, or does it start to bend any and lose its shape. Just ordered the 8in for my 2024 AT4 1500.
@RaymondLamb 2 ай бұрын
Hey, thanks for watching! I have not taken it through the car wash, so I can't comment on that part. But so far it will bend and flex in the wind, etc. but still is perfectly straight. Still very happy with it. Hope that helps.
@dopeboyp3487 2 ай бұрын
@@RaymondLamb Thank you. Have a great weekend brother!
@jasonward759 2 ай бұрын
Nice truck
@RaymondLamb 2 ай бұрын
Thanks, appreciate it!