led light bar roof mount brackets build easy and no $$$$

Рет қаралды 92,306

Күн бұрын

In this video we will fabricate from scrap metal mounting brackets for the led light bar this is
the led light bar we used.
#kevinrobinson6688 #LedLightBar
YITAMOTOR 52 inches Curved Led Light Bar amzn.to/2putSvd
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
Keep it real & clean.
Help Support My Channel paypal.me/kevinrobinson6688 Thank You.
Fan Mail kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123

Пікірлер: 89

@tuckern3001 5 жыл бұрын

you should definitely make those and sell them i would buy a set.

@bunkertroll8111 5 жыл бұрын

Thanks sir👍🏼

@anthonyjr0069 3 жыл бұрын

Well done. Easy and straight forward as I thought it would be. Just wanted to see if it had been done. Thanks for the reassurance

@Robinson-Homestead 3 жыл бұрын

Thanks for the comment glad to help Merry Christmas my friend.

@skinzz57 4 жыл бұрын

Grate job keven im going to do the same...

@Outdoor_Nathan 2 жыл бұрын

Great job!

@Bigtwin88 6 жыл бұрын

Another great job from Kevin.... Thank you ....

@Robinson-Homestead 6 жыл бұрын

Thanks Donald.

@danhold1 6 жыл бұрын

nice job guys

@Robinson-Homestead 6 жыл бұрын

Thanks Dan.

@9880865 6 жыл бұрын

Thx for the video . Got it done in 4 hours painted and assembled . Gave me the motivation to do it .

@Robinson-Homestead 6 жыл бұрын

Thanks for watching glad to help.

@austinklinefelter8297 Жыл бұрын

It looks really good it’s a little lower than the commercially made brackets but I like it

@Robinson-Homestead Жыл бұрын

Thanks for the comment Austin it works.

@girlmastergeneral 4 жыл бұрын

awesome

@Robinson-Homestead 4 жыл бұрын

Thanks for the comment.

@nemonespider 3 жыл бұрын

Good stuff nice and simple

@Robinson-Homestead 3 жыл бұрын

Thanks for the comment hope it helped.

@NtulkSlzX Жыл бұрын

W dad

@Robinson-Homestead Жыл бұрын

Thanks for watching.

@HillBillyDesigns 6 жыл бұрын

Great job ! Kevin

@Robinson-Homestead 6 жыл бұрын

Thanks hillBilly bro.

@williammcguire3rd 6 жыл бұрын

Awesome job looks great!! Your so creative!!!

@Robinson-Homestead 6 жыл бұрын

thanks William.

@dannydunnagan3267 6 жыл бұрын

looks nice Kevin.

@Robinson-Homestead 6 жыл бұрын

Thanks Danny.

@lwfitz6479 6 жыл бұрын

Well done! I bought $100 brackets and just sent them back

@anthony8881 6 жыл бұрын

Very good well put together video sir

@Robinson-Homestead 6 жыл бұрын

Thank you for watching.

@jwright650 6 жыл бұрын

Nice work Kevin

@Robinson-Homestead 6 жыл бұрын

Thank you jwright650.

@SuperStones2009 6 жыл бұрын

Hell yeah bro my commander looks awesome with your setup on it and my 52" bar.... great teaching skills to bro..

@crozza79 4 жыл бұрын

D stone. Got a pic?

@jeremymoreside1444 3 жыл бұрын

No one sells brackets for an equinox/terrain. I wish i had a brake and shop like yours

@Robinson-Homestead 3 жыл бұрын

Sorry I wish I could help.

@joaquin923100 3 жыл бұрын

Ive been looking for these because i want my led bar in front of the windshield not the roof top

@Robinson-Homestead 3 жыл бұрын

Fun build you can do it thanks for the comment.

@DeliberateNRandom 3 жыл бұрын

If you want to mock them up with something more rigid that will retain it's shape, just use some thinner sheet metal, or thicker aluminum foil. You may want to add packing tape so it doesn't rip easily.

@Robinson-Homestead 3 жыл бұрын

Thanks for the idea Ben.

@MrMazda-yw1cr 5 жыл бұрын

Nice!... I made my light bar mounts out of a barn door hinge lol... they are mounted on my car that’s in my profile picture Edit: I bought the hinge for under $10

@Robinson-Homestead 5 жыл бұрын

Cool thanks for the comment Mr Mercury.

@kalebbowler5254 2 жыл бұрын

hey, got a 40 inch light bar that Im throwing on my ranger and can't seem to find any mounts, how did you do yours?

@cuttintrees2004 4 жыл бұрын

I'd buy some

@Robinson-Homestead 4 жыл бұрын

Thanks for the comment.

@gaminredneck5216 5 жыл бұрын

I bought some brackets for like $14 through amazon and bent them to fit my truck

@Robinson-Homestead 5 жыл бұрын

Thanks for the comment.

@MrChrisk858 4 жыл бұрын

What length light bar and straight or curved?

@mulespur4806 5 жыл бұрын

Vibration cracked mine and I didn't know and light fell and cracked windshield one day when I stopped at red light and I used 3/16" steel so the bolts will hold but metal not so much

@brockdyncatron3775 3 жыл бұрын

3/16 cracked from vibrations? Yea ok.

@jgoff4415 6 жыл бұрын

I use pop rivets

@Robinson-Homestead 6 жыл бұрын

That will work to thanks.

@MultiJaz1 3 жыл бұрын

can u make a set for me for my 78 stepside? I'd much rather pay you guys.

@Robinson-Homestead 3 жыл бұрын

Sorry, thanks for watching.

@basharatullah285 6 жыл бұрын

Nice video can you please tell me how bright the light is and what make is it I'm thinking about putting some lights on my truck

@bentrishaleemartin926 5 жыл бұрын

What about windnoise and glare I have tried several different light bars with different brackets and the wind noise is crazy.i wound up buying the magnetic brackets and moving the light bar back a little.. no noise and absolutely no glare.. just what I had to do on my 2010 Tahoe and 2003 suburban

@Robinson-Homestead 5 жыл бұрын

Thanks for sharing Ben.

@Mrkergad 6 жыл бұрын

Great Design! But the light bar is a bit too much on the windshield. Is possible to use the same technic to install further back?

@LJ20049 7 ай бұрын

It’s supposed to be flush with the top of the truck

@613Builds 5 жыл бұрын

good job man. i just made a set also for a 50" bar on my current project stormtrooper. i should have a video up in a day or two

@Robinson-Homestead 5 жыл бұрын

For sure on the video thanks for watching.

@613Builds 5 жыл бұрын

i made pretty strong brackets, exporting the video as we speak, it should be live in an hour or two.

@CyberZ0ne 4 жыл бұрын

yeah, Easy to make, aslong as you gotta sheet metal bender :/

@brockdyncatron3775 3 жыл бұрын

There are ways to do it without a brake. Your imagination is the limit🤘

@Tanhands36 2 жыл бұрын

Nice video. After 4 years how are the screws to the cab holding up?

@Robinson-Homestead 2 жыл бұрын

Not sure he sold the truck

@clintwhitesinger677 6 жыл бұрын

What’s your measurements of your brackets I have similar truck I like the location on your mounts

@chinito20fam 5 жыл бұрын

So I searched on line exact same bar but I the holders as I call them they have to be mounted in on the roof seen many videos hanging right above the roof but yea can I get in trouble with installing them on the roof?

@jordanrogers4348 5 жыл бұрын

Rodolfo Mendez i would worry about leaks on the roof from screws

@robormiston2841 3 жыл бұрын

Do you get glare on the windshield mounted there from the lightbar?

@Robinson-Homestead 3 жыл бұрын

Good ????? I will have to ask my son that one for you thanks Rob.

@DarkBykeTwitch 4 жыл бұрын

Where did you get that metal though?

@alonzowitt5931 3 жыл бұрын

Kevin these brackets are between $16,00 to $25,00 bucks a set on ebay!

@Robinson-Homestead 3 жыл бұрын

good to know thanks Alonzo

@alonzowitt5931 3 жыл бұрын

@@Robinson-Homestead nice job on the bracket's!

@DanMcD80 6 жыл бұрын

after driving did you find you needed gussets in the bends?

@nicholaspap7197 6 жыл бұрын

Was the originall thickness good enough??

@elitem3 5 жыл бұрын

Ebay 2017 f150 $25 free shipping no tax lol

@Robinson-Homestead 5 жыл бұрын

Thanks for sharing.

@aaronscarlata9414 4 жыл бұрын

What kind of light bar is that

@Robinson-Homestead 4 жыл бұрын

Sorry it took so long YITAMOTOR 52 inches Curved Led Light Baramzn.to/2putSvd

@chrisrasmussen5018 6 жыл бұрын

That hardware will more than hold. Many of the bracket kits use pop rivets to hold

@Robinson-Homestead 6 жыл бұрын

Thanks Chris.

@chrisrasmussen5018 6 жыл бұрын

Oh yeah. Your mods on the runaway has been a huge contributing factor to my decision to go with that brand. Thanks for what you do!

@joeryvanossel4601 4 жыл бұрын

I did exactly the same thing on my ford custom. But once going over 60mph, the cooling fins on the led bar start resonating with the wind and you get this fucking loud whine noise >.< Had to take it off, it was just unbearable

@ThatFoolChrisDailey 4 жыл бұрын

Ive read that you can put some rubber tubing or weather seal on the fins and it should help with the whistling that you're talking about. I havent tried myself yet since i dont have a roof mounted bar but it maybe worth the shot

@STUNTER626 4 жыл бұрын

Angle of the light and they make rubber pieces that snap into the find so they wont vibrate but i have only had the humming noise when doing 80+mph