Lee Precision 50th Anniversary Challenger Kit Setup and Overview Part 2

Рет қаралды 271,280

14 жыл бұрын

AMAZON Store: amzn.to/2H7Lq6Y
PATREON: / iv8888
JOIN USCCA LEGAL SELF DEFENSE NETWORK: usccapartners.com/IV8888
CHECK OUT OUR MUSIC CHANNEL: / guitarsenal
Sorry for taking so long to get this up...Working on part 3 now.
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZfaq) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories or otherwise to change their basic legal function. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance we include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.

Пікірлер: 80

@RETIREINARIZONA 13 жыл бұрын

Hey, You recieve 3 Breech lock bushings with the kit,they are removed with the die so you don't have to Unscrew every die,just push the black lock button,twist the breech lock insert and it comes out with the die all set up. I also purchased the LEE locking breech lock holders, Once set and locked they never come out of adjustment. $10.00 a pair,worth the extra money.

@wtom1420 6 жыл бұрын

Priming is done during decapping. I have an Auto drum powder measure set on the powder through expander die, so it really makes the process faster.

@robertsimpson7381 9 жыл бұрын

Well done video. Very informative without getting overly technical. Thank you for your service.

@bloodruststaples 4 жыл бұрын

Being a fresh beginner, I just bought this kit, I'm weary of the price, but reviews and even the local yokels at my sporting good stores say it works fine. Waiting for it to show up. Really stoked to start loading ammo!

@busajockey 7 жыл бұрын

the sound of the primer popping out is awsome lol . doink .

@jamesduda6017 4 жыл бұрын

Thank you! One of the best videos I've seen in a long time!

@Peter421 12 жыл бұрын

Great video, I'm yet to shoot my AR build, waiting for my upper receiver but I am very interested in reloading and this video taught me everything! Love how you were specific about everything and showed results and what you want to see to get results. Thank you!

@326madisonband2 9 жыл бұрын

All three installments of your demo procedure are done well.

@Nathan-og3br 7 жыл бұрын

I'm considering reloading this is the best video I've found so for thank you

@lsweik 14 жыл бұрын

The easiest to follow reloading video I've seen so far, Thanks

@BassOntario 6 жыл бұрын

Excellent info. I bought this exact unit. This helps big time.. well done

@l2andom 13 жыл бұрын

Very good videos. Extremely informative and helpful as I am a beginning reloader also using the exact same kit.

@jeffball9719 6 жыл бұрын

You've taught me a lot in this video thanks nicely done👍

@kendallsmith4629 6 жыл бұрын

As always, great video. Thanks

@ooweesaler 6 жыл бұрын

Excellent thanks for making the effort. Very clear.

@andreass2799 Жыл бұрын

You are a great instructor!

@kuva07 14 жыл бұрын

you're videos have really gotten 100% better looking; they look professionally made with all the camera angles, editing, and the High Def. Its too bad youtube is only letting you put 10 minute segments on again... oh well.. still an awesome job

@stewcan8 11 жыл бұрын

Love to see part 3

@stefanfrank4043 4 жыл бұрын

Great video & greetings from Germany!

@comack2011 12 жыл бұрын

Great vid!!

@Justin-fk9km 10 жыл бұрын

@be lue The grain of the bullet is different from the amount of powder (grain). For example, if he is loading 45 acp. He may use 3.6 grains of Bullseye powder to accurately deliver a 230 grain projectile down range.

@Tqtrpiypuu 10 жыл бұрын

To elaborate a little a grain (gr) is simply another unit of measurement for weight like pounds (lbs) bullets are measured in grains but so is the powder charge. There are 7000 grains in a pound so it is a very small unit of measurement. Hope this helps a little.

@KOK678770 5 күн бұрын

If you will use depriming die before cleaning the brass, your cases and sizing die will be way cleaner.

@stephenknecht7189 5 жыл бұрын

When you're depriming a case safer it's been fired, do you clean it out line or before you run it thru the depriming die.

@rgunzy1234 11 жыл бұрын

excellent video! Just got one of these today and will start reloading tomorrow.

@Patriotusa44 4 жыл бұрын

Bet you are a pro now.

@chavezchavez556 13 жыл бұрын

This is the best video on this press I just bought this press. Quick question what is the difference between large and small handgun primers ?

@joefriday950 5 жыл бұрын

Thank You

@Cube210 12 жыл бұрын

You have extra Breech Bushings but yet you unscrew your dies after having set them?

@clinteastwood9115 5 жыл бұрын

Best press for the money!

@chavezchavez556 13 жыл бұрын

This is the best video on this press I just bought this press. Quick question what is the difference betwee

@hangemhigh2000 14 жыл бұрын

It doesn't get any better.

@hottieprowelder 11 жыл бұрын

very cool, really need to learn how to do this from a pro. i really do as i am becoming a shooter, what kind of savings verses buying rounds?

@Mile66 12 жыл бұрын

Do you clean the primer pocket every time? Although you didn't show it, I assume you do it. There's always some residue, many times very little of it. Is it necessary or advisable to clean it every time? I do it just in case, right after de-priming the brass. Thanks! Great videos, I watch them often, as I learn how to use my press.

@brianveitenheimer4492 4 жыл бұрын

Thank god you made this. The Lee site is awful and assumes you know everything about the product and process. Lee needs to hire you to do all its product intros. You just sold me on buying this kit.

@mmkropp 14 жыл бұрын

i ordered the same press, the dies i need, the bullets and primers, but what powder do i get. i am ordering from graf and sons

@Medmann48 7 жыл бұрын

Can you just get the press & the dies & call it a day? Do you really need this whole 50th anniversary kit with all the bells & whistles?

@ElDub50 10 жыл бұрын

Is there any reason you don't re-prime during the de-prime/resizing cycle? Prob doesn't matter, just curious. If you changed the powder feed to load through the flaring die, you would have to reprime during the sizing cycle.. Also, well worth buying extra die bushings. They're ~$10 for a 2 pack. With a bushing for each die you do the adjustments, lock it in and from then on you just have to drop in the next die and no readjustment is necessary.

@Tqtrpiypuu 10 жыл бұрын

You need to clean the primer pocket out before re-priming to insure the primer will seat fully. They make a tool to do this by hand, it's only a few dollars.

@larryhayes9700 10 жыл бұрын

Tqtrpiypuu just like his demo, cleaning primer pockets on handgun rounds is seldom necessary. If the previous primer was seated, not much chance of problems developing between depriming and repriming. Can't hurt of course, but just not a requirement.

@Lyrikz74 13 жыл бұрын

Say you have ammo that has been fired. When do you trim the cases?? Is that needed?

@plumberjoe80 14 жыл бұрын

Hey dude the primer catcher works way better with the little tin plate installed on the side of your press. It should have came with your kit. maybe you know, I just don't like spent primers everywhere.

@fighting17chicago 14 жыл бұрын

Finally got it uploaded?! Congrats on try 5 or 6 I guess!

@andrewandbrandon 10 ай бұрын

Where is part one?

@Alex-ib6tm 4 ай бұрын

Hey Eric, is there a website or manual that you trust more so than others for the specs of reloading?

@HeavyDeeberz 11 жыл бұрын

when do you case trim.

@bencook2104 11 жыл бұрын

erver heard of midway arms 7.62 x39 ?

@makun16 14 жыл бұрын

@Iraqveteran8888 Handbrake from my own experiences works pretty well most of the time. What native format does your camera record too?

@mocatz187 14 жыл бұрын

I have a RCBS press and I can't find an auto prime in stock anyplace are those antiques? I searched google and everyone is sold out. If I can't get an auto prime does that mean all of my equipment is useless? I have bought everything including casting equipment and I can't figure out how to prime my cases. All video and literature mentions this elusive "auto prime " thing. I saw a hand version at the gun show for $85.00 dollars but I thought that was a bit high but now I know.

@ECTBWHO 14 жыл бұрын

Nice

@sherryromaine8163 10 жыл бұрын

how much does this kit cost at moss?

@APACHE529CREWCHIEF 4 жыл бұрын

Is sizing 300 win mag supposed to pose some sort of problem or something

@reydls4314 4 жыл бұрын

Just ordered one myself tired of the long lines at the gun shop (California)

@paperkiller25 14 жыл бұрын

@Iraqveteran8888 Have your service provider come check the line for noise. If your drop line from their box to your house is bad you will get noise degrading your signal. If thats ok eliminate the splitters from your drop line to your modem. This will reduce your signal noise to a minimum and improve your connection. I spent 20 bucks at Home Depot and ran new Co-axial cable through the attic to bring in new fresh outdoor spec co-axial line. (outdoor spec line is beefier and holds up better. )

@milboltnut 8 жыл бұрын

I saw a primer bounce off the table... not in the tray.

@italianrelic 14 жыл бұрын

what powder measure are you using in this video?

@Shmucko21 10 жыл бұрын

Would something like this be very worth it if i have a .45-70 bullet? At 2 bucks a bullet where i live, would this save me alot of money? (Not to mention it just seems really handy to have)

@humansvd3269 4 жыл бұрын

Yes. 45-70 is a must for reloading.

@makun16 14 жыл бұрын

@Iraqveteran8888 You should encode it to divx, it will dramatically shrink the file size and still retain good quality.

@belue2429 10 жыл бұрын

4 grains?? Sorry, not sure how much that is. How much is the grain for the bullet?? I'm usually shoot 115 grain bullets so how does 4 grains compare to that?? Thx

@2142Unknown 13 жыл бұрын

How do you discharge the static in your body?

@humansvd3269 4 жыл бұрын

Just touch metal.

@outlawmel9056 6 жыл бұрын

Can you do .308 rifle ammo in this?

@hebee81 10 жыл бұрын

Do u not clean your brass?

@makun16 14 жыл бұрын

@Iraqveteran8888 That is great that I has high quality output but it does no good if you are not able to upload that same quality all the time. I would try playing with the MPEG or AVI format if it will record in that format. It is must easier to manipulate because of there being so many programs out that will handle it. It sounds like the camera records in a proprietary format, making it difficult to find suitable apps to process it for upload.

@Elksniffer1 13 жыл бұрын

in your honest opinion is this a good starter rig?

@Hunt.Shadow 4 жыл бұрын

Спасибо👍👌

@Rhyno430 13 жыл бұрын

@chavezchavez556 Small primers are smaller, Large primers are large. You use small in like 9mm. Large in like .45acp I believe.

@bbowling4979 6 жыл бұрын

Some .45 acp takes large primers and some, believe it or not, takes small primers.

@tommcallister7893 8 жыл бұрын

Can you re-use the primers?

@nate3743 8 жыл бұрын

No.

@practicalskills 14 жыл бұрын

do you clean the brass before or after depriming?

@bbowling4979 6 жыл бұрын

Wet cleaning is done after depriming. Dry cleaning can be done before or after. Doing it after prevents media from getting stuck in the primer pockets.

@2bfrank657 17 күн бұрын

Where's part 1?

@iiNeVeRShOOt 12 жыл бұрын

couldn't you prime and de-prime in one operation?

@bbowling4979 6 жыл бұрын

You can if you're not going to clean the brass after depriming.

@DaytonaRoadster 14 жыл бұрын

@Iraqveteran8888 gotta love comcast huh? lol

@ssyoumans 5 жыл бұрын

Love Lee reloading tools but this is the worst press Lee has ever put out for a right handed person. When running the press up with your right hand, you then have to take your right hand off the lever to actuate the safety prime feeder, and then put your right hand back on the lever and lower the ram. Horrible ergonomics. The safety prime should have been on the left side of the press where you operate the ram up and down with your right hand and feed cases, operate the primer feed mechanism and remove cases using your left hand. I hate this press for this reason.