Left side controls on a budget for the Honda Ruckus

Рет қаралды 4,592

5 жыл бұрын

The final and most difficult part of the upgrade was the driver left side controls.
You know the one with the signals, horn, and high/low beam.
All in all, this was a good experience. I like the controls and how they clean up the bars. NOW all I need is new bars.
Please enjoy and please try to use the links to help the channel out.
Guide to the wires off the stock harness and what they connect to on the aftermarket controls.
bit.ly/2Nfkg13
Throttle Control:
amzn.to/2YOpqmD
Right Side Controls:
amzn.to/2Yt11HS
Brake Levers:
amzn.to/2YP65Su
Push Button Start (Momentary switch)
amzn.to/2YxmSOr
NOTE: I am not an expert but more of an enthusiast who is trying to build experience. Please feel free to ask questions in the comments or resources like 49ccScoot forums on the internet (Great Place!)
For China bikes for SURE go to Chinariders.Net
NEW PARTS STORE:
All the HONDA RUCKUS Stuff I used and All Available Lifan KP Mini parts.
shop.SEVProductions.com
NEW Patreon Page! Want to support the channel?
/ smallengineve. .
Facebook [Give me a like]
SmallEngineVelocity/
KZfaq [Like and Subscribe]
/ smallenginevelocity
Instagram
@SmallEngineVelocity
Canon EOS M50 with EF-M 15-45mm (My camera)
amzn.to/31tBook
Movo VXR10 Hot Shoe Directional Mic (My Mic)
The best sound of ALL the mics I've purchased
amzn.to/31Db0bM
GoPro Hero 7 Black
Just go with the best. It's worth it
amzn.to/2IBxJwa

Пікірлер: 25

@GrowYourOwnFun 2 жыл бұрын

Awesome man. Plan on buying this rig off your website

@SmallEngineVelocity 2 жыл бұрын

I made a few and make more as I have time :)

@jtktam 5 жыл бұрын

i suggest you get a new pin kit and make a new subharness vs using those crimp connectors. it's much cleaner and gives a factory look :)

@SmallEngineVelocity 5 жыл бұрын

That’s what I was thinking and I’ve never done that before , pretty easy ?

@jtktam 5 жыл бұрын

@@SmallEngineVelocity yeah, make sure you get a kit with the de-pin tool so you can push out the pins from the plugs.. i end up reusing a lot of plugs and just get new pins

@traff7mm7 2 жыл бұрын

Hey Cesar what did you do about the brake sensors on both side, the levers DONT have the spot like the stock levers.

@littlejoey4756 5 жыл бұрын

Nicely done brother.

@motorbikecam5172 5 жыл бұрын

Sweet!

@Smallbore2wheels 5 жыл бұрын

Nice! I may need one...or two of those soon. But I might just keep the stock one on the ruckus. #patreonsquad

@bumwithakeyboard1360 Жыл бұрын

Are you using the stock brake cable? I am doing this exact setup but for some reason my brake doesn't have enough slack. The right side was fine.

@hebnersamuel6280 11 ай бұрын

Hey, are there different levers that you can actually use the adjustments instead of just running them through?

@Sandrasboo 4 жыл бұрын

So where did the kill switch go? How did you ditch it? I'm looking to do the same. Thank you 😊

@arnoldgarcia9827 2 жыл бұрын

On this brake lever you can add the brake switch if I wanted to put one on my right side since I don’t have disc on front ,? So I can order the pair

@everettm7906 Жыл бұрын

Ive got a wire hanging loose with two prongs that's supposed to go in the switch but only rear turn signal is affected. Anyone know if i need a new part? Id rather not buy one

@roywalls5595 5 жыл бұрын

I am doing same thing Ceasar but to hot work on it & wires are mess all different colors when hot under tin roof!!

@nicholasventura4107 2 жыл бұрын

What did you do cut off switch

@nicholasventura4107 2 жыл бұрын

What did you do cut off switch?

@gsxrdoug7521 3 жыл бұрын

Did you ever get anything worked out with Jus4show? A plug and play would be awesome.

@SmallEngineVelocity 3 жыл бұрын

smallenginevelocity.com I made some :)

@joshpilger9594 3 жыл бұрын

@@SmallEngineVelocity are they for sale?

@SmallEngineVelocity 3 жыл бұрын

Smallenginevelocity.com

@SmallEngineVelocity 3 жыл бұрын

Yes for sure , one left

@juicyj3989 3 жыл бұрын

i ordered one off amazon and installed it but the right blinker doesnt work

@SmallEngineVelocity 3 жыл бұрын

Yea, I got a bunch from china and I have to 100% quality check them. My advice is open it up and check that all the wires connect and check that none of the connections are touching something else metal. Ive seen that a few times. I had one where the horn button was permanently in the ON position and had to separate them. China... thats really all I can say

@Gourmetgamershow 3 жыл бұрын

Did you ever get your right blinker to work?